A new swarm service, swarm-notify-router, in its own container on the host
that sets deploy.notify-router.enable (defaulted on by allSwarmServices where
the host has the router's store leaf, like the claude login minter).
- swarm-controller registers instance-wide hooks for `issues` +
`issue_assign` and `pull_request` + `pull_request_assign`, updates the
event list of a hook already registered with fewer (leaving its active flag as it is), and keeps each
verified body unchanged in the SWARM_EVENTS stream on
$SWARM.events.forge.<X-Forgejo-Event-Type>, deduped by X-Forgejo-Delivery.
A delivery the stream did not keep answers 503.
- swarm-notify-router drains its durable consumer on that stream, runs its
flows (source -> match -> todo sink, stored as nodes plus edges and checked
to be a tree) and queues each op on $SWARM.router.todo.<agent> in the
work-queue stream ROUTER_TODOS. Built-in flows: assigned, unassigned (same
key, rewritten) and closed (prefix-clears every holder's router todos). A
per-issue snapshot in its notify-router-state bucket holds the last
assignees and the todo holders; only agents in the agent-status bucket get
ops, and an assignee that was not one is left out of the snapshot so the
next assign event retries it. After the first event that must be retried,
the rest of the batch is nakked so redelivery keeps stream order.
- hive-agent creates its own durable consumer todo-<agent> and applies each
op to its todo store as subsystem `router`, then acks; a refused op stops
the rest of its batch the same way. The store's (subsystem, key) dedup
makes a redelivery harmless. New Todos::clear_prefix.
- swarm-nats-auth: a --notify-router-client arm; the controller may publish
$SWARM.events.forge.*; each agent gets three {agent} templates (extended
consumer create whose filter the server checks, MSG.NEXT, ACK).
- Credentials: a notify-router store leaf minted by glue-bao-tls, a
swarm-notify-router bao policy (read on its own queue client secret), an
authelia machine client, the secret publisher entry, a journal forwarder
route. No manual step.
hive-forge-notify is unchanged, so agents also still get forge's own
notifications.
Refs #5571
The dashboard's top-of-page warning banner is gone. The warning registry
stays, because /health/ready, the swarm status view and the OTEL gauges
read it. What it feeds is now alerted on in Grafana:
- hyperhive.hive.warning{kind,level}: one series per raised warning, so an
alert names the cause. Raising a warning also logs one `hive warning
raised` line with the message.
- hyperhive.hive.nix_store.utilization: the used fraction of the nix
store's filesystem, probed in the gauge callback.
- Alerts: hh-hive-degraded on the existing degraded gauge, hh-hive-warning
per kind (disk excluded), hh-host-disk-high at 85% and
hh-host-disk-critical at 95%.
- pending_logins is now a registry warning, refreshed from the container
rescan, so it reaches the per-kind gauge.
Frontend: server_warnings leaves the state snapshot, and the dashboard,
flow and stats pages keep only the sticky chrome wrapper. The shared
hive-warn and WarnBanner components stay, since other views use them.
A module-eval case checks each alert's metric name against the exporter's
source, so a rename on either side fails the build.
docs/swarm/README.md gets the routes, the revision, the apply semantics
and the stopped-agent behaviour; the persistence doc points there from
the AGENTS.md entry. The swarm-controller, swarm-controller-api and
swarmctl READMEs and the repo map in AGENTS.md list the new bodies and
routes. docs/tools/swarmctl-cli.md is regenerated for
`swarmctl agent agents-md`, whose help text loses two passive phrasings
vale flags.
A subagent's terminal opened directly showed nothing until the subagent
published again: the relay was a core subscription, though its rows sit
in term-sub-<agent> for 24 hours. It now goes through the agent route's
replay-then-tail, so it opens with the subagent's newest 100 rows and
resumes after Last-Event-ID.
- term_stream.rs: the replay takes a stream name and a filter subject
instead of an agent, and `replay_or_live` (replay, else the live core
subscription) is the one fn both routes call. When the filter is one of
several subjects in the stream, a fresh reader's consumer starts at the
oldest row and drops all but the newest REPLAY_ROWS it counts as
pending, since the stream's newest sequences may belong to sibling
subagents. A single-subject stream (term-main-<agent>) picks its start
with replay_start exactly as before. Tests for both subagent cases.
- subagent_term.rs: the relay calls replay_or_live on the subagent's
subject in term-sub-<agent> and reads Last-Event-ID; module doc and
OpenAPI text no longer say "live only".
- main.rs: the handler test passes the new headers argument.
- swarm-queue-client agent_term.rs: replay_consumer_config takes the
filter subject instead of the agent.
- swarm-queue-client subagent_term.rs: consumer_create_grant, the
extended CONSUMER.CREATE form with a subagent subject as filter.
- swarm-nats-auth policy.rs: the controller holds that grant; the agent
grant's `$SWARM.term.*` filter is two tokens short of a subagent
subject, and the test that refused it now admits it.
- docs/swarm/ui.md, README.md: a subagent terminal opens with its newest
rows.
