9c09653603
`usersFile`, `hostClientSecretDir` and `hostUsersFile` are filesystem paths that only exist on the machine running the `swarm-authelia` container. A hive that does not run it has nothing at any of them, so they fail the swarm-wide test the namespace's header states. `usersFile` is a path *inside* the container and still belongs on the deploy side: a path's scope is the scope of the filesystem it names, and that filesystem is this host's container root. The two `host*` options are `readOnly` and derived, so nothing can set them through the rename shims — those serve readers. The shims are still required: `mkRenamedOptionModule` is what keeps an out-of-tree module reading the old path resolving at all. Seven reads went through an alias rather than a full path (`autheliaCfg.hostClientSecretDir` in five modules, `.hostUsersFile` in a sixth, `swarmCfg.authelia.hostClientSecretDir` in a seventh). Every one of those files already binds `deployCfg`, so the repoint needed no new alias. Four more sites were prose, including one in `docs/`, which no grep restricted to `nix/` would have found.
482 lines
21 KiB
Nix
482 lines
21 KiB
Nix
# "What does THIS host deploy?"
|
|
#
|
|
# Separated from `services.hyperhive.swarm.*` because those are two
|
|
# different kinds of fact and only one of them varies per machine:
|
|
#
|
|
# swarm.* — swarm-wide truth. The swarm's name, domain, hives, peers,
|
|
# CA, and where each service lives. **Identical on every
|
|
# host**, byte for byte; a hive needs all of it to be a
|
|
# *client* of the swarm.
|
|
# deploy.* — this machine's deployment decisions. Necessarily different
|
|
# on every host, because that is what a deployment is.
|
|
#
|
|
# The `enable` toggles live here rather than under `swarm.*` so the
|
|
# namespace that is identical everywhere does not carry the one thing
|
|
# that must differ per host.
|
|
#
|
|
# Flat and named for the thing deployed — `deploy.forgejo`, not
|
|
# `deploy.swarmServices.forgejo`: grouping by "swarm service" re-encodes
|
|
# the service-side taxonomy into a layer that does not care about it.
|
|
#
|
|
# ⚠️ Each entry is an attrset with an `enable`, not a bare bool, so a
|
|
# service that grows a second *deployment* decision has somewhere to put
|
|
# it — `deploy.forgejo = { enable; ci; }` is then an ordinary addition
|
|
# rather than a migration. `ci` ("does this host run the runner too") is
|
|
# exactly that shape, and a bare bool leaves it unrepresentable.
|
|
#
|
|
# ⚠️ The renames below are deliberately in this one file rather than
|
|
# spread across the service modules, so the whole move has a single home
|
|
# and a single file to delete when the deprecation window closes — the
|
|
# shape ./swarm-peers-removed.nix already uses.
|
|
{ lib, config, ... }:
|
|
let
|
|
deployCfg = config.services.hyperhive.deploy;
