# Swarm UI

The swarm's own web surface and the operator's day-to-day view: served by
the gateway on the **swarm apex** (`services.hyperhive.swarm.domain`),
readable only by operators. The per-hive dashboard, on each hive's own
domain, covers host-level detail for one hive.

## What it shows

| route                                          | what                                                                                                |
| ---------------------------------------------- | --------------------------------------------------------------------------------------------------- |
| `/`                                            | the hive directory, each hive with its last reported status                                         |
| `/agents`                                      | every agent: status, config PR, wanted state; create agents, link forge, matrix and GitHub accounts |
| `/agents/<name>/terminal`                      | one agent's live terminal                                                                           |
| `/agents/<name>/subagents/<subagent>/terminal` | one of that agent's subagents' live terminal                                                        |
| `/jobs`                                        | the controller's job graph — where agent creation and credential mints show progress                |
| `/issues`                                      | a cross-repo issue report                                                                           |

Everything it shows comes from [`swarm-controller`](../../swarm-controller/README.md).
An agent created here or with `swarmctl agent create` starts `paused`; set it
`up` from its card.

### Agent and subagent terminals

An agent's detail panel on `/agents` shows a small live preview of its
terminal, and below it the agent's **subagents**: every subagent the swarm
queue holds terminal rows for from the last 24 hours. Picking one shows its
terminal in the same preview, and **expand** opens it in its own tab, as it
does for the agent. The list refreshes every 10 seconds, so a subagent the
agent spawns shows up once it writes output.

Both terminals are live views with no input box: a preview shows rows
published while it's open. Subagents take no input from the swarm. A subagent
terminal has no turn-state badges.

<details><summary>Where the subagent list and rows come from</summary>

The agent's subagent daemon publishes each subagent's terminal rows on
`$SWARM.term.<agent>.sub.<subagent>` with the agent's own queue credential,
into a stream named `term-sub-<agent>` that swarm-controller creates for every
declared agent. The stream keeps rows for 24 hours. swarm-controller serves the list as
`GET /api/agents/<name>/subagents`, the subagents named by the subjects in that
stream, and relays one subagent's rows as SSE on
`GET /api/agents/<name>/subagents/<subagent>/term/stream`. An agent with no
store identity, or no queue address, publishes no subagent terminals.

</details>

### Linking external accounts

Each agent on `/agents` opens three dialogs that write a credential for it
into the swarm secret store through swarm-controller. All three are blind
set actions: no route hands a token back. swarm-controller refuses to link a
name that already holds an account; delete that account first to replace it.

The agent's detail panel lists its linked accounts under **accounts**, one row
per account: kind, name and host. Opening an agent makes one request,
`GET /api/hives/{hive}/agents/{agent}/linked-accounts`, which returns every
account of that agent as names and hosts and never a credential.

| kind    | one row per                                 | name        | host                     |
| ------- | ------------------------------------------- | ----------- | ------------------------ |
| matrix  | `swarm/agents/<agent>/matrix/<account>`     | the account | its `homeserver`, if set |
| forgejo | `swarm/agents/<agent>/forge/<label>`        | the label   | its `url`                |
| github  | `swarm/agents/<agent>/github-token`, if any | `github`    | `github.com`             |

The matrix `main` row is the agent's own account, which the swarm mints;
it carries an **own account** badge. The panel requests the list again when
a link dialog closes.

