every hive runs its otel collector, and agents export to it by default

docs/networking/network.md

@@ -117,8 +117,8 @@ dnsmasq is **authoritative** for the hive's own zone (`<hive-domain>`)
 plus whatever swarm-service names this host contributes via
 `gateway.localNames` — `forge.<swarm-domain>` and `chat.<swarm-domain>`
 (matrix) when this host runs those services, `auth.<swarm-domain>`
-when it runs authelia, and `hive-collector.<swarm-domain>` on every hive
+when it runs authelia, and `hive-collector.hive` on every hive
-with `otel.enable` — answering each with the bridge IP (where nginx
+— answering each with the bridge IP (where nginx
 is reachable, and where the hive's own collector listens). Note forge and
 matrix are swarm-domain names, not sub-domains of `<hive-domain>`: a swarm
 runs one forge and one homeserver, so their names belong to the swarm rather
@@ -182,7 +182,7 @@ By default agents can only reach the host on 80/443 (+53 DNS), so a
 host-side service on another port — for example a dev OTLP collector you want
 agents to reach directly — is unreachable. (hyperhive's own services
 need none of this: a module that means to be reachable from agents opens
-its own port here, which `otel.enable` and `nats.enable` both do. Note
+its own port here, which the hive collector and `nats.enable` both do. Note
 that `otel.endpoint` is the _upstream_, which no agent ever dials. See
 `docs/scheduler/observability.md`.)
 

docs/scheduler/observability.md

@@ -16,15 +16,14 @@ Telemetry crosses two collectors, and which one you configure depends on what
 the host is:
 
 |                                      | runs where     | receives from                     | does                                            |
-| ------------------------------------ | ---------------------- | --------------------------------- | ----------------------------------------------- |
+| ------------------------------------ | -------------- | --------------------------------- | ----------------------------------------------- |
 | **swarm tier** — `deploy.swarm-otel` | once per swarm | every hive's collector            | writes the swarm's stores and exports upstream  |
-| **hive tier** — `otel.enable`        | every hive with agents | that hive's agents, on the bridge | forwards to the swarm tier. Holds no credential |
+| **hive tier** — always on            | every hive     | that hive's agents, on the bridge | forwards to the swarm tier. Holds no credential |
 
 An all-local host runs both; the hop between them configures itself.
 
 ```nix
 services.hyperhive.otel = {
-  enable            = true;
   endpoint          = "https://collector.example.com/otel";  # the upstream
   headersCredential = "/run/secrets/otel-headers";           # only the swarm tier reads it
 };
@@ -32,20 +31,20 @@ services.hyperhive.otel = {
 
 ## Enabling export
 
-`otel.enable` is the single gate on a hive: one switch in the host config
+Every hive runs its collector and every agent exports to it, with nothing to
-covers every agent container on it.
+switch on: there is no per-hive or per-agent opt-in.
 `endpoint` is where telemetry ends up after it leaves the swarm — optional,
 because the swarm's own metrics store (`deploy.victoriametrics`) is a
 destination in its own right. With both, telemetry goes to both. See
 [`swarm/services.md`](../swarm/services.md#metrics-victoriametrics--grafana).
 
 **Telemetry leaves a hive exactly one way: through the collector that
-`enable` starts on the host.** Agents never talk to `endpoint` themselves —
+runs on the host.** Agents never talk to `endpoint` themselves —
 they export unauthenticated to a collector address only their own containers
 can reach. They dial it as
-`http://hive-collector.<swarm domain>:<collector port>`, a name identical on
+`http://hive-collector.hive:4318`, a name identical on
-every hive, which each hive's own dnsmasq answers with its bridge IP, so an
+every hive and every swarm, which each hive's own dnsmasq answers with its bridge IP, so an
-agent's build carries no hive-specific address. The otel module opens that
+agent's build carries no hive-specific address and no swarm domain. The otel module opens that
 port on the bridge itself. That collector forwards to the swarm's
 ([`swarm/services.md`](../swarm/services.md#telemetry-collector-otel)), the
 single process holding the upstream credential and the only writer to the
@@ -170,7 +169,7 @@ a build error naming the reason rather than telemetry silently going nowhere.
 ## Network access
 
 Agent containers reach the host only on ports 80 and 443 (plus DNS). The
-collector port needs nothing from you: `otel.enable` opens it on the bridge.
+collector port needs nothing from you: the hive collector opens it on the bridge.
 To let agents reach some other host-local service of your own →
 [`networking/network.md`](../networking/network.md#reaching-host-services-exposehostports).
 
@@ -180,7 +179,7 @@ The nix module (`nix/host-modules/otel.nix`) generates every
 `services.hyperhive.otel.*` option's full type, default, description and
 example into the [options reference](https://hyperhive.darkest.space/options/)
 (host options — `nix build .#docs-host` for a local render). The same module
-declares the collector port every hive and its agents share,
+fixes the collector port every hive and its agents share,
 `services.hyperhive.swarm.hiveOtel.collectorPort`, and each hive's own
 `services.hyperhive.deploy.hive-controller.otel.extraResourceAttributes`.
 That's the reference; this page covers what a per-option listing can't: the
@@ -296,7 +295,7 @@ cleanly and the affected level button goes on returning zero rows:
 
 <!-- vale write-good.Passive = NO -->
 
-When OTEL is enabled, **hive-c0re itself** also exports each agent
+**hive-c0re itself** also exports each agent
 container's resource load — the same cgroup gauges —
 to this hive's own collector, exactly like an agent does and with
 no separate toggle. These come from the host, not the in-container Claude SDK,
@@ -342,7 +341,7 @@ a crash and `tracing::warn!`s `"container crash detected"` — nothing else:
 no broker event, no per-hive dashboard banner. Both of those used to exist;
 this change removed them in favour of the log line.
 
-When `otel.enable` is on, the hive tier's own collector runs a `journald`
+The hive tier's own collector runs a `journald`
 receiver scoped to `hive-c0re.service` (no bind mount needed — unlike an
 agent's journal, this collector already shares a filesystem with the unit it
 reads, being a host systemd service rather than a container) and forwards
@@ -353,18 +352,13 @@ matches it directly and pages the operator — no agent, and no per-hive
 dashboard, in the loop.
 
 Requires `services.journald.storage = "persistent"` (the NixOS default) on
-every hive host with `otel.enable` set — asserted at eval time.
+every hive host — asserted at eval time.
-
-⚠️ **A hive with `otel.enable` off has no operator-visible crash signal at
-all** — the per-hive dashboard banner this replaces no longer exists, and
-there is no fallback path. Turning on `otel.enable` is what makes a crash
-reach anyone.
 
 ## Agent-emitted per-turn metrics (`hive-agent`)
 
 <!-- vale write-good.Passive = NO -->
 
-When OTEL is enabled, the harness itself (`hive-agent`) exports one small set
+The harness itself (`hive-agent`) exports one small set
 of metrics per claude turn, recorded the moment the turn ends (not polled).
 These are deliberately the fields Claude Code's own built-in export (see
 above) can't know about — the harness's own wall-clock timing, what woke the
@@ -508,8 +502,7 @@ and the start of the response body. It repeats a persisting failure every
 ## Agent-emitted custom metrics (`hive-metric`)
 
 Agents can push arbitrary labeled metrics to the same OTEL collector via the
-`hive-metric` CLI tool, available in every agent container when
+`hive-metric` CLI tool, available in every agent container.
-`services.hyperhive.otel.enable = true`.
 
 ### Usage
 
@@ -544,11 +537,11 @@ hive-metric queue_depth 17 --type gauge
 hive-metric api_latency_ms 142.5 --type gauge --labels model=sonnet --labels tier=api
 ```
 
