The runtime list was exported but only its type was used, so the type is
now written out. The form's pure logic (draft, checks, request body,
change detection) gets tests under node's built-in runner, run by the
existing swarm-ui check.
The classifier settings page showed model and effort only, so the API-key
or ACP runtime could be switched only through a raw API call. It now has a
runtime select, and under ACP the provider's URL, model and prices. A PUT
carries the provider only on the ACP runtime, so the stored record stays
for a switch back. Closes#5249
docs/swarm/inference.md had a table-row suffix pasted before the H1 by a
bad substitution, and the PUT row had lost it; the text is back in the
row.
A failed read of the agent-inference key already applied no cap (an
unreachable swarm must not block subagent work) and warned, but the
warning did not say which agent. It now names the agent and the error,
a test pins that, and subagent.md says a failed read starts anyway.
The max-subagents field stays a text field with a digit pattern: the
review-settings page's numeric field (concurrent reviews) is a TextField
with pattern="[0-9]+" and validation, and no field in swarm-ui uses
type="number". The new field gets the same pattern.
Nothing capped how many subagents an agent runs at once; the operator
wants to set that per agent from swarm-ui (#5234, shape (b)).
AgentInference gains `max_subagents: Option<u32>`. An absent field
decodes as None, so every stored value still parses and means "no cap",
which is today's behaviour.
swarm-controller accepts 1..=32 on PUT. 0 would refuse every start; 32
is far more concurrent claude sessions than one agent container has
memory for, so anything above it is a typo, not a cap.
The subagent daemon already read the agent's agent-inference key for
subagent_models; it now reads it on every start and continue (not only
those naming a model) and refuses a new run once the cap's worth of
names is tracked, counted under the same lock as the name reservation.
Every tracked slot counts: running, starting, a goal run between turns,
and an interrupted one still exiting. A goal re-prompt never goes
through the reservation, so it is never refused. A failed read applies
no cap, as it falls back for models.
swarmctl's `inference set` does GET, merge, PUT; its mirror type now
carries the field so a set from the CLI keeps a cap set in swarm-ui
instead of dropping it, and `get` prints it.
A classifier settings panel under the try-out form reads and saves the model,
effort and how many requested reviews run at once through the settings route.
A save replaces all three; a refused one shows the route's reason and leaves
the form as typed. There is no API key field.
The hive reads the caps about every 30 seconds and a running agent takes a
changed cap at its next spawn or rebuild, so the dialog and the ui doc no
longer say the hive applies a change within seconds.
A resource caps row in the agent details reads GET /api/agents/{name}/limits
and shows the cpu quota and memory max, each reading as the hive deciding
when the swarm sets none. An edit dialog PUTs the filled fields, which
replaces the stored value whole, and a clear action DELETEs it. A refusal,
such as a percentage with a leading zero, shows as the route's reason under
the fields and leaves them as typed.
One card per run, newest first, from GET /api/review-classifier/runs: repo,
PR, head commit, trigger, when, how long, how many classifications and the
outcome as a badge. A card opens to the try-out's result table, the overall
verdict, the reason and the posted review's link. TryOutResult takes the
answer it shows rather than a whole try-out result, and its styles move to
their own file.
The row moves from the per-agent page into @hive/shared so both pages mount
the same one. The terminal's debug rows now follow the preference as it
changes, so rows already on screen hide or show at once instead of only the
rows that arrive after the toggle.
Two read-only routes feed them: GET /api/pulls/repos lists the repos with an
open pull request, and GET /api/pulls?repo=owner/name lists a repo's open
pull requests, highest number first. The page offers the lists through the
browser's own suggestion list and keeps both fields free text, since a run
also works on a merged or closed PR.
A button beside the repo field reads the repo's rules from its default branch into the classification rows, names the file and the commit it read, asks before replacing rows the operator wrote, and shows the route's error without touching the rows.
