`DepWhen` was two named cases, so every new combination wanted a new
variant. It is now a set over the terminal outcomes: a `u8` bitset
newtype, no dependency, with `AFTER_OK` / `AFTER_ANY` kept as the two
constants the templates actually use. "Run regardless" is all outcomes,
"anything that isn't a failure" is `{Done, Cancelled}`, a compensation
branch is `{Failed}` — closed under combination, so it never needs
another variant.
`TerminalState` is its own type rather than a subset of `State`, so an
edge cannot name `Pending` / `Running` / `Finishing`. Those are
meaningless in a dependency and are better unrepresentable than
validated against. The empty set is the one thing that can't be typed
away — nothing satisfies it, so `validate` rejects it next to the cycle
check.
Two consequences worth calling out:
- `cascade_cancel` collapses to one rule: a pending node is doomed once
any edge it names can no longer be satisfied. The hardcoded `AfterOk`
special case is gone, and a weak-edged node survives its dependency's
cancellation because of its own edge rather than by exemption.
- The cascade now runs on **any** terminal outcome, `Done` included.
With sets, success rules dependents out just as failure does — a
`{Failed}` branch is unsatisfiable the moment its dependency succeeds,
and leaving it `Pending` would wedge the subtree non-terminal forever.
That is a hang, not a wrong answer, so it is the load-bearing half of
this commit.
Edges are conjunctive, so "any of these N failed" is not directly
sayable. The composition that works is in the tests: the success branch
depends `AFTER_OK` on every root, so it is itself cancelled the moment
one of them doesn't succeed, and the failure branch hangs off *that*
with `{Cancelled}`. Exactly one of the two runs.
Also deletes hive-c0re's duplicate `DepWhen` enum and the
`to_crate_when` translation beside it. The copy bought nothing and had
to be widened in lockstep with the crate's edge model — it is the
in-between layer #2772 exists to remove, and it is what broke the build
when the crate's spelling changed.
All 34 jobq tests pass, including the four new ones covering both
directions of a failure-only branch, weak-edge survival of a cancelled
dependency, and the aggregator composition.
The queue carried a per-DAG `HookKind` that fired an inline side effect
from outside the graph when a container rolled up terminal. mara asked
three times why this could not be an ordinary node; the answer in the
code was a doc-comment claiming a node could not work, and it was wrong.
`DepWhen::AfterAny` already existed with two live users, and a weak edge
is satisfied by a `Cancelled` dep, so a tail node runs on success,
failure and cancel alike. What was genuinely missing was smaller than a
hook: a node had no way to learn how the work it followed ended.
So: `Claim` now carries `deps: Vec<DepOutcome>`, snapshotted at claim
time from the graph the scheduler already holds (no `hive-jobq` change).
`Claim::deps_state()` / `deps_error()` roll that up, and two new kinds
consume it — `ResolveApproval { approval_id }` and `EmitRebuilt { agent }`.
Templates append one as a group-root with `AfterAny` edges onto the DAG's
other group roots; a root's state is its subtree's roll-up, so that
covers every node without fanning out to each of them.
Deleted: `HookKind`, `DagSpec.hook`, `NodeKind::Dag.hook`, `DagMeta.hook`,
`TerminalDag`, `terminal_dag()`, `terminal_summary()`, `dag_agents()`,
`dag_rollup()`, `fire_terminal_hook()`, `run_terminal_hook()`,
`emit_rebuilt()`. `complete_node` returns `()`.
Load-bearing details:
- `JobQueue::cancel` spares tail nodes instead of cancelling the whole
subtree, and returns `bool`. Without this a cancelled approval DAG
would dangle its approval forever — the hazard `tests.rs` already
named. The spared tail's deps are `Cancelled`, which satisfies its weak
edge, so the scheduler claims it and it resolves the row as cancelled.
`hive-jobq` anticipated exactly this: `cancel_node`'s doc already says
to settle afterwards so "a weak-edge terminal node observing the
cancellation" can advance.
- The existing `complete(container)` call after cancelling is kept and is
deliberately a no-op when a tail was spared (a non-terminal child parks
the container back in `Finishing`), so power ops still settle
synchronously with no branch.
- `DeployTail` is NOT `is_tail()`: it does real compensating work, and a
cancelled DAG has nothing to compensate.