|
|
in
|
|
{
|
|
imports = [
|
|
# Same type, same meaning, new path — so a rename carries it exactly
|
|
# and existing configs keep evaluating with one warning naming both
|
|
# paths. Precedent: ./hive-forge/default.nix, ./hive-matrix.nix.
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "grafana" "enable" ]
|
|
[ "services" "hyperhive" "deploy" "grafana" "enable" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "grafana" "socketDir" ]
|
|
[ "services" "hyperhive" "deploy" "grafana" "socketDir" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "grafana" "datasourceUrl" ]
|
|
[ "services" "hyperhive" "deploy" "grafana" "datasourceUrl" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "grafana" "logsDatasourceUrl" ]
|
|
[ "services" "hyperhive" "deploy" "grafana" "logsDatasourceUrl" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "grafana" "plugins" ]
|
|
[ "services" "hyperhive" "deploy" "grafana" "plugins" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "victoriametrics" "enable" ]
|
|
[ "services" "hyperhive" "deploy" "victoriametrics" "enable" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "victorialogs" "enable" ]
|
|
[ "services" "hyperhive" "deploy" "victorialogs" "enable" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "controller" "enable" ]
|
|
[ "services" "hyperhive" "deploy" "swarm-controller" "enable" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "controller" "socketPath" ]
|
|
[ "services" "hyperhive" "deploy" "swarm-controller" "socketPath" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "controller" "forgeTokenFile" ]
|
|
[ "services" "hyperhive" "deploy" "swarm-controller" "forgeTokenFile" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "controller" "authBridgeUrl" ]
|
|
[ "services" "hyperhive" "deploy" "swarm-controller" "authBridgeUrl" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "controller" "queue" "clientSecretFile" ]
|
|
[ "services" "hyperhive" "deploy" "swarm-controller" "queue" "clientSecretFile" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "ui" "enable" ]
|
|
[ "services" "hyperhive" "deploy" "swarm-ui" "enable" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "authelia" "enable" ]
|
|
[ "services" "hyperhive" "deploy" "authelia" "enable" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "authelia" "usersFile" ]
|
|
[ "services" "hyperhive" "deploy" "authelia" "usersFile" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "authelia" "hostClientSecretDir" ]
|
|
[ "services" "hyperhive" "deploy" "authelia" "hostClientSecretDir" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "authelia" "hostUsersFile" ]
|
|
[ "services" "hyperhive" "deploy" "authelia" "hostUsersFile" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "nats" "enable" ]
|
|
[ "services" "hyperhive" "deploy" "nats" "enable" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "otel" "enable" ]
|
|
[ "services" "hyperhive" "deploy" "swarm-otel" "enable" ]
|
|
)
|
|
|
|
# The CI runner, and the only entry here that renames more than an
|
|
# `enable`: every knob under it describes the runner THIS host would run,
|
|
# so leaving `name`/`concurrency`/`labels`/`package` in the namespace that
|
|
# must be identical swarm-wide would keep the original defect for four
|
|
# more options. Renamed one by one because `ci` is a plain attrset of
|
|
# options rather than a submodule type, so there is no parent path to
|
|
# rename in a single entry.
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "forge" "ci" "enable" ]
|
|
[ "services" "hyperhive" "deploy" "forgejo" "ci" "enable" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "forge" "ci" "name" ]
|
|
[ "services" "hyperhive" "deploy" "forgejo" "ci" "name" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "forge" "ci" "concurrency" ]
|
|
[ "services" "hyperhive" "deploy" "forgejo" "ci" "concurrency" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "forge" "ci" "labels" ]
|
|
[ "services" "hyperhive" "deploy" "forgejo" "ci" "labels" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "forge" "ci" "package" ]
|
|
[ "services" "hyperhive" "deploy" "forgejo" "ci" "package" ]
|
|
)
|
|
|
|
# The queue's callout identity. What stays under `swarm.nats` is what the
|
|
# queue IS to every hive — the ports it answers on, the client id it is
|
|
# registered under, the responder package; these five are what the host
|
|
# running it decides.
|
|
#
|
|
# ⚠️ The two PUBLIC keys move with their seeds. A public key looks
|
|
# swarm-wide, and the user key genuinely is published to every client that
|
|
# connects — but peers RECEIVE it over the wire, they never configure it,
|
|
# and splitting a keypair across two namespaces is worse than either
|
|
# placement. `enable` moved earlier; its shim is the one above.
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "nats" "autoGenerateCallout" ]
|
|
[ "services" "hyperhive" "deploy" "nats" "autoGenerateCallout" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "nats" "calloutUserPublicKey" ]
|
|
[ "services" "hyperhive" "deploy" "nats" "calloutUserPublicKey" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "nats" "calloutIssuerPublicKey" ]
|
|
[ "services" "hyperhive" "deploy" "nats" "calloutIssuerPublicKey" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "nats" "calloutUserSeedFile" ]
|
|
[ "services" "hyperhive" "deploy" "nats" "calloutUserSeedFile" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "nats" "calloutIssuerSeedFile" ]
|
|
[ "services" "hyperhive" "deploy" "nats" "calloutIssuerSeedFile" ]
|
|
)
