The forgejo entry in `swarm.otel.publishedScrapeTargets` was declared
under `deploy.forgejo.enable`, so it existed only in the forge host's
evaluation. Its two readers evaluate elsewhere: the collector renders
its prometheus jobs from its own host's list, and authelia registers
the collector client's audience from its own host's list. With the
forge, the collector and authelia on different hosts, the collector
had no forgejo job and authelia would have refused its token.
Declare the entry unconditionally in swarm-otel-service.nix, keyed on
`swarm.forge.domain`, which every host evaluates identically. A swarm
with no forge scrapes a name that answers nothing and shows a failing
job, the same trade the collector and grafana OIDC clients already make.
Single-host render is unchanged: the entry already existed there.
Part of #5205
An answer whose reason ran past 500 characters was rejected whole, so the
verdict was lost and the one error row turned the review into no_verdict.
The reason is cut to the cap, ending in an ellipsis; verdict and certainty
are kept.
deploy.swarm-ui.enable and swarm.ui.enable are declared again as
nullOr bool, default null, and do nothing. Setting either adds an eval
warning that swarm-ui now runs wherever swarm-controller runs.
Remove deploy.swarm-ui.enable. Every reader (the swarm-ui vhost, the
authelia operator rule for the swarm apex, hive-network's
anyServiceEnabled) now reads deploy.swarm-controller.enable, and the
controller's webhook public URL is gated on the swarm domain alone,
since the vhost it names exists wherever the daemon does.
Both spellings of the old switch (deploy.swarm-ui.enable and the
already-renamed swarm.ui.enable) become mkRemovedOptionModule entries,
so a host that still sets either fails evaluation with a message
naming the controller toggle instead of silently changing.
Ruling (mara, #3742): "swarm-ui always runs wherever controller runs".
Part of #3742
hive-c0re (`hive-<name>`), swarm-controller and swarm-review-classifier
read their queue client secret from the store once and held it as
`ClientSecret::Value` for the life of the process. After authelia
re-minted a secret and swarm-secret-publish stored the new one, every
later token mint presented the old value and was refused until the
daemon restarted.
`ClientSecret::Stored` replaces `Value`: a `StoredSecret` holds the
secret in memory with a caller-supplied read callback, so the crate
takes no store dependency. When the token endpoint answers 400 or 401,
`mint_token` (and its blocking sibling, used by the controller's OTLP
exporters) re-reads it and, if the store holds a different secret,
mints once more with it. One re-read runs at a time and is spawned so
it outlives a caller that gives up. A re-read that fails or finds the
refused value delays the next one, 5 s doubling to 5 min, so a secret
that stays wrong costs one store read per delay. Logs name the client
id and never the secret.
swarm-nats-auth's `oidc_secret` was the template; its re-read machinery
now sits on `StoredSecret`, so the tree has one copy. The responder
gains the same re-read backoff.
The controller keeps its `IDENTITY` OnceLock: it now holds a
`QueueConfig` whose secret is re-read, and the lazily built vcs-metrics
exporter reads the identity from it.
agent_renewal.rs's module doc said a re-minted agent queue secret only
reaches the agent at its next start; hive-agent reads the store on every
connection attempt after its first, so the doc now says that.
Part of #5017 (slice Q).
A classifier settings panel under the try-out form reads and saves the model,
effort and how many requested reviews run at once through the settings route.
A save replaces all three; a refused one shows the route's reason and leaves
the form as typed. There is no API key field.
The hive reads the caps about every 30 seconds and a running agent takes a
changed cap at its next spawn or rebuild, so the dialog and the ui doc no
longer say the hive applies a change within seconds.
