The CI runner was a hive deploy module: hive-ci.nix ran it beside the
forge, and hive-c0re registered it through the forge's admin API with
the `core` token, writing the registration token through hive-priv. It
could only run on the forge's host, and it kept an admin-scoped forge
token on a hive.
Now the runner is a swarm service:
- swarm-ci-runner.nix runs it in a `swarm-ci-runner` container on the
host that sets deploy.ci-runner.enable, reaching the forge by name.
It needs neither the forge nor a hive there.
- swarm-controller reads the forge's runner registration token with its
own admin token and writes it to swarm/services/ci-runner/
registration-token whenever it differs from what it last wrote. Its
grant on that path is create/update only.
- The runner's own leaf (CN swarm-ci-runner, role and policy of the same
name) reads that one path. swarm-bao-ci-runner.service fetches it into
the runner's EnvironmentFile and restarts the runner on a change.
- A pre-start step removes .runner when the daemon's journal since its
last start holds Forgejo's "unregistered runner" refusal (the daemon
exits 1 when its startup Declare gets it), or when .runner names
another forge address; upstream's pre-start step then registers again.
Removed from the hive side: hive-ci.nix and deploy.forgejo.ci.*,
forge/ci_runner.rs, PrivRequest::RegisterCiRunner and its handler and
ReadWritePaths entry, InfraContainer::Ci with hivectl's --ci and the
dashboard's hive-ci journal entry, HYPERHIVE_FORGE_CI_ENABLED, and
read:admin,write:admin from CORE_TOKEN_SCOPES: nothing else in hive-c0re
calls /api/v1/admin/*. The old ci options, under both swarm.forge.ci and
deploy.forgejo.ci, now fail evaluation naming deploy.ci-runner.
The forge's half of the old ci.enable, the actions/checkout mirror and
DEFAULT_ACTIONS_URL = self, is deploy.forgejo.actionsFromSelf.
Closes#4954
Agents keep git worktrees and cargo target dirs under /home/<agent>,
which lives in the container rootfs and is deleted on destroy. They
can't move them under state/, because a claude started there walks up
into state/CLAUDE.md and takes on the agent's identity.
Add a per-agent work/ dir next to state/ on the host
(/var/lib/hyperhive/agents/<n>/work), bind-mounted RW at
/agents/<n>/work. hive-c0re creates it in ensure_state_dir and in
set_nspawn_flags (the rebuild path reaches only the latter), the
agent's activation chowns it to the agent user like state/ and
harness/, and measure_agent_disk counts it. destroy never touches the
agent root, so work/ survives it; purge removes the whole root, so
work/ goes with it.
Closes#4977
The operator admin sync now also takes homeserver admin away. It records
each user id it sends `make-user-admin` for in
`operator-matrix-admins.json` under the controller's state directory
(written to a temporary file and renamed over it; a missing file is an
empty set). On each pass, a recorded account that is no longer in
authelia's `admins` group but is still joined to `#admins:<server>` is
sent `!admin users force-leave-room <user> <admin room id>` as `@swarm`,
over the same `/_matrix` path the grant uses. Leaving that room is what
ends tuwunel admin.
It never revokes an admin it didn't grant, `@swarm`, tuwunel's server
user (`@conduit:<server>`), an agent's account (the store's
`hive-agent-*` cert roles, the same roster the agent account mint uses),
or anyone in the new `services.hyperhive.swarm.matrix.adminSync.ignoreUsers`
list. That list reaches the daemon as
`SWARM_CONTROLLER_MATRIX_ADMIN_SYNC_IGNORE_USERS`. It also never sends a
revoke that would leave `#admins` with no member besides `@swarm` and the
server user.
A revoke is sent at most once per account per controller process, like a
grant. A recorded account that is out of both the group and the room is
dropped from the file.
Closes#4799
State where `enable` and the matrix name pins are now rather than where
they moved from: swarm-grafana-service, swarm-nats-service,
hive-matrix-service (and the bao-controller fixture comment quoting it),
plus the same-shaped history in agent-modules/otel, checks and
docs/default. Comments and option-description text only; no script
string changes. Refs #3902
Rewrite the remaining narration in files the previous commit touched:
"moved"/"sat"/"was REMOVED"/"old default" comments in swarm-bao,
swarm-otel, glue-bao-tls, nats-authelia, swarm-controller, swarm-ui,
swarm-otel-service, swarm-authelia-service, the deploy.nix rename table,
hive-ci, hive-forge/service, hive-tls, hyperhive, swarm-nats, swarm.nix
and a few module-eval fixtures, so each says where a thing is or why it
is so now.