-### Error when OTEL isn't configured
+### Error when an agent turns OTEL off
 
-When `services.hyperhive.otel.enable = false` (the default), the
+An agent whose own config sets `services.hyperhive.agent.otel.enable = false`
-`OTEL_EXPORTER_OTLP_ENDPOINT` env var isn't set and `hive-metric` exits
+has no `OTEL_EXPORTER_OTLP_ENDPOINT` env var, and `hive-metric` exits with an
-with an informative error message. No silently dropped metrics.
+informative error message. No silently dropped metrics.
 
 ### Wire format
 

hive-c0re/src/meta.rs

@@ -561,42 +561,17 @@ fn hive_ca_source() -> Option<String> {
     Some(path)
 }
 
-/// Hive-wide OTEL config injected into every agent's build, read off
+/// Extra `OTEL_RESOURCE_ATTRIBUTES` entries for every agent, read off
-/// hive-c0re's own unit env (set from `services.hyperhive.otel.*`,
+/// hive-c0re's own unit env
-/// `services.hyperhive.swarm.hiveOtel.*` and
+/// (`services.hyperhive.deploy.hive-controller.otel.extraResourceAttributes`).
-/// `services.hyperhive.deploy.hive-controller.otel.*`). A present, non-empty
+/// `None` when unset or empty. This is the only OTEL value the renderer
-/// `HYPERHIVE_OTEL_ENDPOINT` is the enable signal — the host module
+/// writes into the flake: agents export to the hive collector by default and
-/// asserts the endpoint is set whenever `otel.enable` is true, so
+/// find it by name, so there is no enable flag, endpoint or protocol to
-/// "endpoint present" == "OTEL on". The optional fields map to the
+/// carry.
-/// matching host options and are only carried when set.
+fn otel_extra_resource_attributes() -> Option<String> {
-struct OtelConfig {
+    std::env::var("HYPERHIVE_OTEL_EXTRA_RESOURCE_ATTRIBUTES")
-    endpoint: String,
-    protocol: String,
-    extra_resource_attributes: Option<String>,
-}
-
-/// Read the hive-wide OTEL config from env, or `None` when OTEL is off.
-/// Mirrors `hive_ca_source` — host state surfaced to the meta renderer
-/// so it can bake build-time `services.hyperhive.agent.otel.*` config into each agent
-/// (the per-agent options the harness modules consume). Returns `None`
-/// when the endpoint signal is absent so the renderer emits no
-/// `services.hyperhive.agent.otel.*` lines and agents keep the disabled default.
-fn otel_config() -> Option<OtelConfig> {
-    let endpoint = std::env::var("HYPERHIVE_OTEL_ENDPOINT")
-        .ok()
-        .filter(|v| !v.is_empty())?;
-    let protocol = std::env::var("HYPERHIVE_OTEL_PROTOCOL")
         .ok()
         .filter(|v| !v.is_empty())
-        .unwrap_or_else(|| "http/protobuf".to_owned());
-    let extra_resource_attributes = std::env::var("HYPERHIVE_OTEL_EXTRA_RESOURCE_ATTRIBUTES")
-        .ok()
-        .filter(|v| !v.is_empty());
-    Some(OtelConfig {
-        endpoint,
-        protocol,
-        extra_resource_attributes,
-    })
 }
 
 /// The ordered set of CA certs embedded next to the meta flake, as
@@ -907,36 +882,20 @@ fn render_flake(
             ca_refs.join(" ")
         );
     }
-    // Hive-wide OTEL stats export (`services.hyperhive.otel.*`): inject the
+    // Extra OTEL resource labels (`deploy.hive-controller.otel.*`) are the one
-    // build-time `services.hyperhive.agent.otel.*` config the harness modules consume (its
+    // OTEL value rendered here; enablement and the collector endpoint are
-    // otelEnv + otelExecStart wrapper + LoadCredential). Host-driven, so
+    // agent-module defaults.
-    // the same config lands on every agent; emitted only when enabled.
+    if let Some(attrs) = otel_extra_resource_attributes() {
-    // Mirrors the CA-cert injection above — host state -> build-time agent
-    // module config.
-    if let Some(otel) = otel_config() {
         let esc = |s: &str| s.replace('\\', "\\\\").replace('"', "\\\"");
-        out.push_str("              services.hyperhive.agent.otel.enable = true;\n");
-        let _ = writeln!(
-            out,
-            "              services.hyperhive.agent.otel.endpoint = \"{}\";",
-            esc(&otel.endpoint)
-        );
-        let _ = writeln!(
-            out,
-            "              services.hyperhive.agent.otel.protocol = \"{}\";",
-            esc(&otel.protocol)
-        );
-        if let Some(attrs) = &otel.extra_resource_attributes {
         let _ = writeln!(
             out,
             "              services.hyperhive.agent.otel.extraResourceAttributes = \"{}\";",
-                esc(attrs)
+            esc(&attrs)
         );
     }
-    }
     // Agent-facing service URLs (`services.hyperhive.agent.forge.url`, `services.hyperhive.agent.matrix.url`):
     // emit the host's real values as build-time agent config, the same
-    // host-state -> agent-module shape as the otel block above.
+    // host-state -> agent-module shape as the CA block above.
     //
     // These options exist already, but until now *nothing set them*, so every
     // agent silently fell back to their `localhost:<port>` defaults while the
@@ -2140,16 +2099,16 @@ mod tests {
     }
 