- **link a matrix account** — `PUT /api/hives/{hive}/agents/{agent}/matrix-accounts/{account}`,
  either a pasted bearer token or a user id + password that
  swarm-controller logs in with, storing the token it gets back.
- **link a forge account** — `PUT /api/hives/{hive}/agents/{agent}/forge-accounts/{label}`
  with a forge URL and an access token, stored at
  `swarm/agents/<agent>/forge/<label>`. The agent's
  `hive-agent-forge-accounts` unit fetches it into
  `<state>/forge-<label>-token` and `<state>/forge-<label>.json`, the files
  `hive-forge -f <label>` reads. The unit rewrites a pair whenever the
  store's account for its label differs, and never deletes one: a pair whose
  label the store doesn't list stays untouched. swarm-controller answers 409
  to a link for a label that already holds an account, so replacing one
  takes a delete, then a new link.
- **link a github account** — `PUT /api/hives/{hive}/agents/{agent}/github-account`
  with a personal access token, stored at `swarm/agents/<agent>/github-token`.
  One token per agent. The agent's
  `hive-agent-github-token` unit fetches it into `<state>/github-token`,
  the file its `gh` wrapper, git credential helper and GitHub notification
  poller read. A `github-token` already in place stays when the store holds
  none. What the token needs and how the agent uses it:
  [GitHub accounts](../integrations/github.md).

#### Deleting a linked account

Every row except the matrix `main` row has a **delete** action. Its
confirmation names the account and its host, and confirming sends one
request:

| kind    | route                                                               |
| ------- | ------------------------------------------------------------------- |
| matrix  | `DELETE /api/hives/{hive}/agents/{agent}/matrix-accounts/{account}` |
| forgejo | `DELETE /api/hives/{hive}/agents/{agent}/forge-accounts/{label}`    |
| github  | `DELETE /api/hives/{hive}/agents/{agent}/github-account`            |

swarm-controller removes every version of the entry from the swarm secret
store, and answers 404 when the store holds nothing there. It refuses `main`: the
swarm mints that account and would re-mint it. The panel requests the list
again after a delete, including a 404 one: the account being already gone is
the end state the delete wanted, so the dialog closes without an error.

The matrix confirmation has a checkbox, off by default, that logs the token
out at its homeserver first (`?revoke=true`). A 401 `M_UNKNOWN_TOKEN` from
that logout means the homeserver already doesn't recognise the token, so the
delete proceeds as if it had succeeded. Any other failed logout, or an account
with no homeserver stored, leaves the account in the store and the dialog
shows why. Deleting a forge account or GitHub token leaves the token valid at
its provider; revoke it there.

The agent isn't told about a delete. Its matrix daemon drops the account when
it next lists the store, within two minutes. Its forge and GitHub units never
delete a file, so a token already fetched into `<state>` stays there.

Where each credential lives and who reads it:
[`credentials.md`](credentials.md).

## Enabling

```nix
services.hyperhive.deploy.swarm-ui.enable = true;   # defaults to deploy.swarm-controller.enable
```

Derived from the controller rather than from `allSwarmServices`:
the UI is a view onto the controller's state and reaches it over that
daemon's socket, so the host that runs the controller is the host that
can serve the UI. A hive that merely _uses_ a swarm has nothing to serve.

The UI answers on `services.hyperhive.swarm.domain` and nothing else. It
shares that name with the swarm-controller it fronts — one service to a
reader and to a certificate — so there is no separate option to pin.

> The apex must differ from `services.hyperhive.domain`. The gateway's
> default server already answers for the hive domain, and two vhosts
> claiming one `server_name` don't error — nginx picks one — so this is
> an assertion rather than a runtime surprise.

## 🔑 You must be in the `admins` group

**This is the step that separates "protected" from "locked out."** The
vhost's `auth_request` asks authelia _"is there a session"_; the rule
that makes it mean _"is this an operator"_ is an `access_control` entry
requiring `group:admins`. An account without that group authenticates
fine and still gets bounced.

```sh
swarmctl user add <you> --email <you>@example.com --group admins
swarmctl user update <you> --add-group admins   # an account that already exists
```

`--email` isn't needed for the UI, but the forge won't create your account
without one → [setup.md § 2](../getting-started/setup.md#2--your-sso-account).

Why a group and not "any session": agents are authelia subjects too, so
_authenticated_ includes every agent in the swarm. The group is the only
thing standing between "an operator's page" and "anyone with a session."

