Both are ignored with a warning through the same shim, now
nix/host-modules/hive-options-removed.nix.
- otel.metricIntervalMs: claude in every agent and hive-c0re's
container-resource exporter run at the 60s default. The agent-level
services.hyperhive.agent.otel.metricIntervalMs, set only by the meta
render, goes too (warning shim in nix/agent-modules/otel-removed.nix).
- otel.debug: services.hyperhive.agent.otel.debug stays, documented and
set in an agent's own config; the meta render no longer emits it.
Both options are now ignored with a warning (the swarm-peers-removed.nix
shape), so a host that still sets one keeps evaluating.
- operatorPronouns: the agents' system prompt names the pronouns as
she/her, the value the harness fell back to and the option's default.
The --operator-pronouns flag, HiveEnv field, meta-flake let binding
and HIVE_OPERATOR_PRONOUNS env var are gone.
- contextWindowTokens: the per-family defaults (haiku 200000, sonnet
1000000, opus 1000000) move into hive-agent's harness_state as a
table; the window the API reports after a turn still wins. The
--context-window-tokens flag, HiveEnv field and the rendered
HIVE_CONTEXT_WINDOW_TOKENS_<KEY> env vars are gone.
swarm-secret-publish and its path unit now run inside authelia's container,
beside the mint, and read each client secret at the path authelia writes it.
The host unit and host path unit, which read the secrets through the
container's root on the host, are gone, and so is
deploy.authelia.hostClientSecretDir, which only they read. The publisher keeps
its store identity, the secret-publisher leaf. The host hands the leaf and the
store's CA into the container as nspawn system credentials, and the unit loads
them; where this host mints the leaf, the container waits for swarm-bao-pki.
Authelia does not wait for the publisher, which retries every 30 seconds while
the store is down.
The container also runs the journal forwarder the other service containers
run, pushing to a receiver of its own on the swarm collector (serviceProducers
swarm-authelia) as a new machine OIDC client (swarm.authelia.otel.clientId)
that authelia registers for itself and the publisher carries to the store. The
fetch unit reads it back under the publisher's leaf, also handed to it as a
system credential, so the swarm-secret-publisher policy gains read on that one
leaf; its stanza keeps create and update, which the exact path would otherwise
take from the services/* prefix. Without the leaf the forwarder is off.
The container drops --link-journal=host, and the host collector stops reading
it. The services' "nothing at <path>" errors name the publisher in authelia's
container.
start_manager bound the same path register_agent binds. The migrate branch, hive-priv-sock::MANAGER_NAME and MANAGER_CONTAINER were no-ops or dead. The send allow-list docs promised a manager exemption the code never had. Tests that used ruth as the manager fixture use plain names.
ruth is created from the swarm dashboard like any agent. An existing ruth container starts at boot through the boot reconcile, like every other agent. A definition of services.hyperhive.ruthless now fails evaluation with a removal message.
Drop the H0M3 tile hub and the core page. The dashboard is now the index;
kept state is its fifth tab. A pages menu in the chrome links flow, stats,
API docs and the swarm UI. The swarm apex URL comes from
services.hyperhive.swarm.domain via HIVE_SWARM_PUBLIC_URL and the new
swarm_public_url field of the state snapshot.
start_many mapped every read error on the marker to None via .ok(), so the
agent went down the rebuild path while the log blamed a stale rev. A missing
marker stays silent; any other error now logs the path and error. Control
flow is unchanged.
Only a missing file counts as 'marker absent'; any other read error (EACCES,
EIO, non-UTF-8) used to read as empty, so the agent's flake.nix was replaced
and committed.
find_space_by_name and find_chat_room_by_name carried the same 52-line
body and differed only in the space test and the name. Both now call
find_joined_room(base, want_space, name). Same requests, same order,
same return values.