The repo check takes the endpoint's own character set and refuses . and .. parts. The running and expired messages say a run can last up to half an hour and that a controller restart drops the result.
Two classifications sharing a name made the result table's row key collide, so the form now refuses duplicate names and the table keys rows by position anyway. The page said it stores nothing in the browser, but the result table remembers its column filters like every table does; the header comment and the docs now say that. The row cap's comment says to keep it in step with the endpoint's own cap.
A page to try a review classification against a real PR: repo, PR number and one or more classifications (name, description, polarity, threshold). Run posts to the controller's try-out endpoint and polls until the run is done or failed, saying it is running meanwhile, then shows the review's table, the overall verdict and the head commit. A row that could not run shows its error in place of a reason, and a failed run shows its error. The inputs stay so the run can be edited and repeated. Nothing is stored and nothing is posted to the forge. Route, nav entry and a section in docs/swarm/ui.md.
The details open under the agent badge without dimming or blocking the page; a click outside or Escape closes it. New ui/popover primitive (anchored, portal, no backdrop) with a sample on the components page. A confirm or link dialog opened from inside it stays modal, and the popover ignores clicks and Escape that belong to that dialog. AgentDetailDialog becomes AgentDetailPopover.
pages/agents held the roster page, the terminal page and every component under them. It keeps the two pages; the components move to src/agent, by concern: roster (card, wanted menu, actions), detail (panel body, dialog, inference, linked accounts, link menu) and terminal (preview, input, subagents, stream hooks, favicon), with the shared row type and icon at the top. Moves and import rewrites only.
The failure was recorded but only the roster card drew it, so the details dialog on a terminal page said nothing when a declaration failed. AgentDetail now shows it under the wanted menu, which the roster's detail panel gets too.
The terminal page gets an agent badge (icon and name) that opens the agent's detail panel in a dialog over the terminal, without the terminal preview. The panel body and the actions on an agent (declare a wanted state, link an account, with their confirm and form dialogs) move out of the agent roster page into AgentDetail and useAgentActions, so the roster and the dialog share them. AgentIcon moves to its own file for the same reason.
The agent terminal page swaps the page's favicon for the agent's icon while it is mounted, so tabs of different agents tell apart. A subagent terminal shows its agent's icon. An agent with no icon, or an unreachable controller, keeps the hyperhive mark; leaving the page restores the page's own icon.
swarm-controller now creates `term-main-<agent>` for every live agent, in
the same one-minute pass and with the same config style as
`term-sub-<agent>` (#4897): subjects `$SWARM.term.<agent>` only, max_age
24h, max_bytes 64 MiB, discard Old, max_message_size from the queue's
max_payload. An existing stream is opened as it is. The agent keeps its
plain publish on `$SWARM.term.<agent>` and gets no JetStream subject.
`GET /api/agents/{name}/term/stream` creates an ephemeral push consumer on
that stream starting 100 rows back, so a swarm-ui terminal opens with
recent history and then follows new rows, in order, from one
subscription. Each SSE event carries the row's stream sequence as its id,
and a reconnect's Last-Event-ID resumes after it. Without the stream the
route falls back to the live core subscription it used before.
The stream is `term-main-<agent>`, not `term-<agent>`: an agent may be
named `sub-x`, whose `term-<agent>` would be agent `x`'s subagent stream.
Its one literal subject cannot match `$SWARM.term.<agent>.sub.>`, which
needs more tokens, so the two streams never overlap.
The reader gains `$JS.API.CONSUMER.CREATE.*.*.$SWARM.term.*`, the
extended create form whose last tokens are the consumer's filter. Checked
against nats-server 2.14.4, the trailing `*` also admits a literal `*` or
`>` filter, so a consumer under it reaches any terminal row, main or
subagent; those are rows the reader already subscribes to and reads with
`STREAM.MSG.GET.*`.
Closes#4826
subagent.md no longer says the web UI's model picker offers
availableModels, and the comments in Dropdown, ComponentsPage and
WantedMenu no longer point at the deleted per-agent Picker.