A resource caps row in the agent details reads GET /api/agents/{name}/limits
and shows the cpu quota and memory max, each reading as the hive deciding
when the swarm sets none. An edit dialog PUTs the filled fields, which
replaces the stored value whole, and a clear action DELETEs it. A refusal,
such as a percentage with a leading zero, shows as the route's reason under
the fields and leaves them as typed.
swarm-logs reads `swarm/agents/<agent>/queue` from the swarm secret
store with the agent's own store certificate (the read hive-agent makes
for its queue connection) and presents it as
`Bearer swarm-agent.<agent>.<secret>`, which the gateway's
swarm-logs-auth checks. On a 401 it reads the secret again and retries
once, so a secret re-minted between the read and the check does not
fail the query.
The OIDC mint against the hive's shared `hive-<h>-agent` client is gone
from swarm-logs, along with the unused `HIVE_AGENT_OIDC_CA_FILE` anchor.
logs.nix now gates on the store address instead of the queue's token
endpoint and wraps the binary with the paths queue-identity.nix gives
the harness; the host forwards the query URL wherever it forwards a
store identity.
The shared client is still delivered into containers; removing that is
Part of #4459.
The metrics vhost's `/` proxied every path to VictoriaMetrics with no
auth_request, so anything that could reach metrics.<swarm> could write
(`/api/v1/import`, `/api/v1/write`, ...) and delete
(`/api/v1/admin/tsdb/delete_series`) series. Only the OTLP push route
was gated.
`/` now answers 403. The read routes Grafana's Prometheus datasource
and vmui use are forwarded by exact or `^~` prefix location, each with
the matched path as its proxy_pass URI. The bare domain, which the
swarm UI's Metrics quick link opens, redirects to vmui instead of the
store's index page. The OTLP push location is unchanged.
Closes#5186
A reconcile projected only the definitions this build decodes, so after
a rollback an agent's already-projected schedule whose definition a newer
build rewrote was dropped from its key within a minute and stopped
firing. The projection now keeps an agent's stored entries whose id
belongs to an unreadable definition, as they were; it never adds one to
a key that did not hold it. A deleted readable definition still leaves
every key.
After a rollback, a record a newer build wrote (a new enum variant, a
changed required field) stopped decoding, and the strict
`schedules::read` turned that into an error on every read and write of
the key until someone deleted it by hand.
- agent_limits / inference (one document per agent): an undecodable
document reads as unset, with a WARN naming the bucket, key and error.
The PUT's "equal to stored, skip the write" shortcut no longer applies
to an undecodable document, so a PUT of the defaults replaces it too.
- schedule definitions (one document, every schedule): salvaged per
definition, as the review-classifier run list is. An undecodable
definition is kept as its raw JSON, hidden from the list, edits and
projections, written back by every commit after the readable ones, and
its id is never minted again. A document with no list of schedules
stays an error: reading it as empty would empty every agent's key.
- per-agent agent-schedules: an undecodable key reads as no schedules
and is rewritten on the next projection, even when the agent has none.
`schedules::read` is replaced by `read_or_default`; `wanted` keeps its
own strict read.
Closes#5193
A run record this build couldn't decode was dropped from the list it
read, and the next recorded run wrote the list back without it, so a
rollback followed by a roll-forward lost the newer build's runs for
good. The stored list is now a list of entries, each a decoded run or
the raw JSON of one that didn't decode. The route still shows only the
decoded runs. An undecodable entry keeps its place, counts toward the
100, and is written back as it was read. A read that finds any logs one
WARN with their count and the first error.
The settings decode derived its known fields from what
`Settings::default()` serializes, so a later field skipped when unset
would have been stripped from a valid stored document and lost on the
next PUT. The known fields are now an explicit list. A test serializes
a fully populated `Settings`, checks that its keys match the list, and
checks that `decode` round-trips it.
The controller keeps the classifier's newest runs as one JSON array and
its settings as one JSON object, each under one KV key. A document this
build could not decode, as after a rollback past a build that added an
outcome or a settings field, failed every read and every write until
someone deleted the key by hand. A classifier newer than its controller
refused every run request for the missing `model`.
The run store now decodes the array one record at a time: a record that
does not decode is dropped with a WARN naming the bucket, key, index and
error, and a document that is not an array reads as no runs. Listing
keeps working, and the next recorded run writes back only the records
that decoded.