Fixes#5527
hh-swarm-queue-connect-failed matched "swarm queue connect failed; this
agent publishes nothing upward", which nothing has logged since the
harness started retrying its first connect and exiting (235bc481b). The
rule now matches the error the harness logs when every attempt has
failed, CONNECT_EXHAUSTED in swarm_queue.rs, and its comment and summary
describe the retry-then-exit behaviour.
A failed MintAgentIdentity node logged nothing: the error reached only
the job graph. mint_identity now warns with the agent and the error, and
hh-agent-identity-mint-failed fires on that line.
Refs #4651
swarm-secret-publish and its path unit now run inside authelia's container,
beside the mint, and read each client secret at the path authelia writes it.
The host unit and host path unit, which read the secrets through the
container's root on the host, are gone, and so is
deploy.authelia.hostClientSecretDir, which only they read. The publisher keeps
its store identity, the secret-publisher leaf. The host hands the leaf and the
store's CA into the container as nspawn system credentials, and the unit loads
them; where this host mints the leaf, the container waits for swarm-bao-pki.
Authelia does not wait for the publisher, which retries every 30 seconds while
the store is down.
The container also runs the journal forwarder the other service containers
run, pushing to a receiver of its own on the swarm collector (serviceProducers
swarm-authelia) as a new machine OIDC client (swarm.authelia.otel.clientId)
that authelia registers for itself and the publisher carries to the store. The
fetch unit reads it back under the publisher's leaf, also handed to it as a
system credential, so the swarm-secret-publisher policy gains read on that one
leaf; its stanza keeps create and update, which the exact path would otherwise
take from the services/* prefix. Without the leaf the forwarder is off.
The container drops --link-journal=host, and the host collector stops reading
it. The services' "nothing at <path>" errors name the publisher in authelia's
container.
The dashboard, its API, the swagger UI and the agent routes move to their
own vhost, `swarm.dashboardDomain` = `<hive>.hives.<swarm.domain>`, under
the swarm domain so authelia's session cookie reaches it. `/`, `/api/` and
`/api/docs/` ask authelia through `auth_request`, and authelia's
`operatorsOnly` rule for each hive's dashboard name lets only the admins
group in. The hive domain keeps matrix discovery and redirects every other
path to the new name.
The name rides as a SAN on the hive's own gateway leaf: the per-hive bao
role allows it, and hive-tls asks for it and checks coverage.
HTTP Basic auth is gone: the htpasswd writer and its test, the
`hivectl gateway` verbs and host-socket requests, the `gateway.auth`
options (now a removed-option error), the unauthorized page and the bcrypt
dependency. tmpfiles deletes a leftover gateway.htpasswd, which held
bcrypt hashes at 0644.
c0re hands out dashboard and agent URLs on the new name
(HYPERHIVE_DASHBOARD_DOMAIN), and the swarm controller's hive roster
carries each hive's dashboard name for the swarm UI's hive list.
Closes#3469
A separate $SWARM.control.<agent> subject carries commands, apart from
the text subject. swarm-controller exposes POST /api/agents/{name}/cancel
as a NATS request; the harness answers whether a turn was actually
stopped, through the same cancel path as the dashboard button. The agent
credential gets subscribe on its control subject and allow_responses to
answer; only the controller may publish there.
Refs #3803
The agent's turn-state header ($SWARM.agent-state.<agent>) gains
`needs_login`, set by hive-agent from its own LoginState, so the flag
reaches the swarm without hive-c0re (mara on #5268: "id prefer the agent
container sending the info it needs login without hive").
- swarm-queue-client: `agent_login::Login`, the shared wire type, beside
`agent_inference::Effective`. `needs_login: Option<bool>` with
`#[serde(default)]`: a header from an older agent decodes as `None`
(unknown), never as "needs login" or "logged in".
- hive-agent: the header publisher reads the shared LoginState cell.
Every writer of that cell emits a status on the bus afterwards, so a
login change goes out on the next rebuild, not the 60 s refresh.
- swarm-controller: `agent_login::Reported` follows every agent's header
and keeps the latest flag; `GET /api/agents/status` merges it into each
row as `needs_login` (null when unknown).
- swarm-ui: AgentCard shows a warning-tone "login needed" badge when the
row's `needs_login` is true.
Refs #5268
swarm-logs reads `swarm/agents/<agent>/queue` from the swarm secret
store with the agent's own store certificate (the read hive-agent makes
for its queue connection) and presents it as
`Bearer swarm-agent.<agent>.<secret>`, which the gateway's
swarm-logs-auth checks. On a 401 it reads the secret again and retries
once, so a secret re-minted between the read and the check does not
fail the query.
The OIDC mint against the hive's shared `hive-<h>-agent` client is gone
from swarm-logs, along with the unused `HIVE_AGENT_OIDC_CA_FILE` anchor.
logs.nix now gates on the store address instead of the queue's token
endpoint and wraps the binary with the paths queue-identity.nix gives
the harness; the host forwards the query URL wherever it forwards a
store identity.
The shared client is still delivered into containers; removing that is
Part of #4459.
Every 30 seconds `workers::swarm_limits` reads the `agent-limits` key of
each agent this hive has and stores the result in
swarm-resource-limits.json, where the drop-in, the heap ceiling and the
dashboard read it. A cap therefore follows its agent to whichever hive
runs it.