The one-shot marker was written with create_dir_all(..).ok() and
fs::write(..).ok(), so a failure was invisible and the avatar upload
repeated on every start. Log the path and error; startup still succeeds.
open_stream takes its deadlines as parameters so the tests can use short
ones. The header-write test connects to a peer that holds the connection
without reading and sends a header larger than any loopback buffer; the
connect deadline is tested through the shared bounded helper with a
future that never completes, since a connect that hangs is not
reproducible without the network. The module-eval case asserts the
unit's RuntimeMaxSec and that the receiver script reads its header with
a timeout.
The receiver blocked in read until a peer sent a header, and a stalled
btrfs receive was never reaped, so a silent or stuck connection held a
root service instance indefinitely. The receiver now gives the header 30 s
and the unit has RuntimeMaxSec=6h.
The sender had no deadline on the TCP connect or the header write, so an
unreachable mesh address held the admin-socket handler until the kernel
gave up. Both now time out after 15 s and report it like any other
failure. The stream body stays unbounded on the sender: the receiver's
RuntimeMaxSec already caps it, and btrfs send writes it outside this
process.
The parameter was discarded with a comment claiming kept_state_names
takes &self; it is an associated fn with no receiver. Removes the
parameter, the false comment and the argument at both callers.
Three git spawns in workers/auto_update.rs and workers/knowledge.rs used
a bare tokio Command, so they ignored HYPERHIVE_GIT and, when the job
queue's deadline dropped their future (the knowledge pull has a 5 minute
one), the git child was left running instead of killed.
They now use lifecycle::git_command(), as the other git calls in
knowledge.rs already do.
Agents are handed `http://hive-collector.<swarm domain>:<port>` as their
otel endpoint instead of `http://<bridge IP>:<port>`. Every hive running
its collector contributes the name to `gateway.localNames`, so its own
dnsmasq answers it with its bridge IP, the way the queue's name already
works. The rendered meta flake then carries no hive-specific address,
which a swarm-level render needs (#4857, operator ruling 100744: "b").
hive-c0re's own exporter keeps the bridge address: on the host the name
may resolve to loopback through `gateway.localHostsEntry`, where the
receiver does not listen.
The name sits under the swarm domain and starts with `hive`, a fragment
no hive name may contain, so no hive's default domain can take it.
The dashboard, its API, the swagger UI and the agent routes move to their
own vhost, `swarm.dashboardDomain` = `<hive>.hives.<swarm.domain>`, under
the swarm domain so authelia's session cookie reaches it. `/`, `/api/` and
`/api/docs/` ask authelia through `auth_request`, and authelia's
`operatorsOnly` rule for each hive's dashboard name lets only the admins
group in. The hive domain keeps matrix discovery and redirects every other
path to the new name.
The name rides as a SAN on the hive's own gateway leaf: the per-hive bao
role allows it, and hive-tls asks for it and checks coverage.
HTTP Basic auth is gone: the htpasswd writer and its test, the
`hivectl gateway` verbs and host-socket requests, the `gateway.auth`
options (now a removed-option error), the unauthorized page and the bcrypt
dependency. tmpfiles deletes a leftover gateway.htpasswd, which held
bcrypt hashes at 0644.
c0re hands out dashboard and agent URLs on the new name
(HYPERHIVE_DASHBOARD_DOMAIN), and the swarm controller's hive roster
carries each hive's dashboard name for the swarm UI's hive list.
Closes#3469
Until its first successful read of its key, the harness read its
permissions as the default set, `execution` included. So did the
subagent daemon. An agent the operator had narrowed ran wider than
granted after every restart while the queue was unreachable, and in the
gap before the first 10 s poll. During the meta-repo import, every
non-ruth key is still unset, and the agent read that as the default too,
for as long as the import stayed pending.
mara picked option (a) on #5293: "a, removal of the old path as a follow
up in 1w".
hive-c0re now writes each agent's entry from
swarm-agent-permissions.json into the agent's runtime dir as
swarm-permissions.json (/run/hive in the container), together with
whether the import is still pending. It writes the file at every start
(write_dropins) and after every 30 s pass of the permissions worker. The
harness and the subagent daemon hold that stored list until their own
first read succeeds. While the import is pending, an unset key keeps
the stored list rather than reverting it to the default. A queue that
is down never blocks a start: the agent runs on the stored grant.