Revert the comment edits inside shell script strings in hive-tls,
swarm-nats and the forge token mint to their previous text, so those
generated units are unchanged. The only unit still changing is
swarm-bao-pki (two comment lines in its script). Refs #3902
Rewrite comments and option descriptions under nix/ that narrate how the
code got here ("used to", "new name", "sat at the TOP", "no longer",
renamed/moved narration, attributions) to say what the code does now and
why. Comments and description strings only; no logic changes.
Files in open PR #4970's diff are left alone. Refs #3902
The shared `hive` fixture turned `deploy.hive-controller.enable` on for
every eval test. It is now off by default; `hiveWithController` turns it
on, and the fixtures whose claims read the hive tier (hive-c0re, the
queue-agent credential, the hive leaf, `deploy.hive-controller.*`, or an
absence that is only meaningful with a hive present) use it.
glue-nats-auth-bao-identity.nix still read the renamed
`services.hyperhive.enable`, which printed the "Obsolete option" trace
six times per CI run. The term is dropped: the pairing is gated on the
queue and the minted PKI, as its sibling glue-nats-bao-identity.nix is.
An unpublished or empty secret in swarm-bao-nats-auth-oidc and
swarm-bao-matrix-oidc now exits 1 instead of 0, the shape
swarm-bao-forwarder-oidc already uses. storeRetry then re-fetches every 30s
until swarm-secret-publish has written the secret, and refresh_consumer
starts the responder / tuwunel once the file lands. Before, a fresh swarm's
first fetch found nothing, exited 0, and neither consumer started until the
unit was restarted by hand.
The three client registrations move into glue-{controller,nats,matrix}-oidc-client.nix,
gated only on deploy.authelia.enable and reading their ids from swarm.* options,
so the host running authelia registers every one of them whichever host runs
the service. The matrix callback is a new read-only swarm.matrix.sso.redirectUri,
read by both the homeserver's config and its client entry.
swarm-secret-publish now also publishes the queue's and the homeserver's minted
secrets to swarm/services/<id>/oidc/client. The queue host reads its responder's
secret there with swarm-bao-nats-auth-oidc under the responder's own leaf
(swarm-nats-auth role gains that one read path), and the homeserver's host with
swarm-bao-matrix-oidc under matrix-ctl's leaf (swarm-matrix-ctl role gains its
one read path). The host-file copies are gone: swarm-nats-auth-secrets now
delivers only the callout seeds and the store identity, and
hive-matrix-oidc-secret is removed. A fetch unit whose leaf is unset still
renders and fails naming the option pair.
Closes#4943
Every hive's homeserver loaded a per-hive `hyperhive` appservice
registration, and the swarm minted and delivered an as_token for it
through bao. No client presented that token: swarm-controller creates
every `@hive-<hive>` sender and every agent account with the swarm
appservice token (hive_sender.rs, agent_token.rs), and no Rust code read
the per-hive one.
Removed, with everything that existed only to serve it:
- hive-matrix.nix: the `hyperhive` registration, its activation-time
render, the host bind mount of /var/lib/hyperhive/matrix-appservice,
its LoadCredential entry, and the internal options
`deploy.matrix.appserviceTokenFile` / `appserviceRegistrationScript`.
tuwunel now loads only the swarm registration.
- glue-matrix-bao-token.nix and its `swarm-bao-matrix-token` unit.
- glue-bao-tls.nix: the matrix-token leaf and its defaults.
- swarm-bao.nix: the `swarm-matrix-token-<hive>` roles and policies
(`swarm-bao-matrix-token-policy`), and the options
`deploy.bao.matrixTokenClient{Cert,Key}File` and
`matrixTokenCommonNamePrefix`, now mkRemovedOptionModule.
- swarm-secret-publisher.nix: the per-hive token mint and its state dir.
- swarm.nix: the reserved `<matrixTokenCommonNamePrefix>-<hive>` CN.
- swarm-secret-client: `matrix::appservice_token_path`.
The swarm registration (swarm-matrix-ctl, swarm-controller) is untouched.
Comments and docs that pointed at the removed glue file now point at
glue-queue-agent-credential.nix, which has the same reader shape.
Refs #4428
config-changes.md (was approvals.md) describes config PRs, the meta flake
and helper events; the approval queue, its kinds, the withdraw path, the
job-queue dispatch and ApprovalResolved go. Every other page drops the
approvals table, endpoints, event, tool group, hivectl verbs, dashboard
section and the loose-end/cancel kind, and links to the renamed page.
