When the server answers an event stream with an error status the browser
gives up and the badge stayed on disconnected with nothing to press. The
terminal, its state header and the messages page now offer a reconnect,
and the one rule for the state after an error moved into a tested helper.
The resource caps panel gets a retry beside its error, and its loading
state announces itself.
The frost variable was defined only in the removed flow stylesheet, so its
fallback always applied. The messages page header no longer points at the
flow page.
appendLinkified had one caller, the flow page, and it pulled in the
path-link and file-preview chain, the side-panel singleton, the marked
and DOMPurify wiring and the css only they used. The docs stop
describing the dashboard side panel and the client reading file_refs.
The flow page showed the raw broker message stream and had a compose box.
This removes the page and its bundle, its link in the pages menu, and the
styles only it used.
The history endpoint that backfilled it and the operator-send endpoint
behind the compose box had no other caller, so they go too, along with
the broker query behind the history endpoint. The stream endpoint stays:
the dashboard tabs still subscribe to it.
The docs lose the FL0W section and the references to the two endpoints.
The domain column showed a dash unless a hive had a dashboard but sorted
and filtered on the domain alone, so rows looked mis-sorted. It now shows
the domain as text when there is no dashboard to link. An empty hive
roster says so. The schedule form's agent names reload with the schedules
and the form says when that load failed.
Each polling page repeated its own fetch-and-set code on a fixed timer,
so a slow answer could be overtaken by the next tick, an older response
could overwrite a newer one, and nothing aborted a request when the page
went away.
usePolled skips a tick while a request is in flight, aborts on unmount
or refresh, ignores answers from dropped requests, and keeps the last
good data under an error. The alerts, hives, agents, schedules, builds,
review runs and broadcast pages and the subagent list use it.
The helpers take the active element and body as arguments, so the cases
(focus into the box, keep a control that took focus, restore only when
focus was lost, find the trigger) run under node's test runner.
Opening a popover or a table filter now moves focus into it, closing one
that left focus on nothing puts it back on the trigger, and the triggers
carry aria-haspopup and aria-controls. The shared Popover covers every
caller; the table filter popover, which has its own portal, does the
same.
A failed report dropped its error under the previous repo's rows, the
repo list and the report shared one error slot, a remembered repo that
the list lacked left the select on all repos, and the report URL did not
encode the repo path. Each request now has its own error, a failed report
clears the rows, the remembered repo keeps an option, and the path parts
are encoded.
Inference, resource caps and linked accounts showed a failed read as a
badge with the reason in a hover title, which keyboard and touch users
cannot read. They now use ApiErrorPanel, and a list that already loaded
stays on screen under a failed refetch.
The success line of both link forms read the live text field, so editing
the name after a link changed the sentence. The result now carries the
name that was sent.
The matrix form held the typed token and password after a failed submit,
and kept them across a switch of credential mode. It now drops them when
the request ends and when the mode changes.
The linked-accounts list and the delete dialog said forgejo where the
link menu and forms say forge; they now say forge.
The running line is a live region whose text changed every second, so a
screen reader announced the counter again each time. The sentence is now
stable and the elapsed seconds sit outside it.
The run and open-a-PR buttons point at the hint that says why they are
off, and add-a-classification says why it is off at the cap.
The dashboard's top-of-page warning banner is gone. The warning registry
stays, because /health/ready, the swarm status view and the OTEL gauges
read it. What it feeds is now alerted on in Grafana:
- hyperhive.hive.warning{kind,level}: one series per raised warning, so an
alert names the cause. Raising a warning also logs one `hive warning
raised` line with the message.
- hyperhive.hive.nix_store.utilization: the used fraction of the nix
store's filesystem, probed in the gauge callback.
- Alerts: hh-hive-degraded on the existing degraded gauge, hh-hive-warning
per kind (disk excluded), hh-host-disk-high at 85% and
hh-host-disk-critical at 95%.
- pending_logins is now a registry warning, refreshed from the container
rescan, so it reaches the per-kind gauge.
Frontend: server_warnings leaves the state snapshot, and the dashboard,
flow and stats pages keep only the sticky chrome wrapper. The shared
hive-warn and WarnBanner components stay, since other views use them.