The stored settings ignore a field this build does not know; one that
still does not decode reads as the defaults with a WARN. The PUT body
keeps `deny_unknown_fields`. A PUT now always writes, so a PUT of the
defaults also replaces an undecodable document.
A run request without `model` runs on haiku, the swarm-wide setting's
default, now one constant in swarm-queue-client.
`schedules::read` gains a sibling, `read_with`, taking the decoder.
Closes#5162
The metrics datasource defaulted to http://127.0.0.1:<port>, which only
reached the store when Grafana and VictoriaMetrics ran on the same host.
Swarm-tier services may not assume colocation (#4499), so the default is
now https://<swarm.victoriametrics.domain>, the gateway vhost the store's
host already serves. That vhost's query routes carry no auth_request, and
the Grafana container already trusts the hive CA for its authelia token
exchange, so no credential is added.
The logs datasource stays on loopback: the log store's query route needs
a bearer token Grafana does not hold yet.
Part of #3742 (item 4, metrics).
`swarmctl agent create` declares an agent the swarm has no declaration
for as paused, so ruth needs setting `up` from her card after step 4.
Restores the warning to re-create agents before a hive-side change makes
a container require a store identity.
Re-creating an agent mints its store identity the same way, so the
backfill verb and the `POST /api/agents/{name}/identity` route that only
it called go. The `MintAgentIdentity` job node stays: agent creation and
the renewal pass still queue it.
Part of #4765 (c).
The poller read `<state>/github-token` once at start, so after a PAT
rotation it kept polling with the revoked token until the unit
restarted. It now re-reads the file on every tick, as
`hive-forge-notify` does: a different non-empty value rebuilds the
GitHub source, clears the own-login cache, and logs one info line. A
missing or empty file keeps the token in use.
A 401 from the notifications endpoint is now logged at warn, once per
token value; other non-2xx statuses stay at debug.
Part of #5017 (slice G).
The classifier ran every classification on a hard-coded `haiku` with no
`--effort`, and the controller ran at most two requested reviews at once,
also hard-coded, so changing any of them took a code change and a
redeploy.
swarm-controller now keeps one settings document,
`{model, effort, max_concurrent_reviews}`, in its own
`review-classifier-settings` KV bucket under `all`, the way it keeps the
schedule definitions. No document means today's values: haiku, no
`--effort`, two reviews. `GET /api/review-classifier/settings` reads it;
`PUT` replaces it whole, needs the gateway's `Remote-User` like the
try-out POST, and refuses a bad model (the inference route's check), an
effort outside the five levels or a limit outside 1..=8 with
problem+json 400.
Every run request (try-out and requested review) now carries the model
and effort, and the classifier passes them to claude instead of its
constant, which is gone. A try-out reads the settings when it is posted;
a review reads them for the limit before it waits for a place and again
for the model and effort once it has one. The review semaphore is
replaced by a running count under a resizable limit, so a PUT, or the
next review's read, changes how many run without a restart, and a lower
limit lets the runs already going finish. MAX_WAITING_REVIEWS is
unchanged.
Closes#5151, part of #5096.
Seven host oneshots fetch a secret from the swarm secret store into a file
their consumer loads at start: swarm-bao-grafana-oidc, swarm-bao-otel-oidc,
swarm-bao-matrix-oidc, swarm-bao-ci-runner, swarm-bao-forge-oidc,
swarm-bao-hive-otel-oidc and swarm-bao-forwarder-oidc. Each was
RemainAfterExit with no timer, so it ran at boot or deploy and never again:
a secret re-minted in the store reached its consumer only through an
operator restarting the fetch.
lib/store-refresh-timer.nix gives each one a timer (OnUnitInactiveSec 10min,
RandomizedDelaySec 1min, the agent's own store re-read interval), and each
drops RemainAfterExit so a timer start is not a no-op. Each script already
writes the file only when secret_differs, and refresh_consumer/refresh_unit
restart the consumer only when the file is newer than its last start, so a
run reading an unchanged value restarts nothing.