Y3R C4LL is the operator inbox alone: no P3NDING APPR0VALS section, no
approval cards or history, no approval_resolved subscription, no
approval browser notifications, and the tab count and title prefix count
unread operator messages only. The H0M3 tile text drops "approvals".
The deny form was the only data-prompt form, so bindAsyncForms' prompt
branch, themedPrompt and its dialog styles go too, along with the
approval-only CSS (.approval*, .approvals-history, .btn-deny, the
status/glyph colours and .history-note).
Nothing submits an approval since scheduled prompts left hive-c0re, so the
queue only acted on rows written before that.
- hive-c0re: the approvals store and its migrations, approve/deny/
resolve actions, the ResolveApproval tail node (and meta_update's
approval_id), POST /api/approve and /api/deny, the approval views on
/api/state, the approval_resolved dashboard event, the orphan GC,
destroy/purge failing pending rows, and the approval rows in
get_loose_ends. DestroyBookkeeping loses the purge flag, which only
worded the approval-failure note.
- The CancelLooseEnd request goes: its only hive-c0re arm was the
approval one. cancel_loose_end handles reminder and todo in the harness.
- Wire types: hive_sh4re::approvals (ReminderStats moves to inbox),
LooseEnd::Approval, CancelLooseEndKind, HelperEvent::ApprovalResolved,
ToolGroup::Approvals, HostRequest::{Pending,Approve,Deny} and
HostResponse.approvals. HOST_SOCK_VERSION goes to 2 for the removed
field.
- hivectl loses the approvals verbs; docs/tools/hivectl-cli.md is
regenerated.
- The system prompt drops approval_resolved.
- The approvals table stays in broker.sqlite, unread, the same way the
operator_questions table was left when its store was removed.
- An `approvals` entry still in tool-groups.json is skipped with a warning
by ToolGroup::parse_list, like any unknown group.
- docs/agent-lifecycle/approvals.md is renamed to config-changes.md so the
code's doc pointers resolve; its content follows in the docs commit.
The hive policy rendered by policy::render granted every hive cert read
on secret/data/swarm/services/*, which holds each swarm service's OIDC
client secret. No reader of that tree authenticates with a hive cert:
grafana, the otel collector and the store forwarder each read with
their own leaf, and the bao UI's secret is read by the store's granter.
render() now emits two stanzas: swarm/agents/* and the hive's own
swarm/hives/<hive>/*. Kind::Service had no other caller and is removed.
Docs and comments that described the grant as a decision are rewritten
to the current state.
Closes#4960
The handlers read the agent's status only to learn whether it has ever reported; no hive is used to build the stream. The 404 and 500 messages and their OpenAPI descriptions now say that.
Docs (review on #4948): the harness's restart settings are not useful to
a reader, so the `Restart`/`RestartSec` bullet in docs/turn-loop and the
"30 seconds later, no start limit" wording in docs/swarm are removed.
What stays is the behaviour: the harness exits and comes back until the
queue accepts it.
Grant: with the harness's shared-client fallback gone, nothing presents
the hive's shared agent client (`hive-<hive>-agent`) to the queue;
swarm-logs uses that OIDC client over HTTP only. swarm-nats-auth now
refuses it outright instead of granting the configured
`$SWARM.term.{hive}.>` / `$SWARM.agent-state.{hive}.>` publish and its
`_INBOX.client.<id>.>` subscribe, so an agent holding it can no longer
publish as a sibling. The agent arm still runs before the hive arm, so
that id never falls through to its hive's grant.
Removed with it: the `--agent-publish-subject` flag and its two uses in
swarm-nats.nix, `Policy`'s agent subject list, and
swarm-queue-client's `client_inbox_prefix`. The module-eval now asserts
the flag is absent; the policy tests assert the refusal and that the
hive itself is still admitted.
An agent's harness connects to the swarm queue with the agent's own
credential or not at all. The first connect retries after 5s, doubling
(7 attempts, about five minutes), with a warning per failed attempt;
when every attempt fails the harness logs an error and exits 1. Missing
coordinates (HIVE_AGENT_NATS_URL, or the secret store's BAO_ADDR /
HIVE_AGENT_NAME / certificate) fail the boot outright.
Previously the first connect's outcome was memoized for the life of the
process: a store 403 or queue refusal at boot left the agent on the
hive's shared client, or disconnected, until someone restarted it, and
an agent with no queue coordinates ran on without one. Both paths are
gone, with the hive-scoped subjects that only the shared client used.
