remove the hive-c0re forge-credential chain nothing reads any more
With no nix build on the hive, the boot publish of the forge token for nix has no reader. Removes the ForgeSweep node, the token file, the git credential helper and hive-c0re's forge gitconfig sections.
This commit is contained in:
atlas
parent
6b800600e2
commit
221c3f35a1
4 changed files with 69 additions and 310 deletions
|
|
@ -69,14 +69,11 @@ forge container:
|
|||
- seeding `proposed` from `agent-configs/<agent>` on first deploy
|
||||
- cloning and pulling `/knowledge`
|
||||
|
||||
The builds read as the hive's account too. nix fetches the config inputs and
|
||||
`internal/meta` with `git`, and `git` gets its credential from
|
||||
`git-credential-hive-forge`, which reads `/run/hyperhive/forge-hive-token`.
|
||||
hive-c0re writes that file (account on the first line, token on the second)
|
||||
from the hive's store token at each boot and each `internal/meta` read, when its
|
||||
content differs. A hive whose store holds no token has no such file, fetches
|
||||
nothing private through nix and fails its builds: they have no other flake than
|
||||
`internal/meta`. This also holds on a hive with no forge container.
|
||||
The hive builds nothing, so no nix process reads the forge as the hive's
|
||||
account. hive-c0re hands the token to each `git` command it runs
|
||||
(`http.extraHeader`) and keeps no copy on disk. A hive whose store holds no token
|
||||
reads nothing private from the forge. This also holds on a hive with no forge
|
||||
container.
|
||||
|
||||
Roll a change to any of this out store host first (its granter writes the
|
||||
controller's grant on `swarm/hives/+/forge/token`), then the controller host,
|
||||
|
|
|
|||
|
|
@ -72,7 +72,6 @@ Cheap — no build slot:
|
|||
| `SetWanted` | write the durable power intent (`wanted = Up`/`Offline`) as the head node of a power-op DAG. Takes the agent lease even though it's a store write, so the intent write and the tail `Reconcile` are atomic per-agent — two racing power ops can't clobber each other's intent before either reconciles |
|
||||
| `EmitRebuilt` | tail of a rebuild — emit the agent's `Rebuilt` manager event (ok/fail per outcome, nothing on cancel). One node per agent _and_ per outcome |
|
||||
| `WriteDropin` | `set_nspawn_flags` + `set_resource_limits` + daemon-reload |
|
||||
| `ForgeSweep` | one-shot boot-time publish of the hive's forge read token for nix (`forge::ensure_all`) as a first-class node, so it shows as real work on the dashboard instead of running invisibly in a bare `tokio::spawn`. Agentless |
|
||||
| `KnowledgePull` | `/knowledge` pull (`knowledge::pull`): at boot (commits that landed while `hive-c0re` was down), on the swarm knowledge-changed event, and hourly as a fallback. Holds `Resource::KnowledgeTree` (capacity 1), so two pulls never overlap on the working tree; each trigger queues its own pass, which waits for the resource if one is already live. Agentless |
|
||||
| `WantedPull` | pull of the agent set the swarm controller declares for this hive (`wanted::pull`), converging the agents it names. Runs at boot, waiting up to a minute in total for the queue connection, and again after every attach of the wanted-state watch (which retries with a backoff when the attach fails or the stream ends); the deploy event (`swarm_status`) and the watch are the fast path, this repairs a missed one. A first deploy already queued or running for an agent isn't queued again. Agentless |
|
||||
|
||||
|
|
|
|||
|
|
@ -156,7 +156,7 @@ pieces fit, and the reasoning behind them, is in [`credentials.md`](credentials.