     #[test]
-    fn render_flake_injects_otel_when_signalled() {
+    fn render_flake_carries_no_otel_enablement() {
-        // services.hyperhive.otel.* -> HYPERHIVE_OTEL_* on hive-c0re's unit
+        // The agent module defaults otel on and finds the collector by name, so
-        // -> injected as build-time services.hyperhive.agent.otel.* into every agent. With
+        // the flake carries no enable, endpoint or protocol line however the
-        // no endpoint signal, no services.hyperhive.agent.otel lines are emitted (agents
+        // host's OTEL env is set. Only the per-hive resource labels are
-        // keep the the harness modules disabled default).
+        // rendered, and only when set.
         //
         // Serialised against every other env-mutating test in the crate.
-        // `stats::otel_metrics::tests` perturbs HYPERHIVE_OTEL_ENDPOINT too,
+        // `stats::otel_metrics::tests` perturbs OTEL env too, and lands in this
-        // and lands in this same test binary — "no other test asserts on
+        // same test binary — "no other test asserts on these" was true of this
-        // these" was true of this module and false of the process.
+        // module and false of the process.
         let _env = crate::test_env::lock();
         // SAFETY: serialised by the guard above; restored before returning.
         let render = || {
@@ -2165,53 +2124,49 @@ mod tests {
             std::env::set_var("HYPERHIVE_OTEL_ENDPOINT", "https://c.example/otel");
             std::env::set_var("HYPERHIVE_OTEL_PROTOCOL", "grpc");
         }
-        let on_minimal = render();
+        let plain = render();
         unsafe {
             std::env::set_var(
                 "HYPERHIVE_OTEL_EXTRA_RESOURCE_ATTRIBUTES",
                 "deployment.environment=prod",
             );
         }
-        let on_full = render();
+        let labelled = render();
         unsafe {
             std::env::remove_var("HYPERHIVE_OTEL_ENDPOINT");
             std::env::remove_var("HYPERHIVE_OTEL_PROTOCOL");
             std::env::remove_var("HYPERHIVE_OTEL_EXTRA_RESOURCE_ATTRIBUTES");
         }
-        let off = render();
 
+        // Presence control: the render is the real flake, carrying the pin.
         assert!(
-            on_minimal.contains("services.hyperhive.agent.otel.enable = true;"),
+            plain.contains("rev=0123abcd"),
-            "otel enable must be injected:\n{on_minimal}"
+            "the hyperhive pin line must be rendered:\n{plain}"
         );
+        for (name, flake) in [("plain", &plain), ("labelled", &labelled)] {
+            for needle in [
+                "agent.otel.enable",
+                "agent.otel.endpoint",
+                "agent.otel.protocol",
+                "c.example",
+            ] {
                 assert!(
-            on_minimal
+                    !flake.contains(needle),
-                .contains("services.hyperhive.agent.otel.endpoint = \"https://c.example/otel\";"),
+                    "{name}: `{needle}` must not be rendered:\n{flake}"
-            "otel endpoint must be injected:\n{on_minimal}"
                 );
+            }
+        }
         assert!(
-            on_minimal.contains("services.hyperhive.agent.otel.protocol = \"grpc\";"),
+            !plain.contains("agent.otel.extraResourceAttributes"),
-            "otel protocol must be injected:\n{on_minimal}"
+            "extraResourceAttributes must not appear when unset:\n{plain}"
         );
-        // Optional fields absent when unset.
         assert!(
-            !on_minimal.contains("services.hyperhive.agent.otel.extraResourceAttributes"),
+            labelled.contains(
-            "extraResourceAttributes must not appear when unset:\n{on_minimal}"
-        );
-
-        assert!(
-            on_full.contains(
                 "services.hyperhive.agent.otel.extraResourceAttributes = \"deployment.environment=prod\";"
             ),
-            "extraResourceAttributes must be injected when set:\n{on_full}"
+            "extraResourceAttributes must be rendered when set:\n{labelled}"
-        );
-
-        assert!(
-            !off.contains("services.hyperhive.agent.otel"),
-            "no otel lines when disabled:\n{off}"
         );
     }
-
     #[test]
     fn render_flake_injects_github_disable_only_when_signalled() {
         // services.hyperhive.swarm.github.enable = false -> HYPERHIVE_GITHUB_DISABLED

hive-c0re/src/stats/otel_metrics.rs

@@ -3,7 +3,7 @@
 //! hive's own collector — the same first hop the agents use, named by the
 //! standard `OTEL_EXPORTER_OTLP_ENDPOINT` (see `nix/host-modules/hive-c0re`,
 //! which sets it to the collector's bridge address where agents get its
-//! swarm-wide name). No toggle of
+//! fixed name). No toggle of
 //! its own, and no credential: a hive's collector takes unauthenticated OTLP
 //! on the bridge, and the only hop that presents anything is the swarm tier's,
 //! which is the one that leaves the swarm.
@@ -100,8 +100,7 @@ fn build_provider(
     hyperhive_flake: &str,
 ) -> Result<SdkMeterProvider> {
     // http/json — the only OTLP transport this crate enables (matching
-    // hive-metric). The Claude SDK path honours `HYPERHIVE_OTEL_PROTOCOL` for
+    // hive-metric); this exporter is always http/json.
-    // its own export; this exporter is always http/json.
     //
     // The address is deliberately NOT passed here. The SDK reads
     // `OTEL_EXPORTER_OTLP_ENDPOINT` itself and appends the signal path

hive-c0re/src/test_env.rs

@@ -12,15 +12,15 @@
 //! sibling helper records why: two separate per-module mutexes serialise
 //! nothing against each other, and that produced a CI-only flake. The pair that
 //! motivated this one is `meta::tests` (which renders a flake from
-//! `HYPERHIVE_OTEL_*`) and `stats::otel_metrics::tests` (which asserts which
+//! `HYPERHIVE_OTEL_EXTRA_RESOURCE_ATTRIBUTES`) and `stats::otel_metrics::tests` (which asserts which
-//! variable enables the exporter) — different modules, same variable, same
+//! variable enables the exporter) — different modules, same process env, same
 //! binary.
 //!
 //! ⚠️ **A green local run is weak evidence for this class.** An agent container
 //! has the hyperhive variables ambient-set, so a losing race still finds a
 //! plausible value; the nix sandbox strips them, so there the race can delete a
 //! variable out from under another thread. Reproduce the sandbox shape with
-//! `env -u HYPERHIVE_OTEL_ENDPOINT cargo test -p hive-c0re`.
+//! `env -u OTEL_EXPORTER_OTLP_ENDPOINT cargo test -p hive-c0re`.
 