Each value goes through the hive's own validate_cpu_quota /
validate_memory_max before it is stored, since hive-priv renders it
verbatim into the container's drop-in, and one bad value refuses the whole
set (argus on #4268, carried over from the wanted-state consumer this
replaces). A failed read, or a bucket that does not answer, leaves the
stored caps as they are; three failures in a row raise a banner.
swarm-nats-auth grants every hive `$JS.API.DIRECT.GET.KV_agent-limits.>`:
read-only, and every agent's key, not just the hive's own. Scoping it to
the hive's agents would need a roster in the auth responder, which
policy.rs argues against. mara chose this on #4268 (c95293); narrowing it
is a possible low-priority follow-up, not planned. A test pins that the
grant reads every key, writes none, and reaches no other bucket.
Contributes to #3865.
Requesting the forge account `review-classifier` as a reviewer now runs the
repo's rules against the PR and posts the result as that account's review,
on the head commit the run read. A push starts no run; only a fresh review
request does.
- An instance-wide `pull_request_review_request` system hook delivers to
`/webhook/forge/review-request`. A request for any other reviewer, or a
removed request, does nothing.
- The controller reads the PR, loads the rules with the same reader as
`GET /api/review-classifier/rules`, sends one request on the try-out
subject, and posts APPROVED or REQUEST_CHANGES with the table as the body.
- With no clean verdict (PR or rules don't load, the run fails, or any
classification has no answer) it posts a COMMENT saying why, never an
approval. The event is one function, `no_clean_verdict_event`.
- Table cells are flattened, markup-escaped, and every `@` gets a
zero-width space, so a model's reason can't break the table or mention
anyone.
- At most two requested reviews run at once; the rest wait in memory.
- The account is minted the way hive accounts are: a five-minute pass
queues a `MintClassifierForgeToken` node when the token at
`swarm/services/review-classifier/forge/token` is missing or stale. The
token is `write:repository`. The controller's bao policy gains that leaf
(create/read/update), pinned in module-eval bao-grants. The classifier
never sees the token.
The account gets no repo access automatically; a repo admin adds it by
hand. A re-request retires the account's earlier review: Forgejo clears
`official` on a reviewer's earlier reviews when it is requested again
(models/issues/review.go AddReviewRequest, v16.0.5), and approvals and
rejection blocks count official reviews only.
Refs #5137
Agents reach the operator over matrix now (#5115). A `send` to
`operator` is refused, by the broker and by the MCP allow-list check,
with an error that names the matrix MCP tools. The dashboard's Y3R C4LL
tab goes with it: the operator inbox, `GET /api/operator-inbox`,
`Broker::unread_for_recipient`, and the browser notifications that only
ever fired on operator-bound messages.
The harness no longer posts turn failures and plugin-install failures
to the operator inbox. Both are already logged at warn; a new Grafana
rule, `hh-agent-turn-failed`, fires per agent on the harness's
`turn failed` line.
Dashboard-to-agent messaging (op-send, the agent web UI's message box,
mark-all-read for agent inboxes) is unchanged.
Decisions per mara on #5115: q1 a, q2 a plus a grafana alert, q3 keep
dashboard-to-agent messaging and leave swarm-level code alone.
swarm-controller now creates `term-main-<agent>` for every live agent, in
the same one-minute pass and with the same config style as
`term-sub-<agent>` (#4897): subjects `$SWARM.term.<agent>` only, max_age
24h, max_bytes 64 MiB, discard Old, max_message_size from the queue's
max_payload. An existing stream is opened as it is. The agent keeps its
plain publish on `$SWARM.term.<agent>` and gets no JetStream subject.
`GET /api/agents/{name}/term/stream` creates an ephemeral push consumer on
that stream starting 100 rows back, so a swarm-ui terminal opens with
recent history and then follows new rows, in order, from one
subscription. Each SSE event carries the row's stream sequence as its id,
and a reconnect's Last-Event-ID resumes after it. Without the stream the
route falls back to the live core subscription it used before.
The stream is `term-main-<agent>`, not `term-<agent>`: an agent may be
named `sub-x`, whose `term-<agent>` would be agent `x`'s subagent stream.
Its one literal subject cannot match `$SWARM.term.<agent>.sub.>`, which
needs more tokens, so the two streams never overlap.
The reader gains `$JS.API.CONSUMER.CREATE.*.*.$SWARM.term.*`, the
extended create form whose last tokens are the consumer's filter. Checked
against nats-server 2.14.4, the trailing `*` also admits a literal `*` or
`>` filter, so a consumer under it reaches any terminal row, main or
subagent; those are rows the reader already subscribes to and reads with
`STREAM.MSG.GET.*`.
Closes#4826
Add docs/swarm/review-classifier.md, the high-level architecture of the
planned PR review classifier pipeline, written as the full target shape
under a "planned, not implemented yet" banner. Link it from docs/README.md
and the docs/swarm/README.md piece list.
The page reflects the epic description and the operator's answers in the
epic thread; points still open are listed in its "Still open" section.
The banner names the epic by title rather than by number because the
tracker-tag lint rejects issue references in tracked files.