|
|||
| the cache's public key and pull token, for hive-priv | `swarm-controller` copies them to `swarm/hives/<hive>/attic/{public-key,pull-token}` (see the cache-facts row above) | `hive-priv-cache-facts` (root) reads those two under the hive's own store identity every ten minutes and writes `/run/hyperhive-priv/attic/public-key` and `netrc` (tmpfs, root, each `0600`, directory `0700`); the cache's address comes from `services.hyperhive.swarm.attic.domain` and `cache`, not from the store. A store that holds no facts, or that doesn't answer, leaves the files as they stand, and a hive that never got them has `hive-priv` answer `not available`. |
|
||||
| the forge's copy of its OIDC secret | `swarm-bao-forge-oidc.service` reads it out of the swarm secret store under the forge publisher's leaf, wherever authelia runs | `/run/hive-forge-oidc/<id>.secret` on the host (tmpfs), bound into the forge container, handed to `forgejo-sso-source` through `LoadCredential` |
|
||||
| the homeserver's copy of its OIDC secret | `swarm-bao-matrix-oidc.service` reads it out of the swarm secret store under matrix-ctl's leaf, wherever authelia runs | `/run/hive-matrix-oidc/<id>.secret` on the host (tmpfs), bound into the homeserver container, handed to tuwunel through `LoadCredential` |
|
||||
| this hive's forge read token | `swarm-controller`, into the secret store at `swarm/hives/<hive>/forge/token`, for the `hive-<hive>` account; a pass at start and every five minutes re-mints a missing or stale token | `hive-c0re` reads it under the hive's own store identity, and copies it (account on the first line, token on the second) to `/run/hyperhive/forge-hive-token` (tmpfs, `0600` `hive-core`) for nix's `git`, which `hive-priv` also runs. Each `internal/meta` read and each boot rewrites the copy when it differs; where they differ after a rotation, a build that starts before the next read fails to authenticate, and a retry reads the new token |
|
||||
| this hive's forge read token | `swarm-controller`, into the secret store at `swarm/hives/<hive>/forge/token`, for the `hive-<hive>` account; a pass at start and every five minutes re-mints a missing or stale token | `hive-c0re` reads it under the hive's own store identity for each forge read, and hands it to the `git` commands it runs. It keeps no copy on disk |
|
||||
| squid's users file | `hive-c0re` (`workers::squid_users`), every 30 seconds, from the proxy credentials of its agents and the self-check | `services.hyperhive.deploy.hive-controller.squid.usersFile` (`/var/lib/hive-squid/users`, `hive-core:squid`, `0640`): `<user>:<hash>` lines, SHA-512 crypt hashes only, renamed into place when it changed. `unrestricted` beside it lists the users whose agent holds the swarm's `unrestricted_internet` flag, names only; it lists every agent the hive never read as off `systemd-tmpfiles` creates it empty so squid's helper never sees a missing file. A hive whose agents have no credential yet (an older controller) has an empty file: every login fails and the self-check reports `ok=false`; an agent without one sends none, so it goes direct |
|
||||
| the squid self-check's password | `swarm-controller` mints `swarm/hives/<hive>/squid-selfcheck`; `squid-selfcheck-credential` (root, every 10 minutes) reads it as the hive | `/run/credstore/hive-squid.selfcheck` (tmpfs, root, `0400`), imported by `squid-selfcheck.service` as a systemd credential and handed to `curl` on its stdin. Both self-check users (`selfcheck.squid` and the always-unrestricted `selfcheck-unrestricted.squid`) use it, so whoever holds it has unrestricted egress through this squid Missing, or different from the users file: the self-check logs `credential=absent` or a 407 and fails, and nothing else breaks |
|
||||
|
||||
|
|
|
|||
|
|
@ -252,34 +252,34 @@ for every operation that genuinely requires root.
|
|||
**Narrow interface** — `PrivRequest` variants map 1:1 to specific
|
||||
known operations; there is no arbitrary command pass-through:
|
||||
|
||||
| Operation | What it runs |
|
||||
| ------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
||||
| `StartContainer` / `StopContainer` | `nixos-container start/stop <name>` |
|
||||
| `KillContainer` | `machinectl kill <machine> --signal=SIGKILL` (`nixos-container` has no kill verb) |
|
||||
| `CreateContainer` / `UpdateContainer` | `nixos-container create <name> --system-path <toplevel>`; for an update, `nix-env -p <profile> --set <toplevel>` and a reload of the unit. `<toplevel>` must be the store path the last successful `RealiseClosure` returned for that agent (in memory, per agent), so hive-c0re can't name a path never realised for the agent; hive-priv builds nothing |