The agent detail panel shows the model and effort an agent runs on with
where each comes from, plus the swarm's subagent model list. An edit
dialog sets the swarm value (PUT) and a clear action removes it (DELETE).
Reads the configured/effective view, and shows the stored values alone
until an agent has reported what it runs on.
The header on `$SWARM.agent-state.<agent>` went out only when a bus event
changed it, and the core subject keeps nothing for a late subscriber. An
idle agent therefore said nothing to a reader that attached after its
last change: swarm-controller after a restart showed `effective: null`
for that agent until its next turn, which can be hours.
The publish loop now also wakes every 60 s and re-sends the current
header through the same `publish` path (clearing the dedup state first).
Transitions still go out as they happen. Same subject, same grant.
An agent whose queue connection is down now logs `swarm agent state:
publish skipped` once a minute even while idle, so the
`hh-swarm-agent-state-publish-skipped` alert also fires for idle
disconnected agents, not only busy ones.
Refs #5034
Each agent now reports the model and effort it runs on, and where each
comes from (`swarm`, `agent_nix`, `local_file` or `default`), in its
turn-state header on `$SWARM.agent-state.<agent>`: `effort`,
`model_source` and `effort_source` join `model`. The shared
`swarm_queue_client::agent_inference::{Effective, Source}` types spell
those fields for both ends.
The Bus keeps a source next to the model and effort. `Bus::new` takes it
from the local fallback chain (`harness_state::local_model` /
`local_effort`, which now return the source with the value), a `/model`
or `/effort` pick sets `local_file`, and the swarm poller sets `swarm`
or, on a clear, the local chain's source. A swarm value equal to the one
the agent already runs is now applied once, so the source moves to
`swarm` and the header is republished; before, `next()` skipped it as
unchanged.
swarm-controller subscribes to every agent's header with the reader
grant it already holds for the state relay, and keeps the latest
inference fields per agent in memory (`inference::Reported`).
`GET /api/agents/{name}/inference` now answers
`{configured, effective}`, `effective` being `null` until the agent's
first header with these fields since the controller started.
`swarmctl agent inference get` prints both; `set` reads `configured`.
Refs #5034
A start in the past fires the latest missed time once, right away, so the
form says that instead of 'already passed'. A one-shot past its time reads
'past' / 'time passed' (the controller's clock, not a record of firing) and
keeps its pause button. The edit form compares against what it opened with,
so a schedule changing under it is not reverted on save.
/schedules lists the controller's scheduled prompts as cards: name as the
title, the agents it fires for, the message, its cadence and next fire.
Edit turns a card into its own form; pause, resume and remove act in place,
and + schedule opens an empty form. The form sends only what changed, so a
rename never moves the fire times, and warns when the start or the repeat
does. Filters reuse the shared card filter bar.
Adds a TextAreaField to the ui kit, and an upcoming mode on RelativeTime so
a next-fire time reads "in 5m". Needs the controller's /api/schedules
routes.
All badges in the floating row take the interactive 2.75em height so the
state badges match live and expand. The embedded preview wraps them onto a
second row in the narrow details panel, so its top padding now fits two
rows (and the preview cap grows to match); the full tab keeps one row.
The floating row over the terminal now spans its top edge: the state
badges (connection first, then the turn-state ones, which move over from
the top-right corner) on the left, the expand trigger on the right.
The connection badge takes the trigger's height. The row passes pointer
events through its empty middle.
They sat in a toolbar row above the terminal box. They now float in
its top-left corner, next to the turn-state badges in the top-right,
and the toolbar row is gone. The full-tab mount keeps the connection
badge and, being the destination already, has no expand trigger.
The subagent list endpoint now returns {name, last_row_unix} per
subagent, the publish time of its newest terminal row, read from the
queue controller-side so agents publish nothing new. The panel sorts
newest first, shows a ticking age beside each name, and dims one quiet
for 15 minutes.