The decision lives in swarm_queue_client::agent_permissions::HiveCopy,
shared by both readers.
Part of #5170.
Declaring an agent Destroyed now deletes its `agent-permissions` key,
next to the queue-credential revoke and with the same failure handling:
logged at error, the destroy goes ahead, and declaring it destroyed
again re-runs it. Agent names are reusable after a destroy, and a create
left on the default stores no key, so the old key handed a new agent of
the same name the destroyed agent's grant (argus on #5293).
Also: migrate.rs's create-time-setup note named ruth's tool-group seed
in `ensure_root_agent`, which this PR deletes; it now says she holds the
code-constant default when the swarm sets nothing.
Part of #5170.
mara on #5170: "dont split caps and perms. its all perms. / dont include
the now empty tool groups / nothing set -> default / also add perms to
agent creation screen".
- hive-sh4re: one `Permission` enum (messaging, meta, inbox, execution,
web_tools, manage_root_agent) replaces `ToolGroup` and `Capability`;
`lifecycle`/`forge` are gone. `Permission::default_for` is the default
for an agent the swarm sets nothing for.
- The record is `{ "permissions": [...] }`. Missing key, unset field or
no successful read yet = default; `[]` = none; a failed read after a
good one keeps the last value.
- hive-agent reads its own key every 10s and builds each turn's --tools,
--allowedTools and MCP config (rewritten before every turn) from it;
the subagent daemon reads it on each start/continue. Agents get a
read-only grant on their own key.
- hive-c0re restarts an agent only when its manage_root_agent changes.
The import now merges meta/capabilities.json and meta/tool-groups.json
into one list per agent and deletes both; the "import pending, don't
read" decision is `ImportOutcome::read_allowed`, table-tested.
- swarm-controller: `GET /api/permissions` (names + default) and an
optional `permissions` on `POST /api/agents`, stored before the job is
queued. swarm-ui's create-agent form gets a permissions field.
- Deleted: HIVE_TOOL_GROUPS and its forward to the subagent daemon,
tool_groups.rs, ruth's tool-group seed, the permissions rebuild job
(PermPayload/WritePermFile/perm_change), the dashboard permissions tab
and its stale-entries panel.
Part of #5170.
An agent's capabilities move from the hive's meta repo
(`meta/capabilities.json`, injected as `HIVE_CAPABILITIES`) into the
`capabilities` field of its key in a new `agent-permissions` KV bucket,
which swarm-controller alone writes.
- swarm-queue-client: `agent_permissions` (bucket, key, `AgentPermissions`,
direct-get read, the import subject and its wire types).
- swarm-controller: creates the bucket at start; `GET|PUT|DELETE
/api/agents/{name}/permissions` (deny_unknown_fields and unknown
capability ⇒ 422, duplicate ⇒ 400, agent must be declared by a hive);
answers each hive's one-shot import, writing a key only where there is
none and only for agents that hive's wanted state declares.
- swarmctl: `agent permissions get|set|clear`.
- swarm-nats-auth: a hive reads every key of the bucket and sends its
import on its own subject; the controller subscribes to the imports and
may answer them (`responses`).
- hive-c0re: reads each of its agents' keys every 30s into
/var/lib/hyperhive/swarm-agent-permissions.json and restarts an agent,
gracefully, when its capabilities change. Unset is the compiled-in
default (ruth: manage_root_agent; everyone else: none). A failed read
keeps the stored value. On first boot it seeds that file from
meta/capabilities.json, sends the grants to the controller, and deletes
the file once the controller answers.
