remove redundant infos

README.md

@@ -5,9 +5,6 @@ Display" or "Airport Display".
 
 This crate contains C# bindings for the [servicepoint](https://git.berlin.ccc.de/servicepoint/servicepoint) library based on [servicepoint-binding-uniffi](https://git.berlin.ccc.de/servicepoint/servicepoint-binding-uniffi).
 
-Also take a look at the main project [README](https://git.berlin.ccc.de/servicepoint/servicepoint/src/branch/main/README.md) for more
-information.
-
 F# is not tested. If there are usability or functionality problems, please open an issue.
 
 ## Note on stability
@@ -82,3 +79,9 @@ Because of that, there is no NuGet package you can use directly.
 Run `./generate-binding.sh` to regenerate the base library. 
 The generated source file is checked in.
 The CI enforces that generated bindings do not change.
+
+## Everything else
+
+Look at the main project [README](https://git.berlin.ccc.de/servicepoint/servicepoint/src/branch/main/README.md) for
+further information.
+

about_display.md

@@ -1,41 +0,0 @@
-# About the display
-
-- Resolution: 352x160=56,320 pixels
-- Pixels are grouped into 44x20=880 tiles (8x8=64 pixels each)
-- Smallest addressable unit: row of pixels inside of a tile (8 pixels = 1 byte)
-- The brightness can only be set per tile
-- Screen content can be changed using a simple UDP protocol
-- Between each row of tiles, there is a gap of around 4 pixels size. This gap changes the aspect ratio of the display.
-
-### Binary format
-
-A UDP package sent to the display has a header size of 10 bytes.
-Each header value has a size of two bytes (unsigned 16 bit integer).
-Depending on the command, there can be a payload following the header.
-
-To change screen contents, these commands are the most relevant:
-
-1. Clear screen
-    - command: `0x0002`
-    - (rest does not matter)
-2. Send CP437 data: render specified text into rectangular region
-    - command: `0x0003`
-    - top left tile x
-    - top left tile y
-    - width in tiles
-    - height in tiles
-    - payload: (width in tiles * height in tiles) bytes
-        - 1 byte = 1 character
-        - each character is rendered into one tile (mono-spaced)
-        - characters are encoded using code page 437
-3. Send bitmap window: set pixel states for a rectangular region
-    - command: `0x0013`
-    - top left tile x
-    - top left _pixel_ y
-    - width in tiles
-    - height in _pixels_
-    - payload: (width in tiles * height in pixels) bytes
-        - network byte order
-        - 1 bit = 1 pixel
-
-There are other commands implemented as well, e.g. for changing the brightness.

rustfmt.toml

@@ -1 +0,0 @@
-max_width = 80

uniffi-bindgen-cs/Cargo.toml

@@ -1,11 +1,8 @@
 [package]
 name = "uniffi-bindgen-cs"
-version = "0.13.1"
 publish = false
 edition = "2021"
 license = "GPL-3.0-or-later"
-#readme = "README.md"
-keywords = ["cccb", "cccb-servicepoint", "uniffi"]
 
 [dependencies.uniffi-bindgen-cs]
 git = "https://github.com/NordSecurity/uniffi-bindgen-cs"