|
|
|
|
# The rest of the forge split. What stays under `swarm.forge` is what the
|
|
# forge IS from any hive's point of view — its package, the names and ports
|
|
# it answers on, the URLs it advertises, the client id it is registered
|
|
# under; these five are what the host running it decides. `sso` splits
|
|
# because its two halves are different facts: the client id must match the
|
|
# entry in authelia's register, the secret is a path on this machine.
|
|
#
|
|
# `mirrors` renames in one entry rather than one per field: it is a single
|
|
# option of a list-of-submodule type, so the rename carries its whole
|
|
# value. The `ci` block above needs five because it is a plain attrset of
|
|
# separate options, which is the case with no parent path to rename.
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "forge" "behindGateway" ]
|
|
[ "services" "hyperhive" "deploy" "forgejo" "behindGateway" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "forge" "openFirewall" ]
|
|
[ "services" "hyperhive" "deploy" "forgejo" "openFirewall" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "forge" "mirrors" ]
|
|
[ "services" "hyperhive" "deploy" "forgejo" "mirrors" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "forge" "sso" "clientSecretFile" ]
|
|
[ "services" "hyperhive" "deploy" "forgejo" "sso" "clientSecretFile" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "forge" "hostSwarmControllerTokenFile" ]
|
|
[ "services" "hyperhive" "deploy" "forgejo" "hostSwarmControllerTokenFile" ]
|
|
)
|
|
|
|
# The homeserver, split the same way. `swarm.matrix` keeps what it IS to
|
|
# every hive — its package, the name it answers to, the ports and URLs it
|
|
# is reached on, the client id it is registered under. These six are what
|
|
# the host running it decides. ⚠️ `enable` is NOT here: it was renamed
|
|
# earlier and its shim lives in ./hive-matrix.nix, so that file is the one
|
|
# to check before assuming this table is the whole matrix story.
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "matrix" "openFirewall" ]
|
|
[ "services" "hyperhive" "deploy" "matrix" "openFirewall" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "matrix" "trustedServers" ]
|
|
[ "services" "hyperhive" "deploy" "matrix" "trustedServers" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "matrix" "maxRequestSize" ]
|
|
[ "services" "hyperhive" "deploy" "matrix" "maxRequestSize" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "matrix" "registrationTokenFile" ]
|
|
[ "services" "hyperhive" "deploy" "matrix" "registrationTokenFile" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "matrix" "gui" "enable" ]
|
|
[ "services" "hyperhive" "deploy" "matrix" "gui" "enable" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "matrix" "sso" "clientSecretFile" ]
|
|
[ "services" "hyperhive" "deploy" "matrix" "sso" "clientSecretFile" ]
|
|
)
|
|
|
|
# Retention is read only where the container is defined, so it is a
|
|
# decision of the host running the store rather than something the swarm
|
|
# agrees on. The two stores keep everything else — package, domain, port
|
|
# — in `swarm.*`, because a client hive needs those to reach them.
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "victoriametrics" "retentionPeriod" ]
|
|
[ "services" "hyperhive" "deploy" "victoriametrics" "retentionPeriod" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "victorialogs" "retentionPeriod" ]
|
|
[ "services" "hyperhive" "deploy" "victorialogs" "retentionPeriod" ]
|
|
)
|
|
|
|
# The switch over all of the above, and the name changes with the path
|
|
# because the old one described the wrong subject: those services are
|
|
# required of the SWARM, while the option says whether THIS host runs
|
|
# them. `allSwarmServices` is mara's own phrasing of what it means.
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "enableRequiredServices" ]
|
|
[ "services" "hyperhive" "deploy" "allSwarmServices" ]
|
|
)
|
|
|
|
# The mode above that one. It sat at the TOP of `services.hyperhive`,
|
|
# which is the same defect one tier up: that namespace is everything
|
|
# about hyperhive, not the settings of a single hive. The new name says
|
|
# what the mode asserts — the whole swarm runs on this host — instead of
|
|
# naming its mechanism.
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "enableAllLocalDefaults" ]
|
|
[ "services" "hyperhive" "deploy" "singleHostSwarm" ]
|
|
)