- `exec::failure_reason` falls back to `first_error(dag_id)` because a
group root that rolled up `Failed` from a child carries no error of its
own — without it every tail-reported failure would lose its reason.
- `EmitRebuilt` is per agent, so a multi-agent DAG reports each agent's
own outcome rather than painting all of them with the DAG roll-up.
- `ResolveApproval` is agentless: the approval row already names its
agent, and that is also what lets one tail close a multi-agent DAG.
Transients-derived-from-running-nodes and the frontend's node-kind
strings stay out of this change; they touch iris's slice and review
better next to their own diff.
`Template` was a DAG-level enum that three different things read back
out: `terminal_hook()` mapped it to a side effect, the retention pass
bucketed history by it, and a tracing field printed it. None of those
needed a *label* — they needed the two facts the label happened to
encode. So the enum was a lossy stand-in for intent, and every new DAG
shape had to pick the variant whose inferred behaviour matched, whether
or not the name fit (`reparent` rode `MetaUpdate` for exactly this
reason, with a 10-line comment apologising for it).
Replace the inference with a declaration: `DagSpec.hook:
Option<HookKind>`. Only the builder assembling a DAG knows why it did
so, so only the builder can say what should happen when it settles.
`run_terminal_hook` becomes a field read, and `reparent`'s apology
becomes `hook: None`.
Hook assignment is byte-identical to the old precedence rule
(`approval_id.is_some()` wins, then `Rebuild | PermChange`), checked
site by site; `meta_update` is the only builder with a variable
approval id and so the only remaining conditional.
Retention loses the per-template bucket with the enum that keyed it.
The dashboard renders one recent-builds list, so one flat newest-first
cap (`MAX_HISTORY_DAGS`) bounds it. `HISTORY_GRACE_SECS` goes too — it
existed to stop a burst of same-template DAGs evicting each other
inside one poll interval, which is not a failure mode a flat cap has.
That takes `snapshot_capped()` and the `snapshot_no_grace()` test hook
with it.
The queue is runtime-only (empty graph on boot), so the serde changes
carry no migration risk.
The config-PR deploy's apply node still did the whole container rebuild
inline, through the last surviving `lifecycle::rebuild_no_meta` call. It
now merges, opens the two-phase meta deploy, and returns the ordinary
rebuild chain as a subgraph the scheduler grafts into the live DAG under
it. A new `FinalizeDeploy` node, gated on that graft, plants the deploy
tag and commits the staged lock.
Net effect: "did the agent come back up?" is answered by `Reconcile`
succeeding, the same way it is for every other rebuild, instead of by a
fused inline start — and each deploy phase is its own queue node, so the
dashboard shows which one is running.
The grafted nodes root on the apply node, so they land inside
`DeployWindow`'s subtree and re-enter the meta window and build slot it
already holds rather than deadlocking against them. The new happy-path
test runs on a one-slot queue specifically to pin that down.
`FinalizeDeploy`'s two git writes are fatal, deliberately: they are what
tells `DeployTail` a deploy confirmed good, so a node that merely warned
on them could report success while leaving the tail looking at the git
state of a failure — and the tail would then roll a good deploy back.
The trailing `meta::finalize_deploy` stays warn-only, since by then the
container already runs the new config.
The `failed/<id>` annotated tag moves into the tail, which is now the
only place holding a failed deploy. It reads the reason off the DAG via
a new `JobQueue::first_error`, and is gated on `main` having actually
moved — the rollback ref is parked *before* the merge, so its existence
alone does not mean a merge happened, and a pre-merge rejection must not
tag the previous, innocent head.
Removing the last inline rebuild orphaned a chain of now-dead code:
`rebuild_no_meta`, `container_exists`, `Coordinator::set_queue_build_log`
and `JobQueue::set_build_log_id_running`, all deleted here.
A config-PR deploy was one opaque node that fetched, verified, merged,
built and compensated. That shape made three things impossible: the
nix-heavy phases could not take the meta window without the cheap ones
holding it too, a crash mid-build left no node to run the rollback, and
the dashboard could only ever show "deploying" for the whole thing.
Replace it with a `DeployWindow` group root over `MergeVerify ->
DeployApply` (AfterOk) plus a `DeployTail` hanging off the apply with
AfterAny, so the tail runs whether the apply succeeded, failed, or was
cancel-cascaded by a failing verify.