The harness unit now restarts after 30s instead of 2s, so a swarm-wide
outage doesn't restart every agent every 2s, and has no start limit, so
it keeps coming back however long the outage lasts.
The hive's shared client credential is still imported into the harness
unit for swarm-logs; the two HIVE_AGENT_OIDC_*_FILE variables that
pointed the harness at it are dropped, as is the unset
HIVE_AGENT_OIDC_CA_FILE override.
With the fallback gone, the pieces #4944 added only for it go too:
swarm_input's skip-on-shared-client branch and swarm-queue-client's
connect_with_inbox_prefix. swarm-nats-auth's grant for the hive's shared
agent client is unchanged.
Closes#4909
Drops docs/tools/scheduling.md and every description of hive-level
schedule creation, the worker, the removed MCP tools, the scheduling tool
group and the removed endpoints/events, pointing at docs/swarm/schedules.md.
The tab lists the rows left in the hive's store so the operator can
recreate them with `swarmctl schedule add`: no create row, edit form,
fire/pause/cancel buttons or schedules_changed subscription. The next
column shows the stored next fire time as an absolute UTC timestamp (the
value for --at) instead of a countdown. A warning banner says the page is
slated for removal and points at swarmctl. The approvals view drops the
schedule_prompt card and the approval_added subscription.
Scheduled prompts are swarm-level now (swarmctl schedule, #4936). The hive
keeps the rows it has only so the operator can copy them over.
- hive-c0re no longer fires anything: the scheduled-prompts worker is gone,
and with it every create/edit/cancel/pause/resume/fire path (dashboard
endpoints, agent-socket verbs, the SchedulePrompt approval kind and its
approve handler). The store keeps open + list; GET /api/schedules stays.
- A v6 approvals migration drops schedule_prompt rows.
- Nothing submits approvals any more, so the submit path goes too:
Approvals::submit_kind (now a test fixture), the ApprovalAdded dashboard
event and its emitter.
- Coordinator::push_todo, whose only caller was the worker, goes, and with
it hive_host_sock::agent_todo_socket and hive-c0re's hive-agent-sock /
hive-sock-client deps.
- The schedules_changed dashboard event goes; nothing mutates the rows.
- Agents lose request_schedule_prompt, cancel_schedule, fire_schedule_now,
edit_schedule and list_schedules, the `scheduling` tool group, their
system-prompt line and their transcript formatters. `remind` is unchanged.
sync_agent no longer runs ensure_user_email, ensure_repo_creation_disabled
or ensure_config_repo. swarm-controller does all three before any deploy:
CreateForgeUser sets the account email and max_repo_creation = 0 (and the
agent_token backfill re-runs CreateForgeUser), CreateRepo creates and
protects agent-configs/<agent>, AddRepoMember grants the agent write on it,
and InitAgentConfigRepo seeds it.
What goes with them: the email-aligned and repo-creation-disabled marker
paths and the legacy email-marker relocate, sparse_edit_user_option,
is_forbidden and its tests, and ensure_org_repo. A config repo deleted by
hand is no longer recreated on the next spawn; the operator recreates the
agent at swarm level. Comments in swarm-controller that described the
removed hive passes now state only the current behaviour.
Closes#4848
GET /api/agents/{name}/subagents reads each subagent's newest row with
get_last_raw_message_by_subject, which publishes
$JS.API.STREAM.MSG.GET.term-sub-<agent>. The controller's NATS grant had
no STREAM.MSG.GET, so every lookup was refused and waited the 10s request
timeout, one subagent after another; six subagents passed nginx's 60s.
Grant `$JS.API.STREAM.MSG.GET.*`. A wildcard matches a whole subject
token only, so a `term-sub-*` spelling would name one stream literally;
`*` is the narrowest grant that covers the per-agent streams, the same
width as the controller's STREAM.INFO.* grant.
The lookups now run concurrently (16 at a time) with a 2s timeout each.
A lookup that fails or times out lists its subagent with a null
last_row_unix, and one warn per request names how many failed and the
first error.
The hive-domain vhost renders only where a hive runs. On a host without
one the only certificate is the swarm-services leaf, which does not name
the hive domain, so a homeserver host without a hive serves matrix on the
homeserver's own name only; apex matrix discovery is #4878.
Comments and test names describe the code's current behaviour.
Refs #4588
The hive-domain vhost renders where a hive or the homeserver runs. Its
matrix .well-known JSON and /matrix/ redirect are served wherever the
homeserver runs; the dashboard, swagger UI, agent routes and the
agents.conf include only where a hive runs, since they proxy to hive-c0re.