Two docs said these units do not run on a timer; credentials.md's
ci-runner row said the runner token is not re-pulled.
Part of #5017 (slice T).
One card per run, newest first, from GET /api/review-classifier/runs: repo,
PR, head commit, trigger, when, how long, how many classifications and the
outcome as a badge. A card opens to the try-out's result table, the overall
verdict, the reason and the posted review's link. TryOutResult takes the
answer it shows rather than a whole try-out result, and its styles move to
their own file.
Every run is recorded when it ends: a try-out when its reply settles it,
a requested review once its review is posted or the post fails, and a
request turned away by a full queue once its comment is posted. A
duplicate request that starts nothing is not recorded. The newest 100
are one JSON array under `recent` in a new controller-owned KV bucket,
`review-classifier-runs`, written with compare-and-set as
`schedule-definitions` is (five attempts). A failed write is logged; the
review is already posted by then.
Each recorded run is also one info event, "review classifier run
finished", with the record's fields as tracing fields. The controller
logs natively to the journal, so they reach VictoriaLogs as F_<NAME>.
GET /api/review-classifier/runs returns the list, newest first, gated
by the gateway like the try-out GET. post_classifier_review now returns
the posted review's html_url, which the record keeps as review_url.
Closes#5153, part of #5096.
The store host's `swarm-bao-pki` now also signs, for every hive in
`swarm.hives` other than its own, the reader (`<hive>`), queue-agent
(`<queueAgentCommonNamePrefix>-<hive>`) and gateway-leaf
(`<hiveLeafCommonNamePrefix>-<hive>`) leaves, into
/var/lib/swarm-bao-pki/hives/<hive>/ with the basenames the own hive's
leaves use. Same CA, same `signLeaf`, idempotent on absence like every
other leaf in the unit. `signLeaf` now takes the CA from the top of the
PKI directory rather than from the leaf's directory; every existing
caller passed that directory, so their output is unchanged.
The operator still copies the files to the other hive's host and names
them in config; only the openssl step against the CA goes away
(mara on #5016, c95685: "ok mint").
Closes#5016
The row moves from the per-agent page into @hive/shared so both pages mount
the same one. The terminal's debug rows now follow the preference as it
changes, so rows already on screen hide or show at once instead of only the
rows that arrive after the toggle.
Every 30 seconds `workers::swarm_limits` reads the `agent-limits` key of
each agent this hive has and stores the result in
swarm-resource-limits.json, where the drop-in, the heap ceiling and the
dashboard read it. A cap therefore follows its agent to whichever hive
runs it.
Each value goes through the hive's own validate_cpu_quota /
validate_memory_max before it is stored, since hive-priv renders it
verbatim into the container's drop-in, and one bad value refuses the whole
set (argus on #4268, carried over from the wanted-state consumer this
replaces). A failed read, or a bucket that does not answer, leaves the
stored caps as they are; three failures in a row raise a banner.
swarm-nats-auth grants every hive `$JS.API.DIRECT.GET.KV_agent-limits.>`:
read-only, and every agent's key, not just the hive's own. Scoping it to
the hive's agents would need a roster in the auth responder, which
policy.rs argues against. mara chose this on #4268 (c95293); narrowing it
is a possible low-priority follow-up, not planned. A test pins that the
grant reads every key, writes none, and reaches no other bucket.
Contributes to #3865.
Two read-only routes feed them: GET /api/pulls/repos lists the repos with an
open pull request, and GET /api/pulls?repo=owner/name lists a repo's open
pull requests, highest number first. The page offers the lists through the
browser's own suggestion list and keeps both fields free text, since a run
also works on a merged or closed PR.
Follow-ups from the review of #5142.
A `Done` answer with fewer or more rows than the classifications sent, or
none, now posts the no-verdict comment instead of the classifier's overall
verdict, so a short answer can't approve.