Closes#4928
The three link-account badges were wider than the agent detail panel and
spilled out of it; they are now a single badge opening a dropdown of the
three kinds. The subagents row, heading included, is not rendered for an
agent that has none.
The agent terminal tab now takes the whole window except the header bar,
full width and height, instead of sitting in the padded content column.
The connection badge floats inside the terminal's top-left corner and the
toolbar row above it is gone on this route.
Codeberg does not accept AI-assisted contributions, so it should not be
the example we put in front of operators. The placeholders now read
myforge / forge.example.org; the tests use the same neutral names.
The agent view in the swarm UI gets a message box. The text reaches the
agent's harness straight from swarm-controller over the swarm queue and
becomes an inbox turn from the operator's authelia username. hive-c0re is
not in the path.
- gateway: `/api/` forwards authelia's `Remote-User`, replacing any the
client sent.
- swarm-controller: `POST /api/agents/{name}/input` takes that header as
the sender (401 without it) and sends `{from, body}` as a NATS request
on `$SWARM.input.<agent>`. No subscriber is a 503.
- swarm-nats-auth: the controller is granted publish on `$SWARM.input.*`;
no hive or agent grant names the family, so the harness can trust
`from`.
- hive-agent: a task subscribes to the agent's own input subject and
pushes each message into the serve loop's existing reminder channel,
renamed `local_msg_*` since it now carries both.
The harness does not reply to the request: no agent grant covers a reply
subject. The controller therefore answers 202 once the request times out
(2s) and 503 on the server's no-responders status.
Closes#4828
The matrix, forge and github link routes wrote their credential
unconditionally, so linking a name that was already linked replaced the
working account. For matrix that lost the device the agent's crypto store
belongs to (#4838).
Each route now reads the account's store path first and answers 409,
naming the existing account, when something is stored there. Nothing is
written. Replacing an account takes the delete from #4899, then a link.
The matrix route checks before password mode's login, so a refused link
mints no new device at the homeserver.
The check is a read then a write, not an atomic step; two concurrent
links to one name can still both pass it.
Closes#4856
An agent's subagent daemon publishes each subagent's output as terminal
rows on `$SWARM.term.<agent>.sub.<subagent>`, as the agent, into a
per-agent stream it creates itself; swarm-controller lists an agent's
subagents from that stream's subjects and relays one subagent's rows as
SSE; the swarm UI lists them under the agent's terminal preview and
reuses AgentTermPreview, full-screen tab included, with no input.
- swarm-nats.nix: the agent token may also publish
`$SWARM.term.{agent}.sub.>` and `$JS.API.STREAM.CREATE|INFO` on
`term-sub-{agent}`, and nothing else of JetStream. A module-eval arm
pins the agent-token grant as an exact list.
- mcp.nix: hive-subagent-daemon loads the agent's store identity
(`hive-agent-bao-cert/-key/-server-ca`, the ones hive-agent loads)
whenever the agent has a store, not only on the opencode preset. The
agent's own queue secret lives in the store, so this is the credential
the harness connects with.
- hive-subagent-mcp: `swarm_term` reads the agent's queue secret under
that identity, connects with the agent token, opens or creates
`term-sub-<agent>` (max_age 24h), and publishes classified rows from
the sink every subagent line already passes through. The sink only
queues (bounded, drop-and-count); a missing store, refused credential,
failed stream create or failed publish is a log line.
- The stream-json classifier (`stream_enrich`) and the `TermMsg` row
types plus `fit` move from the hive-agent binary into hive-sh4re, so
the subagent daemon publishes the rows AgentTermPreview already
renders. hive-agent keeps its LiveEvent classifier on top.
- swarm-controller: `GET /api/agents/{name}/subagents` and
`GET /api/agents/{name}/subagents/{subagent}/term/stream`.
- docs/swarm: what the UI shows and what the queue carries.