Deleted: the capabilities.json reader/writer, `HIVE_CAPABILITIES` in the
rendered meta flake, ruth's capability seed, the capabilities half of the
permissions rebuild job (`PermPayload::Capabilities`/`Combined`), the
dashboard's capabilities table and `capabilities_changed` event, and the
now-unused `Capability::description`.
Part of #5170.
network.md listed matrix among the shared-netns containers and the
private-netns list named only agents and the CI runner; it now says
every privateNetwork container keeps its own firewall. The authelia
module no longer calls the matrix container shared, and the hive-c0re
comment on having no homeserver fallback no longer names port 8008.
Part of #4815.
The hive no longer sets an agent's CPU or memory cap: caps come from the swarm, else the hive-wide defaults. The container load tab was the only hive UI that set them, and its figures are already exported as OTEL metrics, so with the tab gone nothing wrote meta/resource-limits.json.
Removed: the file's reader and writer, the `hivectl agent set-limits` verb with its host-socket request, the `GET /api/container-resources` and `POST /api/resource-limits/{name}` dashboard endpoints, and the `cpu_quota`/`memory_max` fields of the container view that only the tab read. A leftover resource-limits.json is ignored.
hive-c0re (`hive-<name>`), swarm-controller and swarm-review-classifier
read their queue client secret from the store once and held it as
`ClientSecret::Value` for the life of the process. After authelia
re-minted a secret and swarm-secret-publish stored the new one, every
later token mint presented the old value and was refused until the
daemon restarted.
`ClientSecret::Stored` replaces `Value`: a `StoredSecret` holds the
secret in memory with a caller-supplied read callback, so the crate
takes no store dependency. When the token endpoint answers 400 or 401,
`mint_token` (and its blocking sibling, used by the controller's OTLP
exporters) re-reads it and, if the store holds a different secret,
mints once more with it. One re-read runs at a time and is spawned so
it outlives a caller that gives up. A re-read that fails or finds the
refused value delays the next one, 5 s doubling to 5 min, so a secret
that stays wrong costs one store read per delay. Logs name the client
id and never the secret.
swarm-nats-auth's `oidc_secret` was the template; its re-read machinery
now sits on `StoredSecret`, so the tree has one copy. The responder
gains the same re-read backoff.
The controller keeps its `IDENTITY` OnceLock: it now holds a
`QueueConfig` whose secret is re-read, and the lazily built vcs-metrics
exporter reads the identity from it.
agent_renewal.rs's module doc said a re-minted agent queue secret only
reaches the agent at its next start; hive-agent reads the store on every
connection attempt after its first, so the doc now says that.
Part of #5017 (slice Q).
Scheduled prompts live at swarm level (swarm-controller's
/api/schedules, `swarmctl schedule`, the swarm UI's /schedules page).
The hive dashboard's SCH3DUL3S tab only listed the rows left in
hive-c0re's `scheduled_prompts` table so operators could copy them
over; the operator confirmed everything is migrated.
Removed:
- the SCH3DUL3S tab, its pane, schedules.js, its CSS (including the
`.rqe-source*` rules, whose only emitter was schedules.js) and the
hub tile's "schedules" entry
- hive-c0re's GET /api/schedules and the `scheduled_prompts` store
(with its v1 column migration and test)
- hive-sh4re's `schedule` wire types, which only that route used
- docs describing the tab, the route and the two tables
The rebuild-queue cancel route that shared the module moves to
dashboard/rebuild_queue.rs under an OpenAPI tag of its own.
The two sqlite tables are not dropped: nothing opens them any more,
and persistence.md says they can be dropped by hand.
Closes#4916
Every 30 seconds `workers::swarm_limits` reads the `agent-limits` key of
each agent this hive has and stores the result in
swarm-resource-limits.json, where the drop-in, the heap ceiling and the
dashboard read it. A cap therefore follows its agent to whichever hive
runs it.
