cccb/schild
cccb/schild
12
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity

Update README.md

Browse source
This commit is contained in:
Ricardo Band 2023-03-22 21:16:41 +01:00 committed by GitHub
parent 432c847b5c
commit a0f381c049
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 45 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

47
README.md
View file

@ -1,5 +1,48 @@
# cccb-schild
# CCCB street sign
CCCB street sign electronics
## Electronics
[![](https://github.com/cccb/cccb-schild/raw/main/electronics.drawio.svg)](https://app.diagrams.net/?mode=github#Hcccb%2Fcccb-schild%2Fmain%2Felectronics.drawio.svg)
The Microcontroller used is a [Olimex ESP32-POE-EA-IND](https://www.olimex.com/Products/IoT/ESP32/ESP32-POE/open-source-hardware) which supports Ethernet connectivity and POE. This simplified the power management and connectivity.
Instead of a normal level shifter, a [Diodes 74AHCT1G126](https://www.diodes.com/assets/Datasheets/74AHCT1G126.pdf) is used.
For the LEDs, WS2815 was choosen. They operate with 12V power so the strips can be as long as needed without complicated power feeds. The [LEDs](https://www.aliexpress.com/item/32961181562.html) and [power supply](https://www.aliexpress.com/item/4001260747482.html) are from [BTF Lightning](https://btf-lighting.aliexpress.com/).
## Firmware
The firmware used is [WLED](https://kno.wled.ge/).
These instruction are proably outdated, so please check with the official guide [here](https://kno.wled.ge/basics/install-binary/).
### Flash via web
Go to `https://install.wled.me/` and choose the latest version. Also check `My board has Ethernet`. Then follow the procedure.
### Flash via terminal
If you don't trust WebUSB (and you shouldn't), get the latest firmware release from [Github](https://github.com/Aircoookie/WLED/releases). The file you need is called `WLED_0.13.3_ESP32_Ethernet.bin` (with the version being the newest). Also download the newest bootloader file. At the time of writing this is version 4. You can find it [here](https://github.com/Aircoookie/WLED/releases/download/v0.13.1/esp32_bootloader_v4.bin).
Then install [esptool](https://github.com/espressif/esptool). Your Distribution probably comes with it, so try `apt install esptool` or similar.
Flash it to the ESP32 with these commands:
```shell
# Erase the current flash contents (this will also delete your current config)
esptool.py erase_flash
# Flash the bootloader
esptool.py write_flash 0x0 esp32_bootloader_v4.bin
# Flash the WLED firmware
esptool.py write_flash 0x10000 WLED_0.13.3_ESP32_Ethernet.bin
```
When this is done the ESP32 should open a wifi called `WLED-AP`. The password is `wled1234`. Connect to it and configure Ethernet and disable wifi. The ESP32 should receive it's designated IP address as long as the MAC address doesn't change. If it does tell the DHCP admin the new MAC address so they can update the entry in DHCP it.
To be continued...
---
Made with ❤️ and ✨ by [XenGi](https://github.com/xengi).