Requests are accepted per repo, PR and head into a set bounded at the two
running plus eight waiting. A request for a key already running or waiting
starts nothing and logs at info; a request with every place taken starts no
run and posts a no-verdict comment saying so. Before, every delivery spawned
a task waiting on the semaphore, so toggling the review request queued one
paid run per toggle.
Table cells get a zero-width space after `#`, `!`, `://` and `www.`, so a
model's reason can't render an issue or PR reference or a bare URL as a link.
The secret publisher's policy denies the classifier's forge token leaf, the
way #5139 denied Grafana's admin password, with a module-eval-bao-grants arm
pinning it. The controller posts reviews with whatever token is there, so a
publisher write picked the account reviews come from.
Closes#5143, part of #5096.
The docs tell the operator to write
`secret/swarm/services/review-classifier/anthropic-api-key` by hand in
the bao UI, but the UI's OIDC login for authelia's `admins` group lands
on `swarm-operator-viewer`, which is list+read on `secret/metadata/*`
and nothing under `secret/data/`. bao refuses the write, so an admin
can't set the key and every classifier run fails with "no API key".
The viewer policy gains `create` and `update` on that one leaf, no
`read`: a UI session still never sees a secret value. The leaf is a
named binding, shared with the classifier's reader policy.
module-eval pins the viewer's two stanzas and that no `data/` grant
carries `read`. docs/swarm/secrets.md and services.md describe the
write.
Closes#5148
Requesting the forge account `review-classifier` as a reviewer now runs the
repo's rules against the PR and posts the result as that account's review,
on the head commit the run read. A push starts no run; only a fresh review
request does.
- An instance-wide `pull_request_review_request` system hook delivers to
`/webhook/forge/review-request`. A request for any other reviewer, or a
removed request, does nothing.
- The controller reads the PR, loads the rules with the same reader as
`GET /api/review-classifier/rules`, sends one request on the try-out
subject, and posts APPROVED or REQUEST_CHANGES with the table as the body.
- With no clean verdict (PR or rules don't load, the run fails, or any
classification has no answer) it posts a COMMENT saying why, never an
approval. The event is one function, `no_clean_verdict_event`.
- Table cells are flattened, markup-escaped, and every `@` gets a
zero-width space, so a model's reason can't break the table or mention
anyone.
- At most two requested reviews run at once; the rest wait in memory.
- The account is minted the way hive accounts are: a five-minute pass
queues a `MintClassifierForgeToken` node when the token at
`swarm/services/review-classifier/forge/token` is missing or stale. The
token is `write:repository`. The controller's bao policy gains that leaf
(create/read/update), pinned in module-eval bao-grants. The classifier
never sees the token.
The account gets no repo access automatically; a repo admin adds it by
hand. A re-request retires the account's earlier review: Forgejo clears
`official` on a reviewer's earlier reviews when it is requested again
(models/issues/review.go AddReviewRequest, v16.0.5), and approvals and
rejection blocks count official reviews only.
Refs #5137
A plain kv delete keeps the path's metadata, so the unit's create-only
write (-cas=0) is refused and the old password stays in force. Say
metadata delete, name who can run it, and point at the xkey section.
The table is re-aligned for the wider cell.
docs/swarm/sso.md still said Grafana ships admin/admin and that a dead
provider locks out the built-in admin. The password is minted into the
store and the API still takes basic auth for it, so the paragraph now says
where an operator reads it in an emergency. secrets.md says how to rotate
the password and to deploy the store's host first, and no longer calls SSO
the only way in.
The secret publisher's `services/*` write covered the admin-password
leaf, so a file-copier could set the password Grafana applies at its next
start. The leaf gets the same exact-path deny as the callout seeds, with
an arm in module-eval-bao-grants.
Grafana's built-in admin kept the nixpkgs default password `admin`, and
Grafana's API takes basic auth whatever `auth.disable_login_form` says, so
the public vhost gave server-admin to `admin:admin`.