Each value goes through the hive's own validate_cpu_quota /
validate_memory_max before it is stored, since hive-priv renders it
verbatim into the container's drop-in, and one bad value refuses the whole
set (argus on #4268, carried over from the wanted-state consumer this
replaces). A failed read, or a bucket that does not answer, leaves the
stored caps as they are; three failures in a row raise a banner.
swarm-nats-auth grants every hive `$JS.API.DIRECT.GET.KV_agent-limits.>`:
read-only, and every agent's key, not just the hive's own. Scoping it to
the hive's agents would need a roster in the auth responder, which
policy.rs argues against. mara chose this on #4268 (c95293); narrowing it
is a possible low-priority follow-up, not planned. A test pins that the
grant reads every key, writes none, and reaches no other bucket.
Contributes to #3865.
mara's ruling: "swarm level overrides replace the hive ui limits. otherwise
dont change the logic."
swarm value present -> it is the value; nothing hive-side is consulted
swarm value absent -> exactly today's chain: per-agent field, else hive
Per field, so a swarm memory ceiling leaves CPU on the hive's chain.
The fallback chain itself is not touched: effective_from_with_swarm calls
effective_from as it was and lets the swarm replace its result, and
effective_with_swarm delegates to effective, so there stays one place the
chain lives. `an_empty_swarm_map_leaves_the_existing_chain_bit_for_bit`
asserts the wrapper is a no-op across every shape the chain distinguishes.
The swarm's caps live in their own swarm-resource-limits.json, not in the
operator's resource-limits.json: different writers, different lifetimes,
and a swarm write into the operator's file would make "reset to hive
defaults" destroy something the operator never set. It is read and written
through the same read_map / write_map, so an unreadable file is an error,
and write_dropins resolves both files through limits_to_apply, whose
keep-the-last-applied-drop-in policy covers the swarm file too.
stage_limits hands limits_to_apply the swarm caps file too, so the
agent's memory-max-bytes copy, which it sizes its heap and subagents
against, is the MemoryMax= systemd enforces: the swarm cap when there is
one.
Nothing writes swarm-resource-limits.json yet; the reader comes with the
swarm's agent-limits bucket later in this series.
`parse_bytes` knew only K/M/G/T, in either case. A size with the bare
`B` unit (`1048576B`), which `validate_memory_max` stores and systemd
enforces, became `infinity` in the agent's cap file: the cgroup was
capped while the agent was told there was no cap. It now takes exactly
the single-term forms systemd's `parse_size` does: no suffix, `B`, or
K/M/G/T/P/E, case-sensitive. Lowercase units and `4GB`, which systemd
refuses and so leaves the unit uncapped, read as `infinity` too.
A test runs every suffix form the validator accepts through it and
checks the stored value parses to the right byte count.
Part of #5081 (slice S0-2).
The cap file was removed for a cap of `infinity` or a RAM percentage,
so the boot check warned on every start of such an agent, for a
legitimate config. The file is now written on every start:
- a size: its byte count, as before;
- `infinity`: the literal `infinity`. The generators set no JSC heap
ceiling and no subagent MemoryHigh=, and the boot check is quiet;
- a percentage: resolved on the host the way systemd resolves
MemoryMax=N% for the container@ unit. That is permyriad (at most two
decimals, at most 100%) of sysconf(_SC_PHYS_PAGES) *
sysconf(_SC_PAGESIZE), rounded down to a page;
- a value systemd ignores (zero, over 100%, more than two decimals,
unparseable) leaves the unit uncapped, so it is `infinity`.
The file is missing only when hive-c0re can't tell the cap: the
limits file and the kept drop-in are both unreadable, or a percentage
meets an unknown host memory size. The boot check now warns only for
a missing file or a first line that is neither a byte count nor
`infinity`.
Part of #5081 (slice S0-2).