|
||||
| `RealiseClosure` | `nix-store --realise <store_path> --max-jobs 0` against the swarm cache, with the host's configured cache address, and the public key and netrc from root-owned `/run/hyperhive-priv/attic/`, as per-call settings that replace the host's substituters and trusted keys and require a signature. The path must be `/nix/store/<32 chars>-<name>` and the agent name valid. It downloads and never builds |
|
||||
| `DestroyContainer` | `nixos-container destroy <name>` |
|
||||
| `ListContainers` | `nixos-container list` |
|
||||
| `ReloadGatewayNginx` | `systemctl reload/start/reset-failed nginx` (host unit; the unit name is hard-coded, not a parameter) |
|
||||
| `WriteNspawnFlags` | write `/etc/nixos-containers/<container>.conf` (bind-mount list, network isolation vars, and `--ephemeral` after the root's salvage). hive-priv first copies a stopped container's root to the agent's `work/`, then renames it aside (it deletes nothing), following no link the container could have planted |
|
||||
| `EnsureAgentSocketDir` | `mkdirat` `/run/hive-agent/<name>` `0751 root:root` under an `O_NOFOLLOW` parent fd; leaves an existing directory alone, refuses anything else |
|
||||
| `WriteResourceLimits` | write `CPUQuota=`/`MemoryMax=`/`CPUWeight=`/`IOWeight=` systemd drop-in for agent container, with an `ExecStartPre=` that runs `hive-priv check-rootfs <container>` (no-follow check of the root paths the start script touches; see persistence.md), and a GC root on the build it names |
|
||||
| `RemoveServiceDropin` | remove `container@<name>.service.d/` drop-in on destroy, and the GC root of the hive-priv build it named |
|
||||
| `DaemonReload` | `systemctl daemon-reload` |
|
||||
| `ControlInfraContainer` | `systemctl <action> nginx.service` for the gateway — the `InfraContainer` enum is the allowlist, and serde rejects unknown names at the wire boundary (`hive-c0re`, the forge and the matrix have no variant, so no request can name them) |
|
||||
| `SyncAgentTmpfiles` | unlink `/etc/tmpfiles.d/hyperhive-agents.conf` and return `Ok` |
|
||||
| `SetAgentPaused` | create / remove the `<state>/<name>/harness/paused` marker that parks an agent's turn loop |
|
||||
| `EnsureAgentSubvolume` | `btrfs subvolume create <state>/<name>` for a new agent — no-op when the path exists or the filesystem isn't btrfs |
|
||||
| `UpgradeAgentSubvolume` | migrate an existing plain state dir into a subvolume: create, `cp -a --reflink=auto`, atomic swap. Operator opt-in, and the caller stops the agent first |
|
||||
| `DeleteAgentSubvolume` | `btrfs subvolume delete <state>/<name>` — purge path only, never a plain destroy |
|
||||
| `EnsureBtrfsQuota` | `btrfs quota enable <AGENT_STATE_ROOT>`. Operator opt-in — enabling forces a full rescan |
|
||||
| `ReadSubvolumeUsage` | `btrfs qgroup show -f --raw <state>/<name>` |
|
||||
| `SetSubvolumeQuota` | `btrfs qgroup limit <bytes\|none> <state>/<name>` |
|
||||
| `MeasureAgentDisk` | `du -s -x -b -c -P` over `<state>/<name>/state`, `<state>/<name>/work` and `/var/lib/nixos-containers/h-<name>`, killed after 10 min. hive-priv derives the paths from the name; the request carries none |
|
||||
| `SnapshotAgentSubvolume` | `btrfs subvolume snapshot -r <agent_root> <snapshot_path>` — the frozen point-in-time copy a migration streams from |
|
||||
| `DeleteAgentSnapshot` | `btrfs subvolume delete <snapshot_path>` |
|
||||
| `SendAgentSnapshotToFile` | `btrfs send [-p <parent>] <snapshot>` into a bare filename under `MIGRATE_STAGING_ROOT`; refuses to overwrite an existing export |
|
||||
| `SendAgentSnapshotToFd` | `btrfs send [-p <parent>] <snapshot>` into a **file descriptor passed with the request** (`SCM_RIGHTS`). hive-c0re connects to the peer and hands over the connected socket, so hive-priv never learns an address or protocol. hive-priv requires exactly one descriptor here, and refuses one that arrives alongside any other operation |
|
||||
| Operation | What it runs |
|
||||
| ------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
||||
| `StartContainer` / `StopContainer` | `nixos-container start/stop <name>` |
|
||||
| `KillContainer` | `machinectl kill <machine> --signal=SIGKILL` (`nixos-container` has no kill verb) |
|
||||