 use std::sync::{Mutex, MutexGuard, PoisonError};
 

hive-metric/README.md

@@ -20,7 +20,6 @@ The SDK reads standard OTEL environment variables automatically:
 - `OTEL_EXPORTER_OTLP_ENDPOINT` — collector URL (**required**)
 - `OTEL_RESOURCE_ATTRIBUTES` — resource labels (`k=v,...`)
 
-The harness populates both per-agent when
+The harness populates both in every agent container: an agent exports straight to
-`services.hyperhive.otel.enable = true`: an agent exports straight to
 its own hive's collector. See `docs/scheduler/observability.md` for
 the collector setup and the metrics hyperhive exports.

hive-metric/src/main.rs

@@ -7,8 +7,7 @@
 //! - `OTEL_EXPORTER_OTLP_HEADERS` — auth headers (`Key=Value,...`)
 //! - `OTEL_RESOURCE_ATTRIBUTES` — resource labels (`k=v,...`)
 //!
-//! The harness populates all of these per-agent when
+//! The harness populates all of these in every agent container.
-//! `services.hyperhive.otel.enable = true`.
 //!
 //! # Usage
 //! ```text
@@ -25,7 +24,7 @@ use opentelemetry_sdk::metrics::Temporality;
 #[derive(Parser)]
 #[command(
     name = "hive-metric",
-    about = "Push a labeled metric to the OTEL collector (requires services.hyperhive.otel.enable = true)",
+    about = "Push a labeled metric to the hive's OTEL collector",
     // Let a leading-minus value parse as the `value` positional rather than
     // being rejected as an unknown flag — negative gauges are legitimate
     // (e.g. a delta), and it lets the counter-sign check below produce a clear
@@ -90,7 +89,7 @@ fn main() -> Result<()> {
     if std::env::var("OTEL_EXPORTER_OTLP_ENDPOINT").is_err() {
         bail!(
             "OTEL_EXPORTER_OTLP_ENDPOINT not set — \
-             enable OTEL in NixOS config (services.hyperhive.otel.enable = true)"
+             an agent that sets services.hyperhive.agent.otel.enable = false has no collector"
         );
     }
 

nix/agent-modules/claude-settings.nix

@@ -15,8 +15,8 @@
 let
   userName = config.services.hyperhive.agent.user.name;
   homeDir = "/home/${userName}";
-  # Hive-wide OpenTelemetry config (host-driven; baked in per-agent by
+  # OpenTelemetry config (on by default; extra labels baked in per-agent by
-  # meta.rs `otel_config`). Options declared in `otel.nix`, which also
+  # meta.rs). Options declared in `otel.nix`, which also
   # exports the generic OTLP environment this container's producers read.
   otelCfg = config.services.hyperhive.agent.otel;
   # Base claude-code environment applied to every agent regardless of OTEL.

nix/agent-modules/otel.nix

@@ -1,5 +1,5 @@
-# OpenTelemetry wiring for an agent container: the per-agent options the
+# OpenTelemetry wiring for an agent container: the per-agent options (on by
-# meta flake injects (host-driven from `services.hyperhive.otel.*`) plus
+# default, exporting to the hive's collector by name) plus
 # `debug`, which the agent's own config sets, the
 # environment every OTLP producer inside the container reads, and the
 # collector that forwards this container's journal to the hive.
@@ -71,35 +71,35 @@ let
   logExporter = if cfg.protocol == "grpc" then "otlp" else "otlphttp";
 in
 {
-  # OTEL stats export is configured ONCE at host level via
+  # On by default: every hive runs a collector and answers
-  # `services.hyperhive.otel.*` (see nix/host-modules/otel.nix) and
+  # `hive-collector.hive` with its own bridge address, so the endpoint below
-  # injected into every agent's build by the meta-flake renderer
+  # is the same string in every agent on every hive and nothing is rendered
-  # (`hive-c0re/src/meta.rs::otel_config`). These per-agent options are
+  # into the meta flake. The port is the literal the host fixes at
-  # the build-time implementation surface that injection writes into;
+  # `services.hyperhive.swarm.hiveOtel.collectorPort` (read-only there).
-  # they are not meant to be set directly in an agent.nix. Marked
+  # Marked `internal`: these are not meant to be set in an agent.nix, except
-  # `internal` so the host option is the only documented operator knob.
+  # `debug`.
   options.services.hyperhive.agent.otel = {
     enable = lib.mkOption {
       type = lib.types.bool;
-      default = false;
+      default = true;
       internal = true;
       description = ''
         Export this agent's telemetry — Claude Code's stats (token
         usage, cost, tool calls) and anything pushed with
-        `hive-metric` — to an OTLP endpoint. Each agent exports
+        `hive-metric` — to the hive's collector. Each agent exports
-        directly to the hive's collector, so it keeps working even when
+        directly to it, so it keeps working even when hive-c0re is
-        hive-c0re is down. Host-driven: set
+        down.
-        `services.hyperhive.otel.enable` instead.
       '';
     };
 
     endpoint = lib.mkOption {
       type = lib.types.str;
-      default = "";
+      default = "http://hive-collector.hive:4318";
       internal = true;
       description = ''
         OTLP collector endpoint, set as `OTEL_EXPORTER_OTLP_ENDPOINT`.
-        Host-driven via `services.hyperhive.otel.endpoint`.
+        The name is the one `services.hyperhive.otel.collector.host`
+        holds, which the hive's resolver answers.
       '';
     };
 