The header on `$SWARM.agent-state.<agent>` went out only when a bus event
changed it, and the core subject keeps nothing for a late subscriber. An
idle agent therefore said nothing to a reader that attached after its
last change: swarm-controller after a restart showed `effective: null`
for that agent until its next turn, which can be hours.
The publish loop now also wakes every 60 s and re-sends the current
header through the same `publish` path (clearing the dedup state first).
Transitions still go out as they happen. Same subject, same grant.
An agent whose queue connection is down now logs `swarm agent state:
publish skipped` once a minute even while idle, so the
`hh-swarm-agent-state-publish-skipped` alert also fires for idle
disconnected agents, not only busy ones.
Refs #5034
Each agent now reports the model and effort it runs on, and where each
comes from (`swarm`, `agent_nix`, `local_file` or `default`), in its
turn-state header on `$SWARM.agent-state.<agent>`: `effort`,
`model_source` and `effort_source` join `model`. The shared
`swarm_queue_client::agent_inference::{Effective, Source}` types spell
those fields for both ends.
The Bus keeps a source next to the model and effort. `Bus::new` takes it
from the local fallback chain (`harness_state::local_model` /
`local_effort`, which now return the source with the value), a `/model`
or `/effort` pick sets `local_file`, and the swarm poller sets `swarm`
or, on a clear, the local chain's source. A swarm value equal to the one
the agent already runs is now applied once, so the source moves to
`swarm` and the header is republished; before, `next()` skipped it as
unchanged.
swarm-controller subscribes to every agent's header with the reader
grant it already holds for the state relay, and keeps the latest
inference fields per agent in memory (`inference::Reported`).
`GET /api/agents/{name}/inference` now answers
`{configured, effective}`, `effective` being `null` until the agent's
first header with these fields since the controller started.
`swarmctl agent inference get` prints both; `set` reads `configured`.
Refs #5034
hive-c0re publishes this hive's status to the swarm queue as the OIDC
client `hive-<name>`. Its secret came from
`deploy.hive-controller.statusPublish.clientSecretFile`, which defaulted
to authelia's minted file only on a host running both authelia and the
queue. Every other hive had no secret and never published, so the
controller showed it `never_reported`.
Now `swarm-secret-publish`, beside authelia, also copies each hive's
`hive-<name>` secret to `swarm/hives/<hive>/oidc/client`. Its policy
already allows `swarm/hives/*`. hive-c0re reads that path under the
hive's own store leaf, which the existing `swarm/hives/<hive>/*` grant
covers, and holds the value in memory.
The shared queue client no longer remembers a failed first connect for
the life of the process. A failed attempt is retried with a backoff
from 5s, doubling to a cap of 5 minutes; the dashboard banner stays up
until an attempt succeeds. The two status publishers wait for the
client instead of giving up on the first `None`, so a secret published
after boot is picked up without a restart.
Removed: the `statusPublish.clientSecretFile` option (both spellings,
now removed options with a message), its same-host default, its
LoadCredential, the assertion tying it to the other two coordinates,
and `swarm_queue_client::QueueConfig::from_env`, whose only caller was
this read. Publishing is now on wherever the queue URL and token
endpoint are set and the hive holds a store leaf.
Refs #5015
swarm-controller keeps each agent's inference settings in a new
`agent-inference` KV bucket, one key per agent, and is its only writer
(`GET`/`PUT`/`DELETE /api/agents/{name}/inference`; `swarmctl agent
inference get|set|clear`). Every field is optional. Each agent reads its
own key every 10 s through a direct-get grant on that key alone, and a
set `model` or `effort` replaces the Bus value, so the next turn runs on
it and the badge follows.
The swarm value is applied without persisting it: `Bus::set_model` and
`set_effort` are split into a persisting setter and a non-persisting
`apply_*`, and the poller uses the latter. Otherwise the swarm value
would overwrite `hyperhive-model`/`hyperhive-effort`, and clearing it, or
a restart, would no longer find the agent's own value. An unset field
changes nothing; a field cleared after being applied goes back to the
local value (`harness_state::local_model`/`local_effort`, the same
resolution `Bus::new` uses), read again at the clear.
`subagent_models` is validated, stored and shown by `get`; no agent
applies it yet.
Refs #5034
With actionsFromSelf, Forgejo resolves bare `uses: actions/<name>` against
the forge itself, so every action a workflow names needs a mirror there.
Only actions/checkout was seeded, and coverage.yml's
`actions/upload-artifact@v3` has failed at job setup with "repository not
found" since the CI runner moved to swarm-ci-runner (e2da5509).
The single hardcoded checkout mirror becomes a list of action names both
share, mirrored from github.com/actions/* like checkout already was. v3
points at the same commit (ff15f03) on github.com and code.forgejo.org.
The controller's forge-objects pass creates any missing mirror on every
pass, and the changed SWARM_CONTROLLER_FORGE_MIRRORS env restarts the unit
on switch, so an existing forge picks the mirror up on deploy.
Closes#5040
Agent creation gains a GrantDocsRead node (after CreateForgeUser) that adds
the agent as a read collaborator on internal/docs, and forge::docs_grant
runs a pass over the store's hive-agent-* roster at start and every five
minutes that queues the same job for any agent that is not one. The pass only
adds; an unreadable roster or forge read changes nothing.
hive-c0re drops shared_docs_access, its call in sync_agent, and the
SHARED_ORG / SHARED_DOCS_REPO constants only it used.