The two-phase approval deploy keeps a bumped `flake.lock` staged
uncommitted for the whole container build, so no other meta mutation may
land inside that span — until now enforced by a process-global
`meta::exclusive()` mutex held inside each executor fn.
A `MutexGuard` cannot outlive the fn that takes it, which is what blocks
decomposing the opaque `ApprovalDeploy` node into scheduler-visible
sub-nodes: the window has to span them. Replace the mutex with
`Resource::MetaWindow`, a global capacity-1 queue resource declared by
every meta-mutating node kind (`NodeKind::needs_meta_window`). Resources
are held by a subtree root across its whole subtree, so a later increment
can hang the deploy's phases under one window-holding parent.
Same global serialisation as before, and the scheduler now blocks a node
from being claimed rather than parking a worker on a mutex.
Split the rebuild's meta preamble out of `Prebuild` into a new `MetaSync`
node. `Prebuild` must NOT hold the window: the old mutex was deliberately
scoped to drop before the multi-minute toplevel build, which only reads
the store, and a cap-1 global held across it would serialise every
agent's rebuild behind every other's. `MetaSync` is a sibling root that
`Prebuild` deps `AfterOk` on — not its parent, since a parent's resource
covers its whole subtree and would reintroduce exactly that problem.
Queue tests: shape assertions gain the extra node, which is the point of
the change (phases become nodes). The concurrency invariants are intact
but observed one step later — the `MetaSync` heads take turns on the
window, exactly as the runtime mutex made them, so those tests now
complete the heads before asserting that the prebuilds overlap.
Replace the in-tree scheduler with the domain-agnostic hive-jobq crate
(merged in #2615): parent-axis grouping + borrow/subtree-reservation
resource model + roll-up completion (State::Finishing).
Host adaptation:
- NodeSpec gains an explicit `parent` axis; templates declare grouping +
sibling ordering directly (deps order execution, parent groups a subtree
whose resource the descendants borrow).
- Rebuild is a nested two-root subtree: Prebuild (root, owns the build slot
for the whole subtree, lease-exempt) -> StopForUpdate (child, owns the
agent lease) -> Swap/PostSwap (children, borrow both); Reconcile is a
separate top-level root (AfterAny Prebuild) so it survives the cancel-
cascade of any failed step (recovery-start invariant) and converges to
the persisted `wanted` on a fresh lease. This is the multi-root
correction to the single-root-chain sketch: node0=root broke lease-
exemption (hoisting the lease onto Prebuild) and recovery-reconcile
(root failure cancels all children).
- Spawn / perm-change / power-ops (stop/start/restart) group-rooted the
same way; per-agent power-op subgraphs stay independent roots so a
multi-agent DAG runs them concurrently, each on its own lease.
- insert_group honours the explicit parent axis (no lease hoisting); the
DAG terminal node deps AfterAny on every group root and runs once the
whole op rolls up. Drop the old Graph::add_dep terminal wiring.
36/36 job_queue tests, full hive-c0re suite green, clippy --all-targets.
Since the boot sweep (#2450) and meta-update cascade (#2476) became
single DAGs that grow subgraphs in-place, nothing constructs the old
fan-out anchors/parents anymore:
- NodeKind::Noop (the old boot_root grouping anchor) — no constructors.
- Template::StartupSweep / Source::StartupSweep (the old fan-out parent
template + cascade-child source) — replaced by Template::Boot and
Source::AutoUpdate/MetaUpdate respectively.
Drops the three variants + their as_str arms + the Noop executor arm, and
refreshes the stale fan-out/anchor doc comments (Boot/MetaUpdate/Source
docs, coordinator.md, dashboard.md). Frontend: the queue-kind glyph moves
from the dead startup_sweep to boot (which had none), and the dead
rqe-source-startup_sweep style is dropped.
No behaviour change — pure dead-variant removal.
With the meta-update cascade (#2476) and startup sweep (#2450) folded
into single DAGs that grow per-agent subgraphs via append_subgraph,
nothing links parent/child DAGs anymore — parent_id is dead.
hive-c0re: drop parent_id from Dag/DagSpec (+ the DagView copy); delete
append_children and cancel_children (no callers); simplify trim_history
(no more terminal-parent-with-live-children guard — a one-big-DAG is
terminal only when its whole graph settles); drop the rebuild() parent_id
param; QueueDag returns just the polled DAG (no fan-out children to
gather). hive-sh4re: drop the DagView.parent_id wire field.
frontend: a multi-step op is one DAG now, so renderRebuildQueue drops the
childrenOf/orphans cross-DAG grouping and renders each entry flat; its
per-agent subgraphs render as nodes within the one row (split by deps).