@@ -113,7 +113,8 @@ in
       internal = true;
       description = ''
         OTLP wire protocol, set as `OTEL_EXPORTER_OTLP_PROTOCOL`.
-        Host-driven via `services.hyperhive.otel.protocol`.
+        The hive collector's receiver speaks OTLP/HTTP protobuf, so
+        the default is the only value that reaches it.
       '';
     };
 

nix/host-modules/deploy.nix

@@ -297,7 +297,7 @@ in
 
         Named `swarm-otel` rather than `otel` because there are two
         collectors and the tier is the whole distinction:
-        {option}`services.hyperhive.otel.enable` is the **hive-tier** one,
+        {option}`services.hyperhive.otel.collector.enable` is the **hive-tier** one,
         which every hive runs. A bare `deploy.otel` would not say which
         it meant. A hive that does not run the swarm collector still runs
         its own, and reaches this one by name at

nix/host-modules/glue-bao-readers-store-order.nix

@@ -41,7 +41,7 @@ let
     # ./otel.nix: `fetches`, the collector loading the file this unit writes
     # under the hive's own leaf.
     swarm-bao-hive-otel-oidc =
-      otel.enable
+      otel.collector.enable
       && hyperhiveCfg.hiveName != null
       && havePair baoDeploy.clientCertFile baoDeploy.clientKeyFile
       &&

nix/host-modules/glue-hive-otel-authelia.nix

@@ -31,7 +31,7 @@ let
   waits = senderAuth && !fetches;
 in
 {
-  config = lib.mkIf (hyperhiveCfg.deploy.authelia.enable && otel.enable && waits) {
+  config = lib.mkIf (hyperhiveCfg.deploy.authelia.enable && otel.collector.enable && waits) {
     systemd.services.hive-otel-client-secret = {
       after = [ "container@${autheliaMachine}.service" ];
       requires = [ "container@${autheliaMachine}.service" ];

nix/host-modules/hive-c0re/environment.nix

@@ -71,64 +71,34 @@ in
   # every agent. See services.hyperhive.swarm.github.enable.
   HYPERHIVE_GITHUB_DISABLED = "1";
 }
-// lib.optionalAttrs config.services.hyperhive.otel.enable (
+// {
-  # OTEL config (`swarm.hiveOtel`, `deploy.hive-controller.otel`, gated on
+  # hive-c0re's OWN container-resource exporter (stats/otel_metrics.rs) reads
-  # this hive's `otel.enable`) -> read by meta.rs::otel_config and injected
+  # the STANDARD OTLP variable — the same one hive-metric and every agent
-  # as build-time `services.hyperhive.agent.otel.*` into every agent.
+  # read — and lets the SDK resolve the URL, which appends the signal path
-  # Endpoint presence is the enable signal on the meta side; the
+  # (`/v1/metrics`). Handing the SDK an address programmatically instead
-  # optional fields are only emitted when set so absent values
+  # takes it verbatim: it POSTs to the collector's root, gets a 404 on every
-  # don't render no-op env lines.
+  # export, and says nothing, because OTLP export failures go to an error
-  let
+  # handler no binary here installs.
-    otel = config.services.hyperhive.otel;
-    hiveOtel = config.services.hyperhive.swarm.hiveOtel;
-    controllerOtel = config.services.hyperhive.deploy.hive-controller.otel;
-    # The first hop, this hive's own collector, under the two spellings its
-    # two kinds of caller need. Agents get the swarm-wide name, so their
-    # builds carry nothing hive-specific; this daemon gets the bridge
-    # address, because on the host the name may resolve to loopback
-    # (`gateway.localHostsEntry`), where the receiver does not listen.
-    agentFirstHop = "http://${otel.collector.host}:${toString hiveOtel.collectorPort}";
-    hostFirstHop = "http://${config.services.hyperhive.network.bridgeIp}:${toString hiveOtel.collectorPort}";
-  in
-  {
-    # `otel.endpoint` means "where telemetry ultimately goes" and keeps
-    # that meaning; what agents are handed is the *first hop*, which is
-    # always this hive's own collector. Deriving it rather than
-    # redefining `endpoint` is what lets every existing deployment keep
-    # its configured value untouched.
-    HYPERHIVE_OTEL_ENDPOINT = agentFirstHop;
-    # hive-c0re's OWN container-resource exporter (stats/otel_metrics.rs)
-    # reads the STANDARD OTLP variable — the same one hive-metric and every
-    # agent read — and lets the SDK resolve the URL, which appends the
-    # signal path (`/v1/metrics`). Handing the SDK an address
-    # programmatically instead takes it verbatim: it POSTs to the
-    # collector's root, gets a 404 on every export, and says nothing,
-    # because OTLP export failures go to an error handler no binary here
-    # installs — the daemon logged "exporter enabled" and never delivered a
-    # sample, for as long as it had that exporter. The variable above cannot
-    # replace this one:
-    # it is the agent-config transport meta.rs reads, and the SDK does not
-    # know that name.
-    OTEL_EXPORTER_OTLP_ENDPOINT = hostFirstHop;
-    # The first hop is the collector's OTLP/HTTP receiver, which speaks
-    # protobuf regardless of what the upstream wants — `otel.protocol`
-    # describes the *upstream* link, and the collector's own exporter is
-    # what has to honour it (see nix/host-modules/otel.nix).
-    HYPERHIVE_OTEL_PROTOCOL = "http/protobuf";
-  }
-  // lib.optionalAttrs (controllerOtel.extraResourceAttributes != "") {
-    HYPERHIVE_OTEL_EXTRA_RESOURCE_ATTRIBUTES = controllerOtel.extraResourceAttributes;
-  }
-  # HYPERHIVE_OTEL_HEADERS_CREDENTIAL is deliberately NOT emitted, and
-  # its absence is the security half of this design: that variable would
-  # put the upstream token into an agent's own settings.json. Nothing
-  # delivers the token into the container — no nspawn credential, no
-  # agent-readable header file.
   #
-  # The rule: the collector holding the credential achieves nothing while
+  # The bridge address, not `otel.collector.host`: on the host that name may
-  # anything else hands out a copy, so there is exactly one holder and it
+  # resolve to loopback (`gateway.localHostsEntry`), where the receiver does
-  # is on the host.
+  # not listen. Agents are not told an address at all; their module defaults
-)
+  # to the collector's name.
+  OTEL_EXPORTER_OTLP_ENDPOINT = "http://${config.services.hyperhive.network.bridgeIp}:${toString config.services.hyperhive.swarm.hiveOtel.collectorPort}";
+}
+//
+  lib.optionalAttrs
+    (config.services.hyperhive.deploy.hive-controller.otel.extraResourceAttributes != "")
+    {
+      HYPERHIVE_OTEL_EXTRA_RESOURCE_ATTRIBUTES =
+        config.services.hyperhive.deploy.hive-controller.otel.extraResourceAttributes;
+    }
+# No upstream credential is emitted here, and its absence is the security half
+# of this design: it would put the upstream token where an agent could read
+# it. Nothing delivers the token into a container — no nspawn credential, no
+# agent-readable header file. The collector holding the credential achieves
+# nothing while anything else hands out a copy, so there is exactly one
+# holder and it is on the host.
 // {
   # In-cluster forge URL — the gateway vhost (`forge.<domain>`), which
   # nginx proxies to forgejo. Used both for internal API calls in

nix/host-modules/hive-gateway/options.nix

@@ -320,7 +320,7 @@ in
       description = ''
         Loopback TCP port nginx serves its `stub_status` counters on, at
         `http://127.0.0.1:''${statusPort}/stub_status`. The hive's collector
-        ({option}`services.hyperhive.otel.enable`) reads it with its `nginx`
+        (every hive runs one) reads it with its `nginx`
         receiver.
 