A hive's queue credential and the swarm controller's could subscribe to
every subject in the swarm account, so a hive could read every other
hive's deploy requests and every agent's terminal, state, input and
request replies.
Their grants now carry a subscribe allow-list:
- a hive `hive-<h>`: `$SWARM.knowledge`, `$SWARM.deploy.<h>` and its
reply inbox `_INBOX.client.hive-<h>.>`
- the reader (swarm-controller): `$SWARM.term.*`, `$SWARM.term.*.sub.*`,
`$SWARM.agent-state.*` and its reply inbox
`_INBOX.client.<client-id>.>`
`swarm_queue_client::connect`, which hive-c0re and swarm-controller both
use, now connects with `_INBOX.client.<client-id>` as its inbox prefix,
the same shape agents got for their own credential. In async-nats 0.50
every request reply and every ordered consumer (the hive's wanted-state
watch, the controller's KV key listings) delivers under that prefix, so
the one inbox grant covers them all.
A hive or controller still on a build without the prefix has every
JetStream reply refused once the responder runs this policy, so the
clients need to be rebuilt before, or with, swarm-nats-auth.
Closes#4945
glue-nats-bao-identity.nix and glue-matrix-ctl-bao-identity.nix defaulted
deploy.nats.baoClient{Cert,Key}File and deploy.matrix.ctlBaoClient{Cert,Key}File
to siblings of deploy.bao.clientCertFile, the hive's own store reader. That
pointed a store host whose reader was moved at files nobody mints, and on a
queue or homeserver host without the store that held a placed hive reader
invented a nats.pem / matrix-ctl.pem path beside it.
Both glues are now gated on the store running on this host
(deploy.bao.enable, the condition glue-bao-tls.nix mints under) and name the
directory the minting unit writes to, through nix/host-modules/lib/bao-pki-dir.nix.
Host shapes:
- Store host, default reader: unchanged. The evaluated paths stay
/var/lib/swarm-bao-pki/nats{,-key}.pem and
/var/lib/swarm-bao-pki/matrix-ctl{,-key}.pem, and the rendered units are
the same.
- Store host whose hive reader was moved: now gets the leaf minted there.
- Queue or homeserver host without the store, holding a hive reader and not
naming these options: no default any more. It still evaluates (neither
option has an eval assertion). swarm-bao-nats-tls exits 1 naming
deploy.nats.baoClient{Cert,Key}File when the queue's certificate is missing
or due for renewal; swarm-bao-matrix-oidc exits 1 naming
ctlBaoClient{Cert,Key}File, and the swarm appservice render/publish units
and the PKI bind mount no longer render. If that host had placed nats.pem
or matrix-ctl.pem beside its hive reader, it worked before and now needs
both options named.
- Hosts without the store and without a hive reader, and hosts naming the
options: unchanged.
Both refusals and option descriptions now say the default comes from
deploy.bao.enable.
Refs #4921
The docs, option descriptions and comments that named the swarm root, the
swarm CA or the hive CA as an existing trust anchor now name the secret
store's pki root or the trust bundle that holds it:
- docs/swarm/README.md, secrets.md, bao.md
- deploy.bao.clientCaFile's and gateway.verifiedProxyTo's descriptions
- comments in hive-c0re/src/meta.rs, hive-agent/src/swarm_queue.rs,
swarm-logs/src/auth.rs, swarm-controller/src/vcs_metrics.rs,
hive-forge, swarm-authelia, swarm-ci-runner, glue-bao-tls, swarm-bao,
swarm-grafana, swarm-otel, otel, hive-c0re, lib/hive-ca-trust.nix,
hive-forge/Cargo.toml and the flake-update workflow
Nothing behaves differently: every edit is a nix, Rust or TOML comment, an
option description, or a test assertion message. The Rust edits change the
workspace source, which this PR already rebuilds for hivectl.
Refs #4588
The gateway leaf comes from the store's pki mount, so a hive CA's
certificates anchor nothing and its key is a secret outside the store.
- hive-tls-ca writes trust-bundle.pem from swarm-services-root.pem alone;
the ca.pem and ca-previous.pem slots are gone.
- Every host deletes ca.pem, ca-previous.pem and ca-key.pem in
deploy.hive-controller.tls.stateDir with tmpfiles `r` rules that follow
the option. The removal shim, now host-ca-removed.nix, holds these
beside the /var/lib/swarm-ca rule and the swarm.ca.* removals.
- deploy.bao.clientCaFile, deploy.bao.serverCaFile and
deploy.swarm-controller.hiveClientCaFile naming /var/lib/swarm-ca or one
of the deleted hive CA files fail evaluation, naming the store's mTLS CA
(/var/lib/swarm-bao-pki/ca.pem on the store's host) as the replacement.
module-eval hive-tls covers the single-anchor bundle, the deletion (incl.
a relocated stateDir) and the assertion on all three options.
Refs #4588
The CI runner was a hive deploy module: hive-ci.nix ran it beside the
forge, and hive-c0re registered it through the forge's admin API with
the `core` token, writing the registration token through hive-priv. It
could only run on the forge's host, and it kept an admin-scoped forge
token on a hive.
