hyperhive/docs/setup.md

# First-run setup (fresh-deploy bootstrap)

How to bring a fresh hyperhive hive online: provision accounts, open
the gateway, bootstrap swarm SSO, make matrix reachable, and spawn the
first sub-agents.

Aimed at `ruth` (the root/manager agent) on a fresh deploy, but it's a
plain reference doc — read it whenever you need the bootstrap command
sequence. All `hivectl` commands below run as **root on the host** (not
inside an agent container); the `request_*` steps run from ruth's own
turn via the MCP tools.

**Bringing up a hive that does not host its own swarm services?** Read
[`swarm/secrets.md`](swarm/secrets.md) first. Everything below assumes
each credential is generated where it is read, which is true on an
all-local deploy and not otherwise — that page says which files an
operator has to place, and where.

## Step-by-step

### 1 · Forge

```bash
# Provision (or refresh) ruth's own forge account — do this first. Ruth's
# bootstrap bypasses the normal spawn-approval flow (see step 6), so unlike
# every other agent it does not get its forge account auto-provisioned —
# this manual step is still load-bearing.
hivectl forge create-user ruth

# Sub-agents spawned later (via the approval flow in step 6) get their
# forge accounts auto-provisioned — nothing to run here for them.
```

The human operator's own forge account is created via swarm SSO instead of
a manual `hivectl` step — see step 3 (`swarmctl user add`).

### 2 · Gateway (HTTP Basic auth)

```bash
# Add an operator login to the gateway (reads password from stdin)
echo "hunter2" | hivectl gateway create-user mara --password-stdin

# List existing users
hivectl gateway list-users
```

### 3 · Secret store (only when `deploy.bao`)

⚠️ **A sealed store still answers.** OpenBao starts uninitialised and
sealed, so the container is up and the port responds while every read
times out — the failure looks like a hang, not like a store that was
never initialised. Do this before anything is pointed at it.

```bash
# On the host that RUNS the store, once.
bao operator init   # keep the keys it prints and the root token OFF this host
```

Whether anything more is needed depends on
`services.hyperhive.deploy.bao.seal`:

- **`pkcs11`** (the default) — the key is bound to the host's TPM and the
  store unseals itself on every restart. `init` is the only manual step.
- **`shamir`** — no TPM, so `bao operator unseal` is needed again after
  every restart, with the keys `init` printed.

The store serves TLS, and on a hive that deploys it you need do nothing: a
first-boot unit mints a CA of the store's own plus the two leaves it signs —
the store's server certificate and this host's client certificate — and points
`deploy.bao.serverCertFile`, `.serverKeyFile` and `.clientCaFile` at them.

Those are `mkDefault`s, so naming your own paths wins. Do that when your
certificates come from a real internal CA; the store has no opinion about
which. ⚠️ Not the gateway's HTTPS certificates and not the hive CA — this is
**mTLS between services and the store**, a separate trust domain, because a
store that took its identity from an authority it will itself distribute could
never come up before that authority.

Making even the `init` unnecessary is tracked in issue #3768.

### 4 · Swarm SSO (only when `deploy.authelia`)

⚠️ **Required to finish the install, not optional.** Authelia treats an
empty user store as a fatal startup error, so until this runs the
container crash-loops and `auth.<swarm.domain>` answers `502 Bad
Gateway` — a working vhost in front of an upstream that refuses to
start. Skipping this step looks like a broken proxy.

```bash
# Runs as root on the host that RUNS authelia (not necessarily the
# controller host). Prints a generated password once — record it.
swarmctl user add mara --display-name Mara --email mara@example.com --group admins
```

⚠️ **Keep `--group admins`.** It is not decoration: operator-only
surfaces (the swarm UI below) are gated on that group, and an account
without it authenticates successfully and is then refused — which reads
like a broken login rather than a missing group.

If an account already exists without it, `user add` will refuse rather
than amend — adding the group afterwards is `swarmctl user update mara
--add-group admins`.

Detail, including what the password is and why this stays manual:
[`swarm/sso.md`](swarm/sso.md).

### 5 · Swarm UI (only when `deploy.swarm-ui`, on by default with the controller)

Nothing to run — it is served on the swarm apex
(`https://<swarm.domain>/`) as soon as the host rebuilds. Two things
decide whether you can actually open it:

- **You are in `admins`** (step 3). The gateway asks authelia whether
  you have a session; the rule that makes it mean *operator* wants the
  group. Without it you log in and still get bounced.
- **The name resolves to this host.** It is published to the hive's own
  resolver and to `/etc/hosts` when `gateway.localHostsEntry` is on; from
  anywhere else it needs a real DNS record like any other public name.

Detail, including why reachability is deliberately not the access
control: [`swarm/ui.md`](swarm/ui.md).

### 6 · Matrix

```bash
# 5a. Ensure the hive-internal admin account exists first
hivectl matrix sync-admin

# 5b. Provision ruth's own matrix account — same bootstrap-bypass reasoning
# as forge above, still a required manual step.
hivectl matrix create-user ruth

# 5c. Invite the operator to the hive Space (and optionally to rooms)
hivectl matrix invite mara
hivectl matrix invite @mara:yourserver --room '#hive-chat:yourserver'

# 5d. Promote the operator to homeserver admin if needed
hivectl matrix promote-user mara
```

The human operator's own matrix account is created via swarm SSO instead of
a manual `hivectl` step — see step 3 (`swarmctl user add`).

### 7 · Spawn sub-agents

Sub-agent creation goes through the approval queue — ruth proposes, the
operator approves, the container builds. From ruth's own turn (inside
the container, via MCP tools):

```
# Step 1: initialise a new agent's config repo
request_init_config(name: "iris")
# → operator approves → config_ready event lands in the inbox

# Step 2: edit /agents/iris/config/agent.nix and commit it. Then the
# operator spawns iris (dashboard ◆ R3QU3ST SP4WN / Spawn approval),
# which builds + starts the container from that config.

# Later config changes: open a PR on agent-configs/iris (hive-forge);
# the operator reviews + approves it — no MCP tool call.
```

See [`approvals.md`](approvals.md) for the full flow.

### 8 · Useful host commands

```bash
# Roster: all agents, status, rev, parent, pending reminders
hivectl list-agents

# Restart a stuck container (no rebuild)
hivectl agent <agent> restart

# Open a Claude session inside an agent's container
hivectl agent <agent> choom

# Open hive web surfaces in a browser (or just print the URLs)
hivectl open           # operator dashboard
hivectl open forge     # Forgejo
hivectl open matrix    # Matrix GUI (fluffychat)
```

See [`tools/hivectl.md`](tools/hivectl.md) for every `hivectl` verb.

## Security notes

- **No forge admin token is stored in any agent state dir.** Agents
  hold a regular agent token in their `forge-token` file; sensitive
  creds (the core token, the matrix admin token) live on the host.
- All config changes (forge PRs on `agent-configs/<name>`) go through
  operator approval — agents can't unilaterally rebuild containers, by design.
  See [`boundary.md`](boundary.md) and [`security.md`](security.md).
- **Telemetry ingest is authenticated per hive**, and the `hive` label comes
  from which hive authenticated rather than from the payload — so no hive can
  report metrics as another. A first-run all-local hive gets this with nothing
  to configure; joining a swarm you don't host needs one secret copied across.
  See [`observability.md`](observability.md#authenticated-ingest).

Once the hive is running, ruth records anything it needs to remember
across restarts in `/agents/ruth/state/notes.md`.