Removed the dead rqe-child style + isChild plumbing.
Docs + the child-DAG queue tests updated/removed to match.
MetaLock's non-sweep completion now grows one rebuild subgraph per
affected agent into the same DAG (append_subgraph), replacing the
fan-out-child-DAGs + cancel_children dance. Drops NodeOutput.fanout and
scheduler's fanout_specs. meta_update DAG carries Rebuilding transient so
each cascade agent gets crash-watch suppression at Swap (the property the
old child Rebuild DAGs held via their own transient); MetaLock head needs
no lease so the pseudo-agent gets no pill.
append_children/parent_id and child-DAG tests are intentionally left for
the #2453 capstone.
The boot is now ONE DAG, assembled inline in submit_boot_tree — no boot_root
Noop anchor, no per-agent child DAGs, no display-only parent_id grouping: a
sweep MetaLock root (only when something is stale) that grows one rebuild
subgraph per stale agent into the same DAG (via append_subgraph, previous
commit), plus one Reconcile root per drifted agent (independent — a boot
reconcile needs no lock bump).
- submit_boot_tree builds the DagSpec inline; removed the single-use
templates::{boot_root, startup_sweep} builders (inlined per the operator's
"don't force single-use shapes into templates.rs" steer).
- fanout_specs simplified to the meta-update cascade path only — the startup
sweep no longer fans out child DAGs, so its branch was dead.
- test: append_subgraph_roots_on_emitter_and_rebases_local_deps.
Vestigial after this (deliberately left as follow-ups, flagged in the PR):
NodeKind::Noop is now unconstructed (contained to hive-c0re, removable);
Template::StartupSweep is unconstructed but a hive-sh4re wire type
(frontend-coordinated removal).
Hive-wide `stop` / `start` / `restart` emit ONE DAG with a per-agent
subgraph each (concurrent on their own leases) instead of N DAGs — and each
subgraph is now built dynamically from the agent's live running state rather
than a fixed template shape:
- online agent: the full stop→reconcile (restart: stop-for-update→reconcile)
chain; `graceful` prepends signal→drain.
- offline agent: just `SetWanted → Reconcile` (nothing to quiesce/stop; a
restart of a down agent is really a start).
The head `SetWanted` (intent) and tail `Reconcile` (convergence guarantee)
are always present; only the mechanical `Signal`/`Drain`/`StopForUpdate`
nodes are state-conditional. Keeping `Reconcile` in every shape closes the
TOCTOU window — a race-up between the `is_running` read and node exec is
still converged in-DAG (with `StopForUpdate`-noop as the backstop) — with no
reliance on an external reconcile sweep.
The state-aware assembly needs an async `is_running` read, so it moves out
of the pure/sync `templates.rs` into `submit.rs`, layered as pure
`*_chain(running)` → pure `*_spec(targets)` (the unit-test seam) → async
`*_many` (reads live state + submits). `templates.rs` keeps only the shared
pure primitives (`node`/`after_ok`/`rebuild_nodes`).
Callers await the now-async submit fns (server, dashboard, socket_server).
Tests exercise both the online and offline shapes via the pure `*_spec`
seam. docs/coordinator.md shapes updated.
A hive-wide restart was N separate single-agent DAGs (one submit::restart
per agent). Now that agent is per-node (#2445), make it ONE DAG with a
per-agent restart subgraph each.
- templates::restart takes an agent list: each agent gets an independent
subgraph (a head SetWanted(Up) root, then its restart chain), so the N
subgraphs run concurrently on their own leases. One agent = the ordinary
single-agent restart; unifies the old restart + graceful_restart fns.
- submit::restart / graceful_restart stay as single-agent wrappers over
the new submit::restart_many(agents, graceful).
- server.rs handle_restart_all + handle_restart_scoped submit one
restart_many call instead of looping per agent. Infra containers
unchanged (no lease/DAG, synchronous).
Scope: restart + restart-all only. Broad stop+start is the same pattern
(stop/start templates take agent lists) — a follow-up increment.