Now the runner is a swarm service:
- swarm-ci-runner.nix runs it in a `swarm-ci-runner` container on the
host that sets deploy.ci-runner.enable, reaching the forge by name.
It needs neither the forge nor a hive there.
- swarm-controller reads the forge's runner registration token with its
own admin token and writes it to swarm/services/ci-runner/
registration-token whenever it differs from what it last wrote. Its
grant on that path is create/update only.
- The runner's own leaf (CN swarm-ci-runner, role and policy of the same
name) reads that one path. swarm-bao-ci-runner.service fetches it into
the runner's EnvironmentFile and restarts the runner on a change.
- A pre-start step removes .runner when the daemon's journal since its
last start holds Forgejo's "unregistered runner" refusal (the daemon
exits 1 when its startup Declare gets it), or when .runner names
another forge address; upstream's pre-start step then registers again.
Removed from the hive side: hive-ci.nix and deploy.forgejo.ci.*,
forge/ci_runner.rs, PrivRequest::RegisterCiRunner and its handler and
ReadWritePaths entry, InfraContainer::Ci with hivectl's --ci and the
dashboard's hive-ci journal entry, HYPERHIVE_FORGE_CI_ENABLED, and
read:admin,write:admin from CORE_TOKEN_SCOPES: nothing else in hive-c0re
calls /api/v1/admin/*. The old ci options, under both swarm.forge.ci and
deploy.forgejo.ci, now fail evaluation naming deploy.ci-runner.
The forge's half of the old ci.enable, the actions/checkout mirror and
DEFAULT_ACTIONS_URL = self, is deploy.forgejo.actionsFromSelf.
Closes#4954
config-changes.md (was approvals.md) describes config PRs, the meta flake
and helper events; the approval queue, its kinds, the withdraw path, the
job-queue dispatch and ApprovalResolved go. Every other page drops the
approvals table, endpoints, event, tool group, hivectl verbs, dashboard
section and the loose-end/cancel kind, and links to the renamed page.
Docs (review on #4948): the harness's restart settings are not useful to
a reader, so the `Restart`/`RestartSec` bullet in docs/turn-loop and the
"30 seconds later, no start limit" wording in docs/swarm are removed.
What stays is the behaviour: the harness exits and comes back until the
queue accepts it.
Grant: with the harness's shared-client fallback gone, nothing presents
the hive's shared agent client (`hive-<hive>-agent`) to the queue;
swarm-logs uses that OIDC client over HTTP only. swarm-nats-auth now
refuses it outright instead of granting the configured
`$SWARM.term.{hive}.>` / `$SWARM.agent-state.{hive}.>` publish and its
`_INBOX.client.<id>.>` subscribe, so an agent holding it can no longer
publish as a sibling. The agent arm still runs before the hive arm, so
that id never falls through to its hive's grant.
Removed with it: the `--agent-publish-subject` flag and its two uses in
swarm-nats.nix, `Policy`'s agent subject list, and
swarm-queue-client's `client_inbox_prefix`. The module-eval now asserts
the flag is absent; the policy tests assert the refusal and that the
hive itself is still admitted.
An agent's harness connects to the swarm queue with the agent's own
credential or not at all. The first connect retries after 5s, doubling
(7 attempts, about five minutes), with a warning per failed attempt;
when every attempt fails the harness logs an error and exits 1. Missing
coordinates (HIVE_AGENT_NATS_URL, or the secret store's BAO_ADDR /
HIVE_AGENT_NAME / certificate) fail the boot outright.
Previously the first connect's outcome was memoized for the life of the
process: a store 403 or queue refusal at boot left the agent on the
hive's shared client, or disconnected, until someone restarted it, and
an agent with no queue coordinates ran on without one. Both paths are
gone, with the hive-scoped subjects that only the shared client used.
The harness unit now restarts after 30s instead of 2s, so a swarm-wide
outage doesn't restart every agent every 2s, and has no start limit, so
it keeps coming back however long the outage lasts.
The hive's shared client credential is still imported into the harness
unit for swarm-logs; the two HIVE_AGENT_OIDC_*_FILE variables that
pointed the harness at it are dropped, as is the unset
HIVE_AGENT_OIDC_CA_FILE override.
With the fallback gone, the pieces #4944 added only for it go too:
swarm_input's skip-on-shared-client branch and swarm-queue-client's
connect_with_inbox_prefix. swarm-nats-auth's grant for the hive's shared
agent client is unchanged.
Closes#4909
Every hive gets its own store identity (CN
<deploy.bao.hiveLeafCommonNamePrefix>-<hive>) and its own role on the
existing pki mount (<deploy.bao.hiveLeafPkiRolePrefix>-<hive>), whose
allowed_domains is the hive's domain and *.<domain>. The policy grants
update on that one issue path. swarm-bao-hive-leaf-policy writes role,
policy and cert-auth role for every hive in swarm.hives; the store's host
mints its own hive's identity in glue-bao-tls.nix and a new glue file
points deploy.hive-controller.tls.baoHiveIdentity{Cert,Key}File at it.