         TCP rather than a unix socket because that receiver can only dial

nix/host-modules/hive-network.nix

@@ -55,7 +55,6 @@ let
       h.gateway.enable
       h.gateway.dns.enable
       h.network.enable
-      h.otel.enable
       h.snapshotStore.enable
     ];
 in

nix/host-modules/otel.nix

@@ -1,11 +1,8 @@
-# Hive-wide OTEL stats export, and the HIVE tier of the collector pair.
+# The HIVE tier of the collector pair: every hive runs one, on the host that
-# Set ONCE here at host level; the meta-flake renderer
+# runs hive-c0re (`deploy.hive-controller.enable`). Agents export to it at
-# (`hive-c0re/src/meta.rs::otel_config`) reads the HYPERHIVE_OTEL_* env
+# the fixed name `services.hyperhive.otel.collector.host`, which this hive's
-# exported off hive-c0re's unit (see ./hive-c0re) and injects the matching
+# resolver answers with its own bridge IP, so an agent's build carries
-# `services.hyperhive.agent.otel.*` build-time config into EVERY agent (mirroring the
+# nothing hive-specific.
-# CA-cert injection), so each agent's harness exports its own Claude Code
-# stats directly to the collector. There is no per-agent opt-in — this is
-# the single switch for the whole hive.
 #
 # This tier receives from this hive's agents and forwards to the swarm's
 # collector (./swarm-otel.nix). It holds no credential and picks no
@@ -41,6 +38,8 @@ let
   # The hive's own store identity. The collector authenticates to the swarm
   # as the hive, so it reads its secret as the hive: the hive leaf's policy
   # (`swarm-secret-client`'s `policy::render`) grants `swarm/hives/<hive>/*`.
+  runsHive = config.services.hyperhive.otel.collector.enable;
+
   hiveLeaf =
     config.services.hyperhive.deploy.bao.clientCertFile != null
     && config.services.hyperhive.deploy.bao.clientKeyFile != null;
@@ -55,39 +54,19 @@ in
       name = "hive-otel";
       consumers = [ "opentelemetry-collector" ];
       hostUnit = true;
-      enable = config.services.hyperhive.otel.enable;
+      enable = runsHive;
     })
-    (lib.mkRenamedOptionModule
+    (lib.mkRemovedOptionModule [ "services" "hyperhive" "otel" "enable" ] ''
-      [ "services" "hyperhive" "otel" "collector" "port" ]
+      Every hive runs its own telemetry collector, and every agent exports to
-      [ "services" "hyperhive" "swarm" "hiveOtel" "collectorPort" ]
+      it by default, so there is no switch. Remove this definition.
-    )
+    '')
+    (lib.mkRemovedOptionModule [ "services" "hyperhive" "otel" "collector" "port" ] ''
+      The hive collector's receiver port is fixed at 4318: agents dial that
+      literal. Remove this definition.
+    '')
   ];
 
   options.services.hyperhive.otel = {
-    enable = lib.mkEnableOption ''
-      hive-wide export of every agent's Claude Code stats (token usage,
-      cost, tool calls) to an OTLP endpoint via Claude Code's built-in
-      OpenTelemetry. One switch for all agents.
-
-      Enabling this also runs this hive's collector on the host: there is
-      exactly one way telemetry leaves this hive, and it is through that
-      collector. Agents export unauthenticated to
-      {option}`services.hyperhive.otel.collector.host`, a name this hive's
-      resolver answers with a bridge address only its own containers can
-      reach.
-
-      That collector forwards to the swarm's
-      ({option}`services.hyperhive.deploy.swarm-otel.enable`), which holds the
-      upstream credential and writes the swarm's store. So an agent never
-      sees the credential, and neither does this tier.
-
-      ⚠️ The collector is therefore in the path of all telemetry. It runs
-      on the same host as the agents and restarts on failure, and
-      telemetry is not the control plane, so degraded telemetry is not
-      degraded operation — but the export does not survive independently
-      of anything host-side
-    '';
-
     endpoint = lib.mkOption {
       type = lib.types.str;
       default = "";
@@ -171,25 +150,51 @@ in
       '';
     };
 
+    collector.enable = lib.mkOption {
+      type = lib.types.bool;
+      readOnly = true;
+      default =
+        config.services.hyperhive.deploy.hive-controller.enable
+        || config.services.hyperhive.deploy.allSwarmServices;
+      defaultText = lib.literalExpression "deploy.hive-controller.enable || deploy.allSwarmServices";
+      description = ''
+        Whether this host runs the hive tier's collector. Not a switch:
+        every host that runs a hive
+        ({option}`services.hyperhive.deploy.hive-controller.enable`) runs
+        one, and so does a host carrying all the swarm's shared services
+        ({option}`services.hyperhive.deploy.allSwarmServices`), whose own
+        containers export to it.
+
+        Agents export to it unauthenticated at
+        {option}`services.hyperhive.otel.collector.host`, a name this
+        hive's resolver answers with a bridge address only its own
+        containers can reach. It forwards to the swarm's collector
+        ({option}`services.hyperhive.deploy.swarm-otel.enable`), which holds
+        the upstream credential and writes the swarm's store, so neither an
+        agent nor this tier ever sees the credential.
+
+        ⚠️ The collector is in the path of all telemetry. It runs on the
+        same host as the agents and restarts on failure; telemetry is not
+        the control plane, so degraded telemetry is not degraded
+        operation, but the export does not survive independently of
+        anything host-side.
+      '';
+    };
+
     collector.host = lib.mkOption {
       type = lib.types.str;
       readOnly = true;
-      # Total on a null swarm domain, as in ./swarm-otel-service.nix: the
+      default = "hive-collector.hive";
-      # required-domain assertion should be what an operator sees.
-      default = "hive-collector.${
-        if config.services.hyperhive.swarm.domain == null then
-          "invalid"
-        else
-          config.services.hyperhive.swarm.domain
-      }";
-      defaultText = lib.literalExpression ''"hive-collector.''${services.hyperhive.swarm.domain}"'';
       description = ''
-        The name agents reach this hive's collector on. The same string on
+        The name agents reach this hive's collector on. A literal, the same
-        every hive: each hive's own resolver answers it with its own bridge
+        on every hive and in every swarm: each hive's own resolver answers
-        IP, so an agent's build carries no hive-specific address.
+        it with its own bridge IP, so an agent's build carries neither a
+        swarm domain nor a hive-specific address. The agent module's
+        `services.hyperhive.agent.otel.endpoint` default spells the same
+        name.
 