| `CreateContainer` / `UpdateContainer` | `nixos-container create <name> --system-path <toplevel>`; for an update, `nix-env -p <profile> --set <toplevel>` and a reload of the unit. `<toplevel>` must be the store path the last successful `RealiseClosure` returned for that agent (in memory, per agent), so hive-c0re can't name a path never realised for the agent; hive-priv builds nothing. The binding doesn't mean hive-c0re can't choose the closure: it can still ask hive-priv to download any swarm-signed path for any agent and then apply it. The swarm key and the cache bound that to a cross-assignment risk (one agent gets another's closure), not an arbitrary-path one |
|
||||
| `RealiseClosure` | `nix-store --realise <store_path> --max-jobs 0` against the swarm cache, with the host's configured cache address, and the public key and netrc from root-owned `/run/hyperhive-priv/attic/`, as per-call settings that replace the host's substituters and trusted keys and require a signature. The path must be `/nix/store/<32 chars>-<name>` and the agent name valid. It downloads and never builds |
|
||||
| `DestroyContainer` | `nixos-container destroy <name>` |
|
||||
| `ListContainers` | `nixos-container list` |
|
||||
| `ReloadGatewayNginx` | `systemctl reload/start/reset-failed nginx` (host unit; the unit name is hard-coded, not a parameter) |
|
||||
| `WriteNspawnFlags` | write `/etc/nixos-containers/<container>.conf` (bind-mount list, network isolation vars, and `--ephemeral` after the root's salvage). hive-priv first copies a stopped container's root to the agent's `work/`, then renames it aside (it deletes nothing), following no link the container could have planted |
|
||||
| `EnsureAgentSocketDir` | `mkdirat` `/run/hive-agent/<name>` `0751 root:root` under an `O_NOFOLLOW` parent fd; leaves an existing directory alone, refuses anything else |
|
||||
| `WriteResourceLimits` | write `CPUQuota=`/`MemoryMax=`/`CPUWeight=`/`IOWeight=` systemd drop-in for agent container, with an `ExecStartPre=` that runs `hive-priv check-rootfs <container>` (no-follow check of the root paths the start script touches; see persistence.md), and a GC root on the build it names |
|
||||
| `RemoveServiceDropin` | remove `container@<name>.service.d/` drop-in on destroy, and the GC root of the hive-priv build it named |
|
||||
| `DaemonReload` | `systemctl daemon-reload` |
|
||||
| `ControlInfraContainer` | `systemctl <action> nginx.service` for the gateway — the `InfraContainer` enum is the allowlist, and serde rejects unknown names at the wire boundary (`hive-c0re`, the forge and the matrix have no variant, so no request can name them) |
|
||||
| `SyncAgentTmpfiles` | unlink `/etc/tmpfiles.d/hyperhive-agents.conf` and return `Ok` |
|
||||
| `SetAgentPaused` | create / remove the `<state>/<name>/harness/paused` marker that parks an agent's turn loop |
|
||||
| `EnsureAgentSubvolume` | `btrfs subvolume create <state>/<name>` for a new agent — no-op when the path exists or the filesystem isn't btrfs |
|
||||
| `UpgradeAgentSubvolume` | migrate an existing plain state dir into a subvolume: create, `cp -a --reflink=auto`, atomic swap. Operator opt-in, and the caller stops the agent first |
|
||||
| `DeleteAgentSubvolume` | `btrfs subvolume delete <state>/<name>` — purge path only, never a plain destroy |
|
||||
| `EnsureBtrfsQuota` | `btrfs quota enable <AGENT_STATE_ROOT>`. Operator opt-in — enabling forces a full rescan |
|
||||
| `ReadSubvolumeUsage` | `btrfs qgroup show -f --raw <state>/<name>` |
|
||||
| `SetSubvolumeQuota` | `btrfs qgroup limit <bytes\|none> <state>/<name>` |
|
||||
| `MeasureAgentDisk` | `du -s -x -b -c -P` over `<state>/<name>/state`, `<state>/<name>/work` and `/var/lib/nixos-containers/h-<name>`, killed after 10 min. hive-priv derives the paths from the name; the request carries none |
|
||||
| `SnapshotAgentSubvolume` | `btrfs subvolume snapshot -r <agent_root> <snapshot_path>` — the frozen point-in-time copy a migration streams from |
|
||||
| `DeleteAgentSnapshot` | `btrfs subvolume delete <snapshot_path>` |
|
||||
| `SendAgentSnapshotToFile` | `btrfs send [-p <parent>] <snapshot>` into a bare filename under `MIGRATE_STAGING_ROOT`; refuses to overwrite an existing export |
|
||||
| `SendAgentSnapshotToFd` | `btrfs send [-p <parent>] <snapshot>` into a **file descriptor passed with the request** (`SCM_RIGHTS`). hive-c0re connects to the peer and hands over the connected socket, so hive-priv never learns an address or protocol. hive-priv requires exactly one descriptor here, and refuses one that arrives alongside any other operation |
|
||||
|
||||
**Closures from the swarm cache** — `RealiseClosure` is how a hive's rebuild
|
||||
takes the closure the swarm built instead of building it. Root-owned sources
|
||||
|
|
|
|||
Loading…
Reference in a new issue