When hive-c0re can't read resource-limits.json and a limits drop-in
already exists, it keeps the drop-in, but it wrote no memory cap file. A
container whose runtime dir had no file yet (hive-c0re upgraded, /run
not cleared) then started with no heap ceiling and no subagent
MemoryHigh=, silently. `stage_limits` now writes the file on every
call: from the new limits, or from the last `MemoryMax=` in the kept
drop-in (`infinity` when it has none or can't be read).
A missing or malformed cap file at boot is no longer silent. The
generators run before the container's journal and an nspawn container
has no /dev/kmsg, so a oneshot `hyperhive-memory-cap-check.service`
logs a warning naming the path. The agent then runs with no JSC heap
ceiling and no subagent MemoryHigh=; the container's MemoryMax= still
applies.
module-eval-agent-memory gains a case pinning how the ceiling reaches
claude: `hive-agent` and `hive-subagent-daemon` neither set nor unset
BUN_JSC_forceRAMSize, both generators and the check unit are installed.
Part of #5081 (slice S0-2).
An agent's memory cap was rendered into its flake (`memoryMaxBytes` →
`services.hyperhive.agent.claudeMemoryMaxBytes`), so the closure depended
on it and a changed cap reached the JSC heap ceiling and the subagent
`MemoryHigh=` only after a rebuild.
hive-c0re now writes the effective `MemoryMax=` in bytes to the agent's
runtime dir (`/run/hive/memory-max-bytes` inside) in `write_dropins`,
from the same value the drop-in gets. The file is removed for
`infinity` or a RAM percentage, and left alone when the drop-in is kept.
Inside the container, `nix/agent-modules/memory-cap.nix` reads it at
boot: an environment generator sets `BUN_JSC_forceRAMSize` (75%) for
every unit and `machinectl shell`, `/etc/set-environment` exports it in
login shells, and a unit generator writes `MemoryHigh=` (2/3) as a
drop-in for `hive-subagent-daemon`.
The render drops `memoryMaxBytes`, the agent option is removed (both
spellings fail eval with a removal message), and
`effective_memory_bytes_from` goes with its only caller.
Part of #5081 (slice S0-2).
Part of #5081 (slice S0-1a). An agent's closure no longer depends on the
name or domain of the hive that renders it.
- hive-priv writes /etc/hyperhive-hive-facts (HYPERHIVE_HIVE_NAME,
HYPERHIVE_HIVE_DOMAIN) into the container from the same WriteNspawnFlags
call that writes /etc/hyperhive-bridge-dns. hive-c0re passes the values
from its own unit env. hive-priv refuses a value outside [A-Za-z0-9._-].
- A systemd environment generator in the agent (hive-facts.nix) loads the
file into the container manager's environment, so every unit sees it,
as with the systemd.globalEnvironment entries the render used to emit.
It also builds CLAUDE_REMOTE_CONTROL_SESSION_NAME_PREFIX
(<hive>-<agent>), which left claude's managed settings.
- meta.rs stops forwarding HYPERHIVE_HIVE_{NAME,DOMAIN} and stops setting
services.hyperhive.agent.hiveName. The option is removed (both
spellings now fail with a removal message).
- otel.nix drops the agent's hive= resource label. The swarm collector
upserts hive per authenticated receiver (swarm-otel.nix resource/<h>,
on both the metrics and logs pipelines), so stored series keep it.
The otel first hop, otel enable and the dashboard port are still baked;
they are S0-1b.
An agent with no matrix account has no `mcp__matrix__*` tools, so a
refusal that only says "use the matrix MCP tools" points it at something
it cannot call. `OPERATOR_SEND_REFUSAL` now names matrix for an agent
that has it, and tells one without it that there is no direct channel:
the operator reads its `set_status` line, its turn output on the
dashboard, and its logs. The allow-list refusal, the `send` tool
description, the MCP server instructions and the system prompt say
"over matrix if you have it" to match, and the helper-event bullets go
back to "ask the operator" without naming a channel.