-        No hive can claim this name as its domain:
+        It sits outside every domain a hive or the swarm serves: a hive's
-        `nix/reserved-hive-fragments.nix` forbids `hive` in any hive name.
+        domain is `<hiveName>.<swarm.domain>`, so it never ends in `.hive`.
       '';
     };
 
@@ -274,12 +279,14 @@ in
     };
   };
 
-  # Shared by every hive's otel tier and its agents, so an agent's build
+  # Shared by every hive's otel tier and its agents. Read-only because the agent
-  # carries the same port whichever hive renders it.
+  # module's `otel.endpoint` default spells the same literal, and a host that
+  # moved the port would leave its agents dialling the old one.
   options.services.hyperhive.swarm.hiveOtel = {
     collectorPort = lib.mkOption {
       type = lib.types.port;
       default = 4318;
+      readOnly = true;
       description = ''
         Port of every hive collector's OTLP/HTTP receiver, at that hive's
         `services.hyperhive.network.bridgeIp`: the port agents dial at
@@ -307,7 +314,7 @@ in
     '';
   };
 
-  config = lib.mkIf config.services.hyperhive.otel.enable (
+  config = lib.mkIf runsHive (
     let
       otel = config.services.hyperhive.otel;
       autheliaCfg = config.services.hyperhive.swarm.authelia;
@@ -913,7 +920,7 @@ in
           # cleanly, retries forever, and reports nothing to anyone.
           assertion = senderAuth;
           message = ''
-            services.hyperhive.otel.enable is true but this hive has no
+            This hive runs a telemetry collector (every hive does) but has no
             identity to present to the swarm's collector:
 
               services.hyperhive.otel.clientSecretFile = ${
@@ -948,7 +955,7 @@ in
               "none"
             ]);
           message = ''
-            services.hyperhive.otel.enable is true, which runs a journald
+            This hive runs a telemetry collector, which runs a journald
             receiver reading /var/log/journal for hive-c0re's own crash-watch
             log line — but services.journald.storage is
             "${config.services.journald.storage}" on this host.

nix/host-modules/swarm-authelia.nix

@@ -60,7 +60,7 @@ let
   # Whether the swarm collector's client is actually registered here.
   #
   # Asked of the client list rather than re-derived from the conditions
-  # that produce it (`otel.enable`, a non-empty audience set, authelia
+  # that produce it (a non-empty audience set, authelia
   # being co-located). A second copy of that predicate is a second thing
   # to keep in step, and the two drifting is not a build failure: a rule
   # naming an unregistered client is refused by authelia's *startup*

nix/host-modules/swarm-bao.nix

@@ -1446,7 +1446,7 @@ let
   #
   # "Does the swarm have a collector" is not a question that can be false —
   # the swarm always has at least one instance of all the swarm level
-  # services — so gating the forwarder on `otel.enable` or
+  # services — so gating the forwarder on `otel.collector.enable` or
   # `deploy.swarm-otel.enable` would ask about the wrong host and render no
   # forwarder wherever the answer happened to be no.
   #

nix/host-modules/swarm-otel-service.nix

@@ -35,7 +35,7 @@ in
 {
   # `enable` is `services.hyperhive.deploy.swarm-otel.enable` — see ./deploy.nix.
   # ⚠️ That is the SWARM collector. The per-hive one keeps its own
-  # `services.hyperhive.otel.enable` (./otel.nix) and is a different
+  # `services.hyperhive.otel.collector.enable` (./otel.nix) and is a different
   # option entirely — every hive runs that one.
   options.services.hyperhive.swarm.otel = {
 

nix/host-modules/swarm-required-services.nix

@@ -49,10 +49,6 @@ in
   # host. Same switch, same rule, one attribute path.
   config.services.hyperhive.deploy.matrix.enable = lib.mkDefault deployCfg.allSwarmServices;
 
-  # The collector that feeds the pair above (note: no `swarm.` prefix,
-  # this is ./otel.nix's existing per-hive option).
-  config.services.hyperhive.otel.enable = lib.mkDefault deployCfg.allSwarmServices;
-
   # The rest of the shared services, from the same switch and for the same
   # reason.
   #

nix/host-modules/swarm-review-classifier.nix

@@ -97,7 +97,7 @@ let
   # where this host runs a hive-tier collector on the bridge. The daemon adds
   # the repo and the PR to each `claude` run's resource attributes, and to
   # each cost record's attributes.
-  otelEnv = lib.optionalAttrs otelCfg.enable {
+  otelEnv = lib.optionalAttrs otelCfg.collector.enable {
     CLAUDE_CODE_ENABLE_TELEMETRY = "1";
     OTEL_METRICS_EXPORTER = "otlp";
     OTEL_EXPORTER_OTLP_ENDPOINT = "http://${networkCfg.bridgeIp}:${toString hyperhiveCfg.swarm.hiveOtel.collectorPort}";

nix/module-eval/agent-otel.nix

@@ -47,7 +47,11 @@ let
     otel.metricIntervalMs = 10000;
   };
 
-  agentNoOtel = shared.agentBare;
+  # Sets nothing: what an agent gets on a hive, whose meta flake renders no
+  # otel line.
+  agentDefault = shared.agentBare;
+
+  agentNoOtel = agent { otel.enable = false; };
 
   agentSettings = machine: machine.services.opentelemetry-collector.settings;
   cases = [
@@ -100,11 +104,30 @@ let
         && p.exporters != [ ]
         && lib.all (e: (s.exporters ? ${e}) && s.exporters.${e}.endpoint == agentBridge) p.exporters;
     }
+    {
+      # 🎯 What the meta flake no longer says: an agent that sets nothing
+      # exports, to a name rather than an address. The name carries no swarm
+      # domain and no hive, so the same build is correct on every hive; the
+      # resolver of the hive it runs on answers it. `agentNoOtel` above is the
+      # control that these lookups find nothing where the switch is off.
+      name = "an agent with no otel config exports to the fixed hive-collector name by default";
+      ok =
+        let
+          endpoint = "http://hive-collector.hive:4318";
+          env = agentDefault.systemd.globalEnvironment;
+          s = agentSettings agentDefault;
+        in
+        agentDefault.services.hyperhive.agent.otel.enable
+        && env.OTEL_EXPORTER_OTLP_ENDPOINT == endpoint
+        && agentDefault.environment.variables.OTEL_EXPORTER_OTLP_ENDPOINT == endpoint
+        && lib.all (e: s.exporters.${e}.endpoint == endpoint) s.service.pipelines.logs.exporters
+        && !(agentNoOtel.systemd.globalEnvironment ? OTEL_EXPORTER_OTLP_ENDPOINT);
+    }
     {
       # Presence control for the two cases above: with the switch off there
       # is no collector in the container at all, so their passing is about
       # the wiring rather than about a unit that renders regardless.
-      name = "an agent that has not opted into telemetry runs no collector";
+      name = "an agent that switched telemetry off runs no collector";
       ok = !agentNoOtel.services.opentelemetry-collector.enable;
     }
     {