Hives on other hosts place it by hand. swarm.nix reserves the composed CN.
hive-tls-ca no longer generates a hive CA or signs a leaf: caGenScript,
signLeafScript/signHiveLeaf and the adoption block are gone, ca-key.pem
is deleted where it exists, and the unit only assembles trust-bundle.pem.
The retired ca.pem/ca-previous.pem stay in the bundle so leaves they
signed keep verifying.
hive-tls-resign becomes the bao issuance: at boot, on deploy and from a
daily timer it re-issues when the leaf is missing, past half the role's
lifetime, missing a name, or not chained to the store's pki root. Nothing
orders the gateway after it, so a valid leaf on disk never waits on the
store; a failed renewal leaves the leaf in place. A missing identity
fails the unit naming both options, as does the root fetch on a hive
fronting no swarm name, which now presents this identity instead of the
reader cert.
caValidityDays and leafValidityDays are removed (both spellings), since
nothing reads them.
Refs #4588
An agent's queue credential could subscribe to every subject in the swarm
account, so any agent could read every other agent's terminal, turn state,
operator input and request replies. Agents are the least trusted clients
on the queue (mara's ruling on #4901), so their grants now carry a
subscribe allow-list:
- an agent's own credential (the harness and its subagent daemon):
`_INBOX.agent.<agent>.>` and `$SWARM.input.<agent>`
- the hive's shared agent client: `_INBOX.client.<client-id>.>`
Hive and swarm-controller grants are unchanged (no `sub` claim, so still
every subject).
The clients connect with the matching inbox prefix, so the replies they
rely on still arrive: the icon write's JetStream ack and the schedule
DIRECT.GET. `connect_with_token` takes the agent name and sets the prefix
itself; the hive-shared fallback uses the new
`connect_with_inbox_prefix`.
The harness no longer subscribes to its input subject when it fell back
to the hive's shared client: that identity names no agent, so it cannot
be granted one agent's input without all of them. It logs that and
skips, the same as the schedule reader on that path.
Refs #4901
- swarm.serviceDomains lists every swarm service name on every host. The
store's issuing role is built from it, so the store now admits a leaf
for grafana, metrics, otel, logs, the bao UI and the apex whichever host
runs the store. Each gateway's own leaf stays narrowed by
localServiceDomains.
- swarm.matrix.apiUrl defaults to http://<swarm.matrix.gatewayHost>
(null when gatewayHost is null) instead of loopback on the matrix host.
- The authelia vhost proxies /bridge/ to swarm-authelia-bridge with the
prefix stripped, and deploy.swarm-controller.authBridgeUrl defaults to
${swarm.authelia.url}/bridge on every host. swarm.authelia.bridgeUrl is
removed.
- swarm-authelia-bridge admits only swarm-controller's OIDC client on
every request (403 for any other active token), configured by
SWARM_AUTHELIA_BRIDGE_CONTROLLER_CLIENT_ID (renamed from
..._OPERATOR_READER_CLIENT_ID, which gated ListOperators alone).
- swarm.peerHives is removed; swarm-wireguard.nix filters this host's own
hive out of swarm.hives itself.
Closes#4933
swarm-controller keeps every scheduled prompt (id, name, agents, body,
anchor, interval, paused) as one document under one key of a new
`schedule-definitions` KV bucket, so each change is a single
compare-and-set and a prompt exists for all of its agents or none. It
writes each agent's key of a new `agent-schedules` bucket as the prompts
naming that agent, without names or other agents, after every change and
on a one-minute reconcile pass. It is the only writer of both, behind
GET/POST /api/schedules and PATCH/DELETE /api/schedules/{id}.
`swarmctl schedule add|list|edit|pause|resume|rm` drives those routes over
the controller socket.
An agent's own queue credential is granted one more subject, the direct
get of its own key in `agent-schedules`. A KV watch is not granted: its
consumer create subject carries no key, so it would cover every agent's.
hive-agent's new schedule ticker reads that key every 10 seconds and fires
due slots as the same `schedule:<id>` todo hive-c0re's worker pushes. Fire
times are anchor + k*interval; the last fired slot per schedule id is kept
in the state db, so a body edit or list refresh never moves or refires a
slot, downtime fires the latest missed slot once, a restart refires
nothing, a one-shot fires once, and paused slots are skipped.
Refs #4914
The controller-created term-sub-<agent> stream had max_age only, so a
publishing agent could grow it without bound for 24h. Add a 64 MiB
max_bytes cap with discard: Old (oldest rows drop first, publish never
fails on the cap), and size max_message_size off the queue's live
max_payload rather than a hardcoded guess.
swarm-controller now creates `term-sub-<agent>` for every agent a hive is
declared to run, at start and every minute after, with the config
`swarm_queue_client::subagent_term::open_or_create` spells (subjects
`$SWARM.term.<agent>.sub.>`, max_age 24h). An existing stream is opened as
it is, as the controller does for its other streams and buckets, under the
`$JS.API.STREAM.CREATE.*` grant it already holds.
The agent no longer creates the stream: its token is granted publish on
`$SWARM.term.<agent>.sub.>` and no `$JS.API.STREAM.CREATE|INFO` subject,
and the subagent daemon only publishes. A `CREATE` carries the stream's
config in its payload, which no subject grant narrows, so the agent could
otherwise pick the stream's subjects and limits.