The gateway doc's vhost map says which rows exist without a hive, and the
trust-bundle text describes ca.pem by what it is rather than as retired.
Refs #4588
A gateway host without a hive whose only swarm name is the store's UI no
longer waits for swarm-services-cert: its nginx carries the stream
passthrough to the store and must come up while the store is sealed. Until
the services leaf lands, hive-gateway-self-signed-cert installs a throwaway
self-signed pair on the default and swarm-services paths there; on a host
without a hive it never references the hive leaf.
A host without a hive also no longer mints the hive-leaf identity or
defaults the options pointing at it, and does not render the hive-domain
vhost, whose upstream is hive-c0re.
Refs #4588
A self-signed gateway on a host with deploy.hive-controller.enable off
(a dedicated swarm-services host) needed the hive leaf for its catch-all,
and that leaf now comes only from hive-tls-resign with a per-hive store
identity. hive-tls-resign and its timer are now defined only where a hive
runs; elsewhere hive-gateway-self-signed-cert installs the swarm-services
leaf as the default cert, and the gateway waits for swarm-services-cert.
Also corrects the hive-gateway comments and option text that still said
the leaf is hive-CA-signed.
Refs #4588
hive-tls-ca no longer deletes a ca-key.pem an earlier generation left:
nothing reads it, and leaving it means a rollback finds the old key instead
of minting a new anchor. Deleting it moves to PR 3, beside dropping ca.pem
from the trust bundle.
hive-tls-resign now also re-issues when the leaf's public key differs from
the key file's. The leaf and key are moved into place by two renames, and an
interrupted pair left a certificate beside the wrong key that the validity
check accepted.
Refs #4588
swarm-controller.nix said the gateway leaf is signed by a hive CA generated
at runtime; lib/hive-ca-trust.nix said hive-tls-ca generates the CA and that
containers bind ca.pem, while the code binds trust-bundle.pem.
Refs #4588
Every hive gets its own store identity (CN
<deploy.bao.hiveLeafCommonNamePrefix>-<hive>) and its own role on the
existing pki mount (<deploy.bao.hiveLeafPkiRolePrefix>-<hive>), whose
allowed_domains is the hive's domain and *.<domain>. The policy grants
update on that one issue path. swarm-bao-hive-leaf-policy writes role,
policy and cert-auth role for every hive in swarm.hives; the store's host
mints its own hive's identity in glue-bao-tls.nix and a new glue file
points deploy.hive-controller.tls.baoHiveIdentity{Cert,Key}File at it.
Hives on other hosts place it by hand. swarm.nix reserves the composed CN.
hive-tls-ca no longer generates a hive CA or signs a leaf: caGenScript,
signLeafScript/signHiveLeaf and the adoption block are gone, ca-key.pem
is deleted where it exists, and the unit only assembles trust-bundle.pem.
The retired ca.pem/ca-previous.pem stay in the bundle so leaves they
signed keep verifying.
hive-tls-resign becomes the bao issuance: at boot, on deploy and from a
daily timer it re-issues when the leaf is missing, past half the role's
lifetime, missing a name, or not chained to the store's pki root. Nothing
orders the gateway after it, so a valid leaf on disk never waits on the
store; a failed renewal leaves the leaf in place. A missing identity
fails the unit naming both options, as does the root fetch on a hive
fronting no swarm name, which now presents this identity instead of the
reader cert.
caValidityDays and leafValidityDays are removed (both spellings), since
nothing reads them.
Refs #4588
An agent's queue credential could subscribe to every subject in the swarm
account, so any agent could read every other agent's terminal, turn state,
operator input and request replies. Agents are the least trusted clients
on the queue (mara's ruling on #4901), so their grants now carry a
subscribe allow-list:
- an agent's own credential (the harness and its subagent daemon):
`_INBOX.agent.<agent>.>` and `$SWARM.input.<agent>`
- the hive's shared agent client: `_INBOX.client.<client-id>.>`
Hive and swarm-controller grants are unchanged (no `sub` claim, so still
every subject).
The clients connect with the matching inbox prefix, so the replies they
rely on still arrive: the icon write's JetStream ack and the schedule
DIRECT.GET. `connect_with_token` takes the agent name and sets the prefix
itself; the hive-shared fallback uses the new
`connect_with_inbox_prefix`.
The harness no longer subscribes to its input subject when it fell back
to the hive's shared client: that identity names no agent, so it cannot
be granted one agent's input without all of them. It logs that and
skips, the same as the schedule reader on that path.
Refs #4901