A module-eval case checks each alert's metric name against the exporter's
source, so a rename on either side fails the build.
At the 2000-message cap the count stops changing, so the page stopped
following the newest message, and every row's index key shifted on each
arrival, remounting all of them. Each message now gets an id when it
arrives; the rows key on it and the scroll follows the newest id. Rows
are memoised on the message, and the events of one frame join the list
in a single update.
/messages reads GET /api/messages/stream. A history select picks the window
(live only up to 24 hours) and a filter keeps the messages whose sender or
recipient contains the text. Each message is a row of the terminal list an
agent's terminal uses: one summary line with the time, the two parties and
the start of the body, and the whole body under it. The list follows the
newest message and holds the last 2000.
The feed has no event id, so a reconnect sends the history again. The page
empties its list each time the connection opens and fills it from the
replay, where the terminal stream hook, which keeps its rows across a
reconnect, would list every message twice.
The stream URL, filter, cap and row logic is in its own module with tests,
and docs/swarm/ui.md describes the page.
The refusal sat inside the collapsed section, and the general error panel
hides while a refusal is set, so a refused submit with the section closed
showed nothing. The refusal now renders under the section, outside the
details element.
The form gets a collapsed "instructions" section with a plain text box. Its
text goes in the optional agents_md field of the create request, and is left
out while the box is empty or only whitespace. The controller's size refusal
shows under the box instead of in the form's general error panel. The text
box empties after a successful create.
The send and refusal logic sits in its own module with tests, and
docs/swarm/ui.md describes the field.
no behaviour change: a pure move of items and tests into new modules, plus
visibility edits (pub(crate)) and path updates in sibling modules that named
crate-root items. same routes, same OpenAPI, 561 tests before and after.
why: #5470, new features stop landing in one 6.4k-line file by default.
files outside swarm-controller/src: docs/agent-lifecycle/agent-roster.md,
swarm-ui JobsPage.tsx and AgentsPage.tsx, nix/host-modules/swarm-controller.nix
and swarm-grafana.nix hold comments that named main.rs for items that moved.
The page opens on the firing ones. The button lists every instance again,
with the state filter and the tones back, so the table's filtering is
visible. The saved-filters key goes back to its original name, since the
state column is a filter again.
The firing-only filter and the helpers beside it move out of the page
component into a plain module, with tests for the state match, the
never-active time and the row key.
The state column stopped being a filter, so a saved "not Pending" selection
under the old key would hide every row. A new key makes the page ignore it.
The page listed every non-normal instance. It now keeps the ones in the
Alerting state and links to Grafana's alert-groups view for the pending,
no-data and error ones.
The instructions row of the agent detail panel gets an edit button that
opens the agent's AGENTS.md, as the harness last published it, in a text
box. Save sends a unified diff against the revision that was loaded; when
the agent changed the file meanwhile the editor keeps the operator's text,
shows the agent's version and offers to save over it or take it. An unsaved
edit survives closing the dialog.
The diff is built in the browser (LCS over lines, three lines of context,
git's no-newline marker) and was checked against git apply on 600 random
before/after pairs.
Pick agents from a grid of their icons (running or all), type the text, send.
The page posts the names and the text to the controller and shows what
happened to each agent, with a retry that selects just the ones that failed.
The selection rules and the controller's answer are read by plain functions
with tests.
Claude Code (>= 2.1.277) and opencode both read AGENTS.md, but Claude
Code reads it only when no CLAUDE.md exists in its cwd or above. So
this is a plain rename with no CLAUDE.md stub left behind.
- hive-agent/src/agents_md_migrate.rs: new. At harness start, before
the first turn, renames state/CLAUDE.md to state/AGENTS.md when only
the former exists; logs an error naming both paths when both exist
and touches neither; does nothing otherwise. Idempotent.
- hive-agent/src/main.rs: calls it in serve_main; checkpoint prompt
and a comment name AGENTS.md.
- hive-agent/src/claude_md_watch.rs: the size watch reads AGENTS.md;
todo text, doc comments and tests follow. Module name, todo
subsystem key ("claude_md") and metric name
(hyperhive.agent.claude_md.lines) are unchanged so existing todo
rows and dashboard history carry over.