`swarm-bao-grafana-admin` creates a random password in the store under
Grafana's existing leaf when none is stored (`create` without `update`, so
the first one is kept), then copies it into the container.
`security.admin_password` reads it for a new database, and a `grafana cli
admin reset-admin-password` in `grafana.service`'s `preStart` applies it to
an existing one on every start.
Closes#5138
A button beside the repo field reads the repo's rules from its default branch into the classification rows, names the file and the commit it read, asks before replacing rows the operator wrote, and shows the route's error without touching the rows.
forgejo-api escapes the whole file path of a raw-file request, so the
rules file went out as `raw/.hyperhive%2Freview-classifier.yml` and
reached the forge only if every proxy and router in between decoded the
`%2F`. The controller now sends that one request itself: `raw_file_url`
escapes each path segment on its own and joins them with `/`, and
`forge::Client` holds a second HTTP client with the same token for it.
A 404 from the default-branch lookup now means "no commit on the
default branch", like an empty repo, instead of falling through to the
route's "no repo" answer. Only the repo lookup's 404 still means the
repo doesn't exist.
Tests cover the URL shape, the reads against a loopback stub forge
that serves only the literal path, the branch 404, 503 with no forge
access, 503 at the forge deadline on a paused clock, and a bad
polarity value.
Part of #5096.
`GET /api/review-classifier/rules?repo=owner/name` reads
`.hyperhive/review-classifier.yml` or `.json` from the repo's default
branch with the controller's forge token, on every request, and answers
the classifications in the try-out POST's shape, plus the file, the
branch and the commit it was read at. The swarm UI's try-out page loads
them into its editor (#5134).
The file is one `classifications` list of the try-out's `Classification`.
A missing file, both files, a parse error, any unknown key, an empty list
or more than ten entries is a problem+json error, never a pass. The
checks the POST makes on its classifications move into one function both
paths call.
The doc names the file and its schema, replacing the placeholders, and
documents the route.
Part of #5096.
The repo check takes the endpoint's own character set and refuses . and .. parts. The running and expired messages say a run can last up to half an hour and that a controller restart drops the result.
Two classifications sharing a name made the result table's row key collide, so the form now refuses duplicate names and the table keys rows by position anyway. The page said it stores nothing in the browser, but the result table remembers its column filters like every table does; the header comment and the docs now say that. The row cap's comment says to keep it in step with the endpoint's own cap.
A page to try a review classification against a real PR: repo, PR number and one or more classifications (name, description, polarity, threshold). Run posts to the controller's try-out endpoint and polls until the run is done or failed, saying it is running meanwhile, then shows the review's table, the overall verdict and the head commit. A row that could not run shows its error in place of a reason, and a failed run shows its error. The inputs stay so the run can be edited and repeated. Nothing is stored and nothing is posted to the forge. Route, nav entry and a section in docs/swarm/ui.md.
deploy.review-classifier.enable now defaults to allSwarmServices, as the
other shared services do, but only where the host has the classifier's
store identity (deploy.bao.reviewClassifierClient{Cert,Key}File). The
classifier module asserts that pair; glue-bao-tls.nix mints it only on the
host that runs the store, so a services host with the store placed
elsewhere would otherwise fail eval. An explicit value still wins.
The operator still writes the Anthropic key by hand; until then each run
fails with "no API key…" while the service runs.
- review-classifier.md: claude runs spawn through hive-claude directly
with no tools and no session (hive-runtime holds only TurnStop); the
answer's fields, the 500-character reason cap and what a failure does;
how the try-out page reaches the classifier; the settled parts of the
open list (API key path, try-out subject, --tools "" on claude).
The banner stays.
- services.md: a Review classifier section with the two operator steps.
- secrets.md, credentials.md: the classifier's leaf and the key row.
- network.md: the container's row. CLAUDE.md: the crate.