Closes#4827
Addresses argus review comment 90297 on PR #4899:
- swarm-controller/README.md: list the three DELETE routes (including
matrix's ?revoke=true) beside the PUT/GET ones already documented.
- LinkedAccounts.tsx: a delete answering 404 means the account is
already gone, so treat it as the delete's end state — re-fetch and
close the dialog instead of showing an error.
- matrix_account.rs: matrix_logout treats a 401 M_UNKNOWN_TOKEN as the
token already being revoked and proceeds with the delete; every
other logout failure still keeps the account. Adds unit tests and
updates docs/swarm/ui.md to match.
Each row of an agent's linked accounts, except its own `main` matrix
account, gets a delete action. swarm-controller serves DELETE beside each
PUT (matrix-accounts/{account}, forge-accounts/{label}, github-account),
answers 404 for an account the store does not hold, refuses `main`, and
removes every version through `delete_all_versions`.
The matrix confirmation has a revoke checkbox, off by default: the
controller logs the stored token out at its homeserver first, and keeps
the account when that fails or no homeserver is stored.
The controller's policy gains `delete` on each agent's
`metadata/.../matrix/+`, `forge/+` and `github-token`, pinned in
bao-grants.nix.
Refs #4855
The detail panel makes one request for the agent it shows,
GET /api/hives/{hive}/agents/{agent}/linked-accounts, which returns every
matrix, forge and github account of that agent as names and hosts. The
all-agents route and the table's matrix-column rows are removed, so the
table makes no linked-accounts request. The panel stays keyed by
hive/agent. The bao grant is unchanged.
Refs #4855
GET /api/agents/linked-accounts returns one entry per agent that
/api/agents/status has a row for, as {hive, agent, accounts}, from one
store login. The agents page fetches it once (and again when a link dialog
closes) and hands each table row and the detail panel its agent's slice,
so the page makes no per-agent request. The per-agent route had no caller
left and is removed. The bao grant is unchanged: the same list on each
agent's matrix and forge metadata directories.
Refs #4855
Selecting another agent kept the previous agent's rows on screen until
the new fetch landed. Keying both mounts by hive/agent remounts the
component on an agent change; a version bump still refetches in place.
Refs #4855
GET /api/hives/{hive}/agents/{agent}/linked-accounts returns one row per
account linked to the agent, as kind, name and host: each matrix account
under swarm/agents/<agent>/matrix (with its homeserver, and the agent's own
`main` marked reserved), each forge label under swarm/agents/<agent>/forge
(with its url), and github when swarm/agents/<agent>/github-token exists
(host github.com, which is not stored). No credential field is in the
response type.
Listing those two directories needs a new controller grant: `list` on
secret/metadata/swarm/agents/+/matrix and .../+/forge only, pinned in
bao-grants.nix as the only metadata stanzas under agents/ beside the queue
revocation. Checked against a dev OpenBao 2.6.3: the grant lists those two
directories and is refused on agents/, agents/<agent>/, and a leaf.
The swarm UI agent detail panel shows all rows under "accounts"; the table
view's matrix column shows the matrix rows. The link badges stay.
Refs #4855
- docs/web-ui/README.md: drop the removed Credentials tile from the
H0M3 hub list.
- api-error.ts, hive-warn.js: rewrite comments pointing at
dashboard/src/credentials.js and credentials.html, now deleted, to
state what the code does instead.
- swarm-secret-client/src/github.rs: correct the Credential.value doc
to the actual read command (bao kv get -format=json | jq
.data.data.value), keeping the load-bearing-field-name point.
- github-token.nix, agent-github-bao.nix, LinkGithubAccountForm.tsx:
restate added comments as current behaviour instead of changelog
wording ("has always had", "holds the token now").
Refs #4347
An operator links an agent's GitHub personal access token in the swarm UI
(LinkGithubAccountForm, "link github account" on /agents). swarm-controller's
PUT /api/hives/{hive}/agents/{agent}/github-account stores it at
swarm/agents/<agent>/github-token (swarm_secret_client::github), a flat leaf
under the agent's prefix that the agent's existing read grant already covers:
no policy change, and no list grant, since there is one token per agent.