|
|
|
|
# The hive CA's own knobs. They sat at the TOP of `services.hyperhive`,
|
|
# which is meant to be everything about hyperhive rather than the settings
|
|
# of one hive — and where the CA lives, how long it lasts and how long its
|
|
# leaves last are decisions of the host that holds the key. `hive-controller`
|
|
# is hive-c0re's new name (mara, on the issue), so the daemon that owns the
|
|
# CA is what they hang off.
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "tls" "stateDir" ]
|
|
[ "services" "hyperhive" "deploy" "hive-controller" "tls" "stateDir" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "tls" "caValidityDays" ]
|
|
[ "services" "hyperhive" "deploy" "hive-controller" "tls" "caValidityDays" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "tls" "leafValidityDays" ]
|
|
[ "services" "hyperhive" "deploy" "hive-controller" "tls" "leafValidityDays" ]
|
|
)
|
|
|
|
# The WireGuard mesh, whole. Unlike every rename above this one moves a
|
|
# namespace rather than a toggle: nothing under it is a fact another hive
|
|
# reads. A peer needs this host's `wireguardEndpoint` — the roster entry
|
|
# in ./swarm.nix, which stays — and nothing about the interface this host
|
|
# brings up. `listenPort` moves for the same reason and is easy to read
|
|
# the other way: it is what this host *binds*, while the port a peer
|
|
# *dials* is the one inside `wireguardEndpoint`.
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "wireguard" "enable" ]
|
|
[ "services" "hyperhive" "deploy" "wireguard" "enable" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "wireguard" "privateKeyFile" ]
|
|
[ "services" "hyperhive" "deploy" "wireguard" "privateKeyFile" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "wireguard" "address" ]
|
|
[ "services" "hyperhive" "deploy" "wireguard" "address" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "wireguard" "listenPort" ]
|
|
[ "services" "hyperhive" "deploy" "wireguard" "listenPort" ]
|
|
)
|
|
(lib.mkRenamedOptionModule
|
|
[ "services" "hyperhive" "swarm" "wireguard" "persistentKeepalive" ]
|
|
[ "services" "hyperhive" "deploy" "wireguard" "persistentKeepalive" ]
|
|
)
|
|
];
|
|
|
|
# ⚠️ `deploy.forgejo` is declared in ./hive-ci.nix, not here, and it is the
|
|
# one entry with no `enable`: the forge is not optional — it is the canonical
|
|
# store for the meta flake and every agent's config repo, so it deploys with
|
|
# hyperhive itself. Running the CI runner is the only *deployment* decision
|
|
# it has, which is exactly the `{ enable; ci; }` shape the header describes,
|
|
# minus the half that does not apply. The knobs live with the module that
|
|
# reads them; this file stays the registry of toggles.
|
|
options.services.hyperhive.deploy = {
|
|
grafana.enable = lib.mkOption {
|
|
type = lib.types.bool;
|
|
default = false;
|
|
description = ''
|
|
Run the swarm's metrics UI on this host.
|
|
|
|
Off by default and not derived from
|
|
{option}`services.hyperhive.enable`: a swarm has one Grafana, so
|
|
running it is a decision about this host rather than about
|
|
whether hyperhive is installed.
|
|
'';
|
|
};
|
|
|
|
victoriametrics.enable = lib.mkOption {
|
|
type = lib.types.bool;
|
|
default = false;
|
|
description = ''
|
|
Run the swarm's metrics store on this host.
|
|
|
|
Paired with
|
|
{option}`services.hyperhive.deploy.grafana.enable`: a store
|
|
with no UI is unreadable and a UI with no store is empty, so there
|
|
is no sensible deployment that takes one and not the other from
|
|
that switch. Set either directly to run exactly one.
|
|
'';
|
|
};
|
|
|
|
victorialogs.enable = lib.mkOption {
|
|
type = lib.types.bool;
|
|
default = false;
|
|
description = ''
|
|
Run the swarm's log store on this host.
|
|
|
|
A hive that is not the service host is a *client* of this store,
|
|
not a second one.
|
|
'';
|
|
};
|
|
|
|
bao.enable = lib.mkOption {
|
|
type = lib.types.bool;
|
|
default = false;
|
|
example = true;
|
|
description = ''
|
|
Run the swarm's secret store in a `swarm-bao` container on this
|
|
host. A swarm has one store and it has to exist somewhere.
|
|
|
|
*Where* it runs is a separate question from *that* it runs: set
|
|
this directly to put the store on a host of its own, and clients
|
|
still reach it by name at
|
|
{option}`services.hyperhive.swarm.bao.domain` rather than at a
|
|
local address.