Agents reach the operator over matrix now (#5115). A `send` to
`operator` is refused, by the broker and by the MCP allow-list check,
with an error that names the matrix MCP tools. The dashboard's Y3R C4LL
tab goes with it: the operator inbox, `GET /api/operator-inbox`,
`Broker::unread_for_recipient`, and the browser notifications that only
ever fired on operator-bound messages.
The harness no longer posts turn failures and plugin-install failures
to the operator inbox. Both are already logged at warn; a new Grafana
rule, `hh-agent-turn-failed`, fires per agent on the harness's
`turn failed` line.
Dashboard-to-agent messaging (op-send, the agent web UI's message box,
mark-all-read for agent inboxes) is unchanged.
Decisions per mara on #5115: q1 a, q2 a plus a grafana alert, q3 keep
dashboard-to-agent messaging and leave swarm-level code alone.
`swarmctl --swarm https://<swarm> login` runs the OAuth 2.0
authorization-code flow with PKCE against the swarm's authelia as a new
public `swarmctl` client: a pushed authorization request, the browser login
and explicit consent, and the code delivered by form_post to a loopback
port. The access and refresh tokens are cached at mode 0600 under
$XDG_STATE_HOME/swarmctl/ and refreshed under a file lock, since authelia
rotates the refresh token and revokes the login when a used one is
presented again. With --swarm (or SWARMCTL_SWARM), the agent, schedule and
forge verbs send their requests to https://<swarm>/api/ with the bearer
token instead of over the controller's unix socket, which stays the default.
authelia registers the client on every authelia host with a swarm domain:
`kind = "native"`, public, no minted secret, scopes offline_access and
authelia.bearer.authz, audience https://<swarm>/api/ (matched as a URL
prefix), redirect http://127.0.0.1/callback (any loopback port). Every
field is one authelia 4.39.20's validator requires for a public client
holding the bearer scope.
The swarm apex's /api/ answers a refused caller that sent an
Authorization header with the 401 itself instead of the login redirect,
so the CLI can tell "log in again" apart from an answer; a browser still
gets the redirect. The bearer token is not forwarded to the controller.
Refs #4409 (mara: c94764, c94782).
The details open under the agent badge without dimming or blocking the page; a click outside or Escape closes it. New ui/popover primitive (anchored, portal, no backdrop) with a sample on the components page. A confirm or link dialog opened from inside it stays modal, and the popover ignores clicks and Escape that belong to that dialog. AgentDetailDialog becomes AgentDetailPopover.
The terminal page gets an agent badge (icon and name) that opens the agent's detail panel in a dialog over the terminal, without the terminal preview. The panel body and the actions on an agent (declare a wanted state, link an account, with their confirm and form dialogs) move out of the agent roster page into AgentDetail and useAgentActions, so the roster and the dialog share them. AgentIcon moves to its own file for the same reason.
The agent terminal page swaps the page's favicon for the agent's icon while it is mounted, so tabs of different agents tell apart. A subagent terminal shows its agent's icon. An agent with no icon, or an unreachable controller, keeps the hyperhive mark; leaving the page restores the page's own icon.
A replay consumer now has a 5s idle heartbeat, and the row stream ends at
the first consumer error instead of skipping it. When the server drops the
consumer, as on a restart, two missed heartbeats end the SSE response and
the browser reconnects with Last-Event-ID. Before, the response stayed
open and delivered nothing.
A Last-Event-ID above the stream's newest sequence now replays as a fresh
reader. The server accepts a start past the end and delivers nothing
until the stream reaches it, so a stale id stalled the replay.
swarm-controller's stream tests run against a real nats-server on
loopback (`test_nats`, binary from HIVE_NATS_SERVER, exported by
checks.nix and devshell.nix). They cover: ensuring the stream twice, an
existing stream with other limits being opened as it is, the replay
arriving before live rows, a reconnect getting every later row exactly
once, and a dropped consumer ending the row stream.
The limits test now compares against the subagent stream's own config.
Two comments that described the agent's terminal route as live-only are
corrected.