- hive-agent/src/turn.rs, hive-agent/prompts/system.md: prompts tell
the agent its file is AGENTS.md.
- hive-agent/src/{otel_turn_metrics,stats}.rs,
frontend/packages/agent/src/stats.js, hive-subagent-mcp/src/*.rs:
comments and a tool parameter description naming the agent's file.
- nix/host-modules/swarm-grafana/dashboards/agents.json: panel title
and description.
- claude-plugins skills claude-subagents, state-hygiene: they mean the
agent's own state file.
- CLAUDE.md -> AGENTS.md at the repo root; docs/crates/README.md link
(checked by check-doc-refs.sh), hive-c0re/README.md,
.prettierignore and the nix/sources.nix comment follow.
- docs/: every prose mention of the agent's file; persistence.md
documents the boot-time rename, claude-invocation.md the shadowing.
Fixes#5509
An N running subagents badge opens a list of the agent's subagents, each a
link to its terminal, so you can switch without going back to the agents page.
A subagent counts as running when it published a row in the last 15 minutes;
the quiet ones are listed below it, dimmed. The list under the preview and the
menu now share one fetch hook and one definition of running.
/builds lists the builder's recent builds newest first, one card each with how
it ended, and opens a failed build's nix tail. /builds?run=<id> opens that
build's card and scrolls to it. The swarm-builder commit status now links
there instead of to the raw JSON record.
The composer's suggestion list stayed open for as long as the line started
with a name that matched an agent, so typing "@iris hello" left it showing.
Enter then accepted the highlighted suggestion (a no-op once the name is
complete) and returned without sending; the message only went on a second
Enter. The list now shows only while the cursor is still inside the leading
@-token, so Enter sends as soon as the message has started.
The hive reads the agent-archetype key when it provisions and rebuilds an
agent and keeps it in swarm-agent-archetypes.json. For an archetype agent
the meta flake has no agent-<name> input and mkAgent imports
hyperhive.hyperhiveArchetypes.<name>.module; provisioning, rebuilds, the
meta-input cascade, a deploy's rev and the startup migration skip the
config repos. The harness gets HIVE_ARCHETYPE and the system prompt says
the agent has no config repo. The create form sends the picked archetype.
Adds the android-dev built-in.
Refs #5386
A successful create left cpu, memory and inference at the picked
archetype's values under a select reading none. The reset now goes
through pickArchetype(""), the path picking none takes.
Refs #5386
A flake declares agent archetypes in its `hyperhiveArchetypes` output,
`<name> = { module; meta; }`. The hyperhive flake ships `reviewer`
(default permissions without `execution`).
swarm-builder answers `$SWARM.builder.archetypes` with the `meta` of
every archetype its own hyperhive source declares. swarm-controller asks
once the queue connects and every 10 minutes, checks each archetype as
`POST /api/agents` checks its settings, and stores the result in the
`agent-archetypes` KV bucket when it changed. `GET /api/archetypes`
serves it, and the create form's archetype select prefills permissions,
resource caps and inference from it.
The agent created is an ordinary agent with its own config repo; the
archetype's module is not applied yet.
Refs #5386
Permission::default_for and hive-sh4re's MANAGER_AGENT are gone: every
agent with no permissions key holds Permission::DEFAULT, ruth included.
The agent-name parameters that only fed default_for go with it
(permissions::effective, HiveCopy::before_read/after_read and their
callers).
swarm-controller seeds the grant ruth held by name: at start, a declared
ruth whose permissions are unset gets DEFAULT plus manage_root_agent
written into her key, once, logged. A set key is never touched. It is a
one-shot to delete once every swarm has passed it.
The swarm UI setup assistant opens the create form with
manage_root_agent checked, so a new ruth is created with the grant.
permissions_import no longer adds ruth to the import or splits her
default. Docs and help text no longer say ruth holds the grant by
default; swarmctl-cli.md regenerated.
Drop the H0M3 tile hub and the core page. The dashboard is now the index;
kept state is its fifth tab. A pages menu in the chrome links flow, stats,
API docs and the swarm UI. The swarm apex URL comes from
services.hyperhive.swarm.domain via HIVE_SWARM_PUBLIC_URL and the new
swarm_public_url field of the state snapshot.