The durable 'wanted' power intent was written by submit::{start,stop,
restart,graceful_restart,graceful_stop} as a synchronous pre-submit side
effect, then read by the DAG's tail Reconcile. That's not crash-safe
(a crash between the write and the enqueue loses it) and, with agent now
per-node, can't be per-agent in a DAG that spans agents.
Move it into the DAG as a head SetWanted node:
- NodeKind::SetWanted { up } + run_set_wanted executor (fails the node on
a write error, unlike the old warn-and-continue, so a stale intent
never reaches Reconcile).
- LEASE-NEEDING, not lease-exempt: it takes the agent lease so a power-op
DAG's intent-write + reconcile is atomic per-agent. If it were exempt,
two racing ops (restart vs stop) would run both intent-writes up front
and clobber each other before either reconciled — defeating the point
of moving the write into the DAG. (In stale_start the lease is thus held
across the head Prebuild, but that's a no-op there: the agent is down so
prebuild is skipped.)
- templates: explicit SetWanted node 0 on restart/graceful_restart/
graceful_stop, plus dedicated start/stop templates (SetWanted -> Reconcile)
and stale_start (SetWanted(Up) -> rebuild subgraph, reusing rebuild_nodes).
No compose helper / rebuild variant. reconcile_only is now boot-only.
- submit.rs: drop the set_wanted side effect; the stale-rev shape decision
(start vs stale_start) stays submit-side.
All 33 job_queue tests pass (shape/lease tests updated for the head node).
Agent was a single field on Dag/DagSpec, making a DAG structurally
one-agent — a multi-agent op could only ever be N separate DAGs. Move it
onto Node/NodeSpec (and the NodeView wire type), drop it from Dag/DagSpec
(and DagView): a DAG can now span agents.
- lifecycle lease keys on the node's agent, still globally exclusive per
agent across all DAGs (Inner.leases unchanged in shape). A DAG holds one
lease per distinct agent it touches; settle() frees each at DAG-terminal
(per-agent-subgraph early release is a follow-up, only observable with
multi-agent DAGs).
- transient guard keyed (dag_id, agent); cancel-revert + Rebuilt events
walk TerminalDag.agents.
- submit-time dedup removed (a multi-agent DAG has no single agent to key
on); every submit enqueues a fresh DAG. Whether dedup needs reintroducing
is tracked in a follow-up sub-issue.
- templates gain a node(agent, kind, deps) helper stamping the agent onto
every node; meta templates stamp "hyperhive".
Templates stay single-agent in this PR — behaviour is unchanged, only the
representation + wire shape. Multi-agent DAG emission (restart/restart-all/
broad stop+start as one DAG) and the SetWanted-as-a-node change are
follow-ups off #2439.
mara's review on #2436: no submit-await-submit composition, even
server-side. Adds Template::GracefulRestart (Signal -> Drain ->
StopForUpdate -> Reconcile, wanted=Up) mirroring how Restart already
does StopForUpdate -> Reconcile, plus submit::graceful_restart and
templates::graceful_restart. handle_restart_scoped now submits exactly
one DAG per agent up front for both the graceful and non-graceful
case -- no await_dags in the loop anymore.
- deploy-window gate (meta::exclusive) + path-limited meta commits:
a perm/lock/topology commit can no longer sweep an ApprovalDeploy's
staged flake.lock and neuter abort_deploy (regression test included)
- cancel surfaces now buffer terminal roll-ups the scheduler drains,
so a queued approval DAG cancelled by the operator resolves its
approval instead of dangling, and cancelled power ops revert their
wanted flip to the observed state
- hivectl restart / restart-all ride the queue (lease serialization,
transient guard) and restart sets wanted=Up like the old kill+start
- exactly one Rebuilt event per rebuild DAG, emitted at terminal
- StopForUpdate pre-seeds a missing agent_power row from the pre-stop
observation so a rebuild can't strand an unknown agent offline
- history trim keeps terminal fan-out parents with live children
- audit_log back on db::open; swarm.js badge for reconcile DAGs
jobs are now DAGs of primitive nodes (prebuild, stop-for-update, swap,
reconcile, signal, drain, ...) driven by one scheduler with N build
slots + per-agent lifecycle leases. per-agent power intent (wanted
up/offline) is durable in agent_power.sqlite; Reconcile nodes converge
observed state to it. kills the graceful-stop watcher thread, the
deferred-start follow-up, and the cascade pre-enqueue (fan-out on
MetaLock completion instead). tracker: #2166