In the agent, hive-agent-github-token (oneshot + 2-minute timer, as the agent
user, under its own store certificate, ordered before hive-github-notify)
reads that path and writes <state>/github-token, 0600 and agent-owned, the
file the gh wrapper, git credential helper and hive-github-notify already
read. It replaces the file by rename only when the bytes changed and never
deletes it: a hive-written github-token stays until a token is linked in the
swarm UI. It is installed only with a store address and
services.hyperhive.agent.github.enable.
Removed: the dashboard's CR3D3NTIALS page (credentials.html/js/css, its
build entries and H0M3 tile; GITHUB was its only tab), hive-c0re's
dashboard/matrix_accounts.rs with GET/POST /api/github-account,
priv_client::write_agent_github_token, the host socket's
SetAgentGithubToken and `hivectl github set-token`, and hive-priv's
WriteAgentGithubToken with write_agent_state_file, its only caller gone.
Docs: integrations/github.md and swarm/ui.md describe the swarm path,
swarm/credentials.md gains the store-path row, and the hive UI docs,
hivectl docs and security.md's hive-priv table drop the removed pieces.
Closes#4347
An operator now links an agent's external forge account (label, base URL,
token) in the swarm UI. swarm-controller stores it at
swarm/agents/<agent>/forge/<label>. There is no index: the store's
listing of the agent's forge/ directory is the set of accounts.
In the agent, hive-agent-forge-accounts (oneshot + 2-minute timer, as
the agent user, under its own store certificate) lists
swarm/agents/<agent>/forge/ with the `list` #4866 grants an agent on its
own metadata subtree, reads each account, and writes
<state>/forge-<label>-token and forge-<label>.json in the names and shape
hive-forge -f already reads. An empty listing (a 404, which `bao kv list
-format=json` answers with `{}` and an empty stderr) is zero accounts; a
denial or an unreachable store fails the unit. It never deletes: files
for labels not listed, including ones the hive wrote, stay as they are.
Removed: the dashboard FORGES tab (credentials.js/html section and its
CSS), hive-c0re's extra_forges.rs and its routes, priv_client's
extra-forge calls, and hive-priv's WriteAgentExtraForgeAccount /
DeleteAgentExtraForgeAccount with their helpers. The GITHUB tab and
WriteAgentGithubToken stay.
Also: persistence.md's matrix avatar note names the exit-75 restart on a
changed account listing, not the dashboard, as what brings a linked
account up.
Refs #4348
hive-matrix-daemon now learns which external matrix accounts it has from
the swarm secret store, under the agent's own certificate, and the hive
push chain for matrix is gone.
The daemon lists swarm/agents/<agent>/matrix/ (the `list` its policy
grants on its own metadata subtree), reads each account's homeserver
from its credential, and brings the accounts up with their tokens from
the store. Every two minutes it lists again and exits with 75 when the
set of linked accounts changed; the unit restarts on 75 without counting
a failure. A listed name whose credential reads as absent is skipped and
logged once. At start it removes the matrix-token-<a> /
matrix-account-<a>.json pairs a hive delivered (a sidecar marks a pair
as delivered; a declared tokenFile keeps its token).
Removed: CredentialNotice and the $SWARM.credential.* subject and NATS
grant, the controller's publish and its queue precondition on the PUT
route, hive-c0re's credential subscription arm and workers/credential.rs,
priv_client::write_agent_matrix_token, hive-priv's WriteAgentMatrixToken
and its helpers, and the daemon's state-dir account discovery.
Kept: WriteAgentGithubToken and the external-forge path
(WriteAgentExtraForgeAccount, extra_forges.rs) are untouched, and a
declared matrixAccounts tokenFile is still read when the store has no
token for that account.
Refs #4348