nix/module-eval/bao-otel-collector.nix

@@ -283,11 +283,11 @@ let
     {
       # The case the old hive-tier gate got wrong: this host runs the swarm's
       # collector and no hive collector at all, and the forwarder still exists
-      # with an address that resolves. Gated on `otel.enable` it rendered
+      # with an address that resolves. Gated on `otel.collector.enable` it rendered
       # nothing here, so the store's journal left no trace anywhere.
       name = "a store on a host with no hive collector still forwards";
       ok =
-        !baoWithCollector.services.hyperhive.otel.enable
+        !baoWithCollector.services.hyperhive.otel.collector.enable
         && (baoForwarder baoWithCollector).enable
         && (baoForwarder baoWithCollector).settings.exporters.otlphttp.endpoint != "";
     }

nix/module-eval/core-toggle.nix

@@ -233,18 +233,22 @@ let
         && e.HIVE_AGENT_NATS_URL == e.HIVE_C0RE_NATS_URL;
     }
     {
-      # What agents are handed lands in their builds, so it has to be the same
+      # Agents are handed no address at all: their module defaults to a
-      # on every hive: a name, which this hive's resolver answers with the
+      # literal name, the same on every hive and in every swarm, which this
-      # bridge IP its collector binds. hive-c0re itself keeps the address.
+      # hive's resolver answers with the bridge IP its collector binds.
-      name = "the agents' collector address is a swarm-wide name this hive resolves to its bridge";
+      # hive-c0re itself keeps the address. `HYPERHIVE_OTEL_ENDPOINT` is gone,
+      # and the bridge address next to it is the control that the lookup on
+      # the same attrset finds what is there.
+      name = "the agents' collector address is a fixed name this hive resolves to its bridge";
       ok =
         let
           e = allLocal.systemd.services.hive-c0re.environment;
           bridge = allLocal.services.hyperhive.network.bridgeIp;
         in
-        e.HYPERHIVE_OTEL_ENDPOINT == "http://hive-collector.t.local:4318"
+        !(e ? HYPERHIVE_OTEL_ENDPOINT)
         && e.OTEL_EXPORTER_OTLP_ENDPOINT == "http://${bridge}:4318"
-        && lib.elem "/hive-collector.t.local/${bridge}" allLocal.services.dnsmasq.settings.address;
+        && allLocal.services.hyperhive.otel.collector.host == "hive-collector.hive"
+        && lib.elem "/hive-collector.hive/${bridge}" allLocal.services.dnsmasq.settings.address;
     }
     {
       # The agents mint against the swarm's IdP, the same endpoint the hive's

nix/module-eval/hive-otel.nix

@@ -19,6 +19,7 @@ let
         ;
     })
     hive
+    hiveWithController
     runGroup
     otelSettings
     ;
@@ -27,24 +28,22 @@ let
   # tier's, which lives in a container and is read through `otelSettings`.
   # The IdP is here too, with a hand-named secret file: the collector's wait
   # for that file exists beside authelia's container.
-  hiveOtel = hive {
+  hiveOtel = hiveWithController {
-    otel.enable = true;
     otel.clientSecretFile = "/var/lib/hive-otel-oidc/client.secret";
     deploy.authelia.enable = true;
   };
 
   # A hive holding its own store leaf, placed by hand, and naming no secret
   # file: the collector's secret comes from the store under that leaf.
-  hiveOtelLeaf = hive {
+  hiveOtelLeaf = hiveWithController {
-    otel.enable = true;
+    gateway.enable = false;
     deploy.bao.clientCertFile = "/etc/pki/hive.pem";
     deploy.bao.clientKeyFile = "/etc/pki/hive-key.pem";
   };
 
   # The IdP, the store and the collector on one host: the publisher that
   # writes the secret and the unit that reads it, in one config.
-  hiveOtelAllLocal = hive {
+  hiveOtelAllLocal = hiveWithController {
-    otel.enable = true;
     deploy.bao.enable = true;
     deploy.authelia.enable = true;
   };
@@ -144,7 +143,7 @@ let
     {
       # The receiver, the pipeline entry and the nginx server it reads have to
       # agree on one address, and none of them may exist without a gateway on
-      # the host. `hiveOtelLeaf` is the control: it runs no gateway, and the
+      # the host. `hiveOtelLeaf` is the control: it opts out of the gateway, and the
       # clause asserting that keeps the control from going vacuous.
       name = "the hive collector reads the gateway's stub_status, and only where a gateway runs";
       ok =

nix/module-eval/lib.nix

@@ -221,7 +221,7 @@ let
     in
     {
       matrix = h.deploy.matrix.enable;
-      otel = h.otel.enable;
+      otel = h.otel.collector.enable;
       authelia = h.deploy.authelia.enable;
       nats = h.deploy.nats.enable;
       swarm-otel = h.deploy.swarm-otel.enable;

nix/module-eval/shared.nix

@@ -99,10 +99,9 @@ in
   };
 
   # `clientSecretFile` is what ../host-modules/otel.nix's identity assertion
-  # demands of any hive with the tier on.
+  # demands of any host running a hive.
-  baoWithHiveOtel = hive {
+  baoWithHiveOtel = hiveWithController {
     deploy.bao.enable = true;
-    otel.enable = true;
     otel.clientSecretFile = "/var/lib/hive-otel-oidc/client.secret";
   };
 

nix/module-eval/swarm-services-switch.nix

@@ -50,7 +50,6 @@ let
     deploy.hive-controller.enable = false;
     deploy.allSwarmServices = true;
     deploy.matrix.enable = false;
-    otel.enable = false;
     deploy.authelia.enable = false;
     deploy.nats.enable = false;
     deploy.swarm-otel.enable = false;