An agent's subagent daemon publishes each subagent's output as terminal
rows on `$SWARM.term.<agent>.sub.<subagent>`, as the agent, into a
per-agent stream it creates itself; swarm-controller lists an agent's
subagents from that stream's subjects and relays one subagent's rows as
SSE; the swarm UI lists them under the agent's terminal preview and
reuses AgentTermPreview, full-screen tab included, with no input.
- swarm-nats.nix: the agent token may also publish
`$SWARM.term.{agent}.sub.>` and `$JS.API.STREAM.CREATE|INFO` on
`term-sub-{agent}`, and nothing else of JetStream. A module-eval arm
pins the agent-token grant as an exact list.
- mcp.nix: hive-subagent-daemon loads the agent's store identity
(`hive-agent-bao-cert/-key/-server-ca`, the ones hive-agent loads)
whenever the agent has a store, not only on the opencode preset. The
agent's own queue secret lives in the store, so this is the credential
the harness connects with.
- hive-subagent-mcp: `swarm_term` reads the agent's queue secret under
that identity, connects with the agent token, opens or creates
`term-sub-<agent>` (max_age 24h), and publishes classified rows from
the sink every subagent line already passes through. The sink only
queues (bounded, drop-and-count); a missing store, refused credential,
failed stream create or failed publish is a log line.
- The stream-json classifier (`stream_enrich`) and the `TermMsg` row
types plus `fit` move from the hive-agent binary into hive-sh4re, so
the subagent daemon publishes the rows AgentTermPreview already
renders. hive-agent keeps its LiveEvent classifier on top.
- swarm-controller: `GET /api/agents/{name}/subagents` and
`GET /api/agents/{name}/subagents/{subagent}/term/stream`.
- docs/swarm: what the UI shows and what the queue carries.
Closes#4827
- hive-c0re/README.md: drop deleted webhook_secret.rs from the module
list
- docs/swarm/README.md, docs/agent-lifecycle/approvals.md: rewrite
temporal wording (legacy/older-release phrasing) as current
behaviour
- docs/swarm/README.md: note that a lost closed delivery deploys
nothing and how the operator recovers
The hook a hive registered on the agent-configs org points at its
/webhook/config-pr route, which no hive serves any more, so every
config-repo event fails delivery to it. The forge sweep now deletes it.
Only a hook whose URL equals this hive's own exactly is removed. The same
path on another base belongs to another hive and is left alone. A forge
error is logged and boot continues; once the hook is gone the step is a
no-op.
Closes#4850
Rewrites the config-change flow around the forge merge and the
DeployRequest{rev} deploy, drops the MergeConfigPr approval, its deploy
DAG, the hive's `/webhook/` route and the `core` merge allowlist from
the docs, and states that operators join the `operators` team by hand.
Refs #4850
docs: the config-repo `main` merge gate (merge = `core` + team
`operators`, approvals = `operators`), the operator merge in the forge
UI and what it deploys, the hand-added `operators` membership, and that
with no eval-verify a failed rebuild leaves `applied/main` at the merged
commit. The swarm README lists the converged gate and the merge deploy.
`merged()` also requires `pull_request.base.ref == "main"`: the hive
deploys its config repo's `main`, so a merge into another branch would
only cost a forge fetch and a refusal comment (argus, #4894).
Refs #4850
The swarm.domain assertion in hive-network.nix fired on every host that
imported the module, so a host that enables nothing failed eval. It now
fires only when one of the hyperhive service switches is on (every
deploy.*.enable that runs something, gateway, gateway.dns, network,
otel, snapshotStore). The requirement itself is unchanged: any host that
runs a hyperhive service still needs swarm.domain.
The core-toggle module-eval suite gains a case: a missing swarm.domain is
refused on a hive and on a swarm-service-only host, and a host enabling
nothing passes every assertion.
Closes#4887
swarm/README.md opens with the swarm and its control plane; hive identity
and the directory follow as the substrate. Upgrade notes move into a
<details> block, the per-agent queue publishing detail into another, and
the one-paragraph pointer sections collapse into a link list.
Fact fixes, checked against origin/main:
- an empty swarm.hives fails eval (swarm.nix:341-354); it does not mean
"not in a swarm"
- swarm.domain is required with a hive (hive-network.nix:156,188), hiveName
with a hive, store or homeserver (hyperhive.nix:161-166)
- the matrix container trusts the hive's trust-bundle.pem at runtime under
self-signed certs (hive-matrix.nix:1046-1052, lib/hive-ca-trust.nix:76-85)
- singleHostSwarm also defaults the controller, localHostsEntry, the nats
callout keys and the bao bootstrap token path (local-defaults.nix:72-129)
- swarm-controller serves far more than /health: roster, wanted state, job
graph, agent creation and credential mints (main.rs:2874-2899)
- swarmctl user add needs --email for the forge account and refuses an
existing user (setup.md:67-71, swarmctl/src/main.rs:425-430); document
agent mint-identity and mint-forge-token
- agent creation also mints store identity, forge token and matrix
account, and declares the agent paused (main.rs:1822-1920, 247-248)
Refs #3902