|
|
|
|
With it off, this hive is a *client*: it still reads its own
|
|
secrets from whoever runs the store, authenticating with its own
|
|
client certificate. Every hive needs the client half; only one
|
|
runs the server half, which is why the two live in different
|
|
namespaces.
|
|
'';
|
|
};
|
|
|
|
authelia.enable = lib.mkOption {
|
|
type = lib.types.bool;
|
|
default = false;
|
|
example = true;
|
|
description = ''
|
|
Run the swarm's authelia in a `swarm-authelia` container on this
|
|
host. A swarm has one SSO provider, and this says it lives here.
|
|
|
|
With it off, this hive is a *client*:
|
|
{option}`services.hyperhive.swarm.authelia.url` still points at
|
|
whoever runs it, and no container is created. That asymmetry is
|
|
why the two live in different namespaces — every hive needs the
|
|
client half, only one runs the server half.
|
|
'';
|
|
};
|
|
|
|
swarm-otel.enable = lib.mkOption {
|
|
type = lib.types.bool;
|
|
default = false;
|
|
description = ''
|
|
Run the **swarm's** telemetry collector on this host.
|
|
|
|
A swarm has one of these, and it belongs wherever the shared
|
|
services live rather than on every hive.
|
|
|
|
Named `swarm-otel` rather than `otel` because there are two
|
|
collectors and the tier is the whole distinction:
|
|
{option}`services.hyperhive.otel.enable` is the **hive-tier** one,
|
|
which every hive runs. A bare `deploy.otel` would not say which
|
|
it meant. A hive that does not run the swarm collector still runs
|
|
its own, and reaches this one by name at
|
|
{option}`services.hyperhive.swarm.otel.domain`.
|
|
'';
|
|
};
|
|
|
|
matrix.enable = lib.mkOption {
|
|
type = lib.types.bool;
|
|
default = false;
|
|
description = ''
|
|
Run the swarm's matrix homeserver — matrix-tuwunel, in a
|
|
`hive-matrix` container — on this host.
|
|
|
|
Set it directly to put the homeserver somewhere other than the
|
|
host holding the rest of the swarm's services.
|
|
|
|
Client-side settings stay in
|
|
{option}`services.hyperhive.swarm.matrix.*`, which every hive
|
|
agrees on; this is only the decision to run it here.
|
|
'';
|
|
};
|
|
|
|
nats.enable = lib.mkOption {
|
|
type = lib.types.bool;
|
|
default = false;
|
|
description = ''
|
|
Run the swarm's message queue in a `swarm-nats` container on this
|
|
host. A swarm has one queue, so at most one host turns this on —
|
|
but *which* host is its own decision, not necessarily the one
|
|
running the swarm's other shared services.
|
|
|
|
Off by default, and off means *absent*: no container is created
|
|
and nothing else in the evaluated config changes.
|
|
'';
|
|
};
|
|
|
|
swarm-controller.enable = lib.mkOption {
|
|
type = lib.types.bool;
|
|
default = false;
|
|
description = ''
|
|
Run the swarm-controller daemon on this host.
|
|
|
|
Off by default and deliberately not derived from
|
|
{option}`services.hyperhive.enable`: a swarm has one controller,
|
|
so running it is a decision about this host rather than about
|
|
whether hyperhive is installed.
|
|
'';
|
|
};
|
|
|
|
swarm-ui.enable = lib.mkOption {
|
|
type = lib.types.bool;
|
|
default = deployCfg.swarm-controller.enable;
|
|
defaultText = lib.literalExpression "services.hyperhive.deploy.swarm-controller.enable";
|
|
example = true;
|
|
description = ''
|
|
Serve the swarm UI from this host.
|
|
|
|
Derived from
|
|
{option}`services.hyperhive.deploy.swarm-controller.enable`: the
|
|
UI is a view onto the controller's state and reaches it over that
|
|
daemon's unix socket, so the host that runs the controller is the
|
|
host that can serve the UI. A hive that merely *uses* a swarm has
|
|
nothing to serve here.
|
|
'';
|
|
};
|
|
};
|
|
}
|