Agents reach the operator over matrix now (#5115). A `send` to
`operator` is refused, by the broker and by the MCP allow-list check,
with an error that names the matrix MCP tools. The dashboard's Y3R C4LL
tab goes with it: the operator inbox, `GET /api/operator-inbox`,
`Broker::unread_for_recipient`, and the browser notifications that only
ever fired on operator-bound messages.
The harness no longer posts turn failures and plugin-install failures
to the operator inbox. Both are already logged at warn; a new Grafana
rule, `hh-agent-turn-failed`, fires per agent on the harness's
`turn failed` line.
Dashboard-to-agent messaging (op-send, the agent web UI's message box,
mark-all-read for agent inboxes) is unchanged.
Decisions per mara on #5115: q1 a, q2 a plus a grafana alert, q3 keep
dashboard-to-agent messaging and leave swarm-level code alone.
Logs live at swarm level now (VictoriaLogs, read through Grafana
Explore). The hive dashboard's own journal viewer goes, with
everything that existed only to serve it:
- frontend: /logs.html, logs.js, logs.css, the H0M3 "Logs" tile and
the per-agent menu's "journal logs ->" link. The build-log list
rules BU1LDS used from logs.css move into builds.css.
- hive-c0re: GET /api/journal/{name} and GET /api/journal-host, and
priv_client::read_container_journal.
- hive-priv / hive-priv-sock: the ReadContainerJournal request, its
JournalQuery/JournalOutput wire types and the journalctl -M executor.
- nix: hive-c0re's systemd-journal supplementary group, whose only
reader was the journal-host handler.
- docs: the L0GS section, the API entry and the security table row.
Closes#5113Closes#3819
The tokio socket stays non-blocking after into_std, and the flag is
shared with hive-priv through SCM_RIGHTS, so btrfs send wrote into a
non-blocking socket.
A build_logs row is opened with finished_at NULL and closed only by the
process that runs the build. If hive-c0re stopped in between, the row stayed
open for good: the dashboard listed it with no status, its log stream never
sent `done`, and the retention sweep, which skips open rows, never deleted it.
Coordinator::open now closes every open row as `fail` and appends a line
saying hive-c0re stopped. It runs before this process starts any build, and
only there: BuildLogs::open itself leaves rows alone so a second opener can't
close another process's live rows.
The per-agent web UI no longer sets the model: the `/model` slash
command, the model picker, `POST /api/model`, `Bus::set_model` and the
`hyperhive-model` writer are gone. The model chip is display-only and
shows where the model comes from (`model_source` in `/api/state`). The
model is set on the swarm (swarm UI agents page, `swarmctl agent
inference set`).
The read side is unchanged: with no swarm value an agent runs its
agent.nix model, else an existing `hyperhive-model` file, else haiku.
Existing files are not touched.
With the picker gone, its model list goes too: `available_models` in
`/api/state`, the ACP model-list filter, and the harness's global
`HIVE_AVAILABLE_MODELS`. The subagent daemon keeps its own
`HIVE_AVAILABLE_MODELS` from mcp.nix, and the `availableModels`
assertion stays.
`/effort` (command, picker, route, file) is unchanged.
Refs #5034
config-changes.md § Meta flake, hive-c0re nix comments and the meta.rs/exec.rs
doc comments still described the declared agent-<n> input as a forge-hosted
git+http repo; meta.rs renders git+file://<applied>.
run_meta_lock relocked each cascade agent's `agent-<name>` input and only
then fast-forwarded `applied/<name>/main` to the forge config main. The
declared input has been the applied mirror (`git+file://<applied>`) since
b9cef950, so the relock pinned the mirror's old head; the cascade's
rebuilds run with `relock = false` and build that lock. An agent whose
mirror was behind forge main was redeployed on its old config, and the
mirror was then moved to the new head, claiming the agent current.
Fast-forward first, then relock. The fast-forward stays best-effort per
agent: a failed one logs a warn and that agent is relocked against
whatever its mirror has. The two steps move into catch_up_cascade_agents,
which takes them as injected effects (the advance_applied_main pattern in
actions.rs) so the order is unit-tested without nix or a forge.