## What it costs to be reachable

hyperhive publishes the apex to the hive's resolver like every other
swarm service, so agent containers can resolve it. That's deliberate and it's
not a hole: **reachability isn't the access control here.** An agent
that resolves the name and connects still has no operator session, and
the subrequest denies it.

## Quick links

The swarm UI's header carries a single 🔗 button, visible on every route,
opening a popover of links to other swarm-wide services. Backed by
`GET /api/links` (swarm-controller), which serves
`services.hyperhive.swarm.controller.links` (a `listOf { label, icon, url }`,
same shape as the per-agent `services.hyperhive.agent.dashboardLinks`).

Links to swarm services come from swarm-level options, so the list is the
same whichever host runs each service:

| link     | URL built from                                    |
| -------- | ------------------------------------------------- |
| Forge    | `services.hyperhive.swarm.forge.domain`           |
| Authelia | `services.hyperhive.swarm.authelia.domain`        |
| Grafana  | `services.hyperhive.swarm.grafana.domain`         |
| Metrics  | `services.hyperhive.swarm.victoriametrics.domain` |
| Logs     | `services.hyperhive.swarm.victorialogs.domain`    |
| Matrix   | `services.hyperhive.swarm.matrix.gatewayHost`     |
| Bao      | `services.hyperhive.swarm.bao.ui.domain`          |

Each entry is present whenever its option has a value — every option in
the table defaults to one, so the link appears even on a swarm that runs
no instance of that service.

`nix/host-modules/swarm-controller.nix` builds these entries. `swarm-ui.nix`
adds one more, for this UI's own API docs. An operator can add entries
directly. An empty list hides the button.

The **Matrix** entry opens the swarm's matrix web client (fluffychat,
`services.hyperhive.deploy.matrix.gui.package`) at the homeserver's
gateway host, `chat.<swarm domain>` by default. The homeserver's host
always serves the client at `/` on that vhost, so the entry is present
whenever the swarm names a gateway host.

The **Bao** entry opens the secret store's web UI, which admits members of
authelia's `admins` group only; see [`secrets.md`](secrets.md#the-browser-ui).

<details><summary>Adding a swarm service name: the two wiring sites</summary>

Adding a swarm service name means touching two things. Missing the
second ships as a different flavour of "works from the host, broken from
a container":

| site                         | file                                                                   |
| ---------------------------- | ---------------------------------------------------------------------- |
| vhost + `gateway.localNames` | the service's own module (for example `nix/host-modules/swarm-ui.nix`) |
| **certificate name**         | `nix/host-modules/swarm.nix` (`serviceDomains`)                        |

<!-- vale write-good.Passive = NO -->

The DNS record and the local-dev `/etc/hosts` entry need no separate
edit: both derive from `services.hyperhive.gateway.localNames`,
which a service's own module already has to push its domain into to be
resolvable — see `nix/host-modules/hive-gateway/dnsmasq.nix` and
`.../default.nix`'s `networking.hosts`. `vhosts.nix` itself is scoped to
the surface the hive's own domain serves (dashboard, per-agent routing,
matrix discovery); a swarm service declares its own vhost next to its
own options, the way `swarm-ui.nix` and `swarm-authelia.nix` do.

<!-- vale write-good.Passive = YES -->

⚠️ The certificate one is the hardest to predict and the most visible when
missed. `serviceDomains` is _both_ the `allowed_domains` the secret
store's `pki/roles/swarm-services` narrows to and the list each gateway's
leaf draws its SANs from (it carries the ones that host fronts),
and the apex is a **sibling** of `forge.<swarm>` / `chat.<swarm>` /
`auth.<swarm>`, not a parent — no CA in the hierarchy issues for it
implicitly. Left out, the vhost falls back to the hive leaf and the
swarm's front page opens with a name mismatch.

</details>

## Cross-references

- [`sso.md`](sso.md) — the authelia instance itself, and the user store.
- [`../networking/gateway.md`](../networking/gateway.md) — the full vhost map and TLS modes.