The stale comment claiming the relock ran against "the forge URL" is
replaced by the actual constraint on the helper's doc.
Closes#5090
hive-c0re publishes this hive's status to the swarm queue as the OIDC
client `hive-<name>`. Its secret came from
`deploy.hive-controller.statusPublish.clientSecretFile`, which defaulted
to authelia's minted file only on a host running both authelia and the
queue. Every other hive had no secret and never published, so the
controller showed it `never_reported`.
Now `swarm-secret-publish`, beside authelia, also copies each hive's
`hive-<name>` secret to `swarm/hives/<hive>/oidc/client`. Its policy
already allows `swarm/hives/*`. hive-c0re reads that path under the
hive's own store leaf, which the existing `swarm/hives/<hive>/*` grant
covers, and holds the value in memory.
The shared queue client no longer remembers a failed first connect for
the life of the process. A failed attempt is retried with a backoff
from 5s, doubling to a cap of 5 minutes; the dashboard banner stays up
until an attempt succeeds. The two status publishers wait for the
client instead of giving up on the first `None`, so a secret published
after boot is picked up without a restart.
Removed: the `statusPublish.clientSecretFile` option (both spellings,
now removed options with a message), its same-host default, its
LoadCredential, the assertion tying it to the other two coordinates,
and `swarm_queue_client::QueueConfig::from_env`, whose only caller was
this read. Publishing is now on wherever the queue URL and token
endpoint are set and the hive holds a store leaf.
Refs #5015
advance_applied_main refused every rev that does not descend from
applied/main, including an ancestor of it. Ancestors arrive in normal
operation: swarm-controller queues each merge's TriggerDeploy as an
independent node with no resource or edge between them and spawns each
runnable node on its own task, so two merges of one agent can publish in
either order; the meta-update cascade fast-forwards applied/main to the
forge's main on its own; and the webhook handler does not dedup a
redelivered merge event. Since a refusal now logs at ERROR and fires the
`hh-config-rev-refused` alert, each of those would page as a refusal.
An ancestor is now RevAdvance::Superseded, logged at info, nothing queued.
Only a rev that has diverged (neither descendant nor ancestor) is refused.
Refs #4851
A deploy request whose rev hive-c0re refuses (fetch failed, or the rev
does not descend from applied/main) no longer tries to comment on the PR
that merged it. Off the forge host that attempt always failed with "forge
core token absent". The refusal now logs at ERROR, message unchanged, and
the new `hh-config-rev-refused` Grafana rule fires on it.
Deleted with the posting: actions::post_rev_deploy_failure_to_pr, the
whole forge/pr_comment.rs (config_repo, merged_pr_for_commit,
post_pr_comment), and ReaderToken::value, whose only caller was
merged_pr_for_commit.
Refs #4851
The htpasswd test now seeds the temp path at 0600, so only the explicit
chmod on the temp yields 0644. The wg test blocks the temp path with a
directory and asserts the write fails with the existing key untouched,
which an in-place write cannot satisfy.
Each of these wrote its file in place (or set the mode after the
write), so a write cut short by a kill or a full disk left a partial
file behind, and some secrets existed for a moment at umask mode:
- swarm-authelia/swarm-grafana/hive-forge/swarm-bao generators: a
partial file passed the `-s`/`-e` guard and was kept forever. They now
capture the value first and land it with `atomic_write_secret`.
- swarm-controller webhook secret: a truncated file failed the 64-hex
check and the secret was regenerated, out of step with the forge
hooks. It is now written 0600 to a sibling temp, fsynced, renamed.
- hive-c0re htpasswd: the temp is now fsynced and set 0644 before the
rename, like the sibling agents.conf writer, instead of relying on
c0re's umask.
- hivectl wg init: the private key is created 0400 in a temp and
renamed, instead of written at umask mode and chmod'ed after.
